574589 Festo Electrical Connectors

Name: 574589
Brand: Festo

Part#:574589

Manufacturer:Festo

Category:Electrical Connectors

Alt. Part#:NECU-S1W9-C2-APB

Product Lifecycle:Active

Get a quick Quote!

plug NECU-S1W9-C2-APB Mounting type: 4-40 UNC-2B, Fieldbus interface: Sub-D, 9-pin, socket, Electrical connection 1: Sub-D plug, 9-pin, Electrical connection 2: IDC terminal, Baud rate: 12 Mbit/s

About the manufacturer: Festo is one of the manufacturers that offers Electrical Connectors that you can order at Powermatic Associates site. Festo Corp. has been a top supplier of automation and intelligent automation solutions for more than four decades in the United States and eight decades globally. The company is committed to transforming the manufacturing sector and enhancing business efficiency.

Check out the 574589 Festo price in the box on the right side or send a quick quote.

Product Details

Type of mounting
4-40 UNC-2B
Connection cross section
0.08 mm² ... 0.5 mm²
Relative air humidity
75 % at 25 °C
Approved cable diameter
8 mm
Baud rate
12 Mbit/s
Electrical connection 1
Sub-D plug, 9-pin
Housing material
PC-reinforced
Type code
NECU
Electrical connection 2
IDC terminal
Ambient temperature
-20 °C ... 70 °C
Note on materials
RoHS-compliant
Fieldbus interface
Sub-D, 9-pin, socket
Degree of protection
IP20
Corrosion resistance class (CRC)
1 - Low corrosion stress

Product condition

New Factory Sealed

New Factory Sealed - New condition, never used, original OEM part with original packaging and factory seal.

Recommended parts

QOB210

Square D by Schneider Electric QOB210 is a Miniature Circuit Breaker (MCB) designed for bolt-on mounting. It features a rated current of 10A and accommodates a bolt-on connection type. This MCB is compatible with a voltage rating of 48Vdc and 120V/240V AC, supporting a cross-section of 14-8AWG for 1 cable Al/Cu. It is a 2 Pole device with a short circuit breaking rating of 10kA at 240Vac and 5kA at 48Vdc. The terminals are of the press plate type.

Schneider Electric

EL1809

Beckhoff HD Ethercat Terminal, 16 Chnnl

Beckhoff

GV2P14

Schneider Electric GV2P14 is a Motor Protection Circuit Breaker (MPCB) within the GV2P sub-range, designed for thermal-magnetic motor protection and manual motor starting. It features 3 poles and provides protection functions against short-circuit and thermal overload. The rated current range is 6 - 10 A, with a rated insulation voltage (Ui) of 690 V. This MPCB is designed for DIN rail or mounting plate installation, has a net width of 45 mm, and is operated via a rotary knob. Protection settings for short-circuit pickup current are fixed at 138A. The rated impulse voltage (Uimp) is 6 kV, and it supports rated active powers of 3 kW at 400/415Vac, 5 kW at 500Vac, and 5.5 kW at 690Vac. The trip current rating is 10 AT, with a frame current rating of 32 AF. It boasts a mechanical durability of 100,000 operations at no load and an electrical durability of 100,000 operations at 415Vac in AC-3 condition. Connection is facilitated through screw-clamp terminals. The rated voltage for phase-to-phase is 690 V, with all three poles protected. The trip unit type is thermal-magnetic, supporting a minimum current of 6 A and a maximum current of 10 A, classified under utilisation category A AC-3.

Schneider Electric

RSM-2RKM 40

RSM-2RKM 40 Turck - RSM-2RKM 40 Actuator and Sensor Tee, T-Splitter without Cable

Turck

333

53113530

53113530 - LAPP SKINTOP® COLD Strain Relief Cable Gland - M25 x 1.5

Lapp