574429 Festo Directional Control Valves

Name: 574429
Brand: Festo

Part#:574429

Manufacturer:Festo

Category:Directional Control Valves

Alt. Part#:VUVG-L18-M52-MT-G14-1P3

Product Lifecycle:Active

Get a quick Quote!

solenoid valve VUVG-L18-M52-MT-G14-1P3 Valve function: 5/2 monostable, Type of actuation: electrical, Valve size: 18 mm, Standard nominal flow rate: 1300 l/min, Operating pressure: 3 - 8 bar

About the manufacturer: Festo is one of the manufacturers that offers Directional Control Valves that you can order at Powermatic Associates site. Festo Corp. has been a top supplier of automation and intelligent automation solutions for more than four decades in the United States and eight decades globally. The company is committed to transforming the manufacturing sector and enhancing business efficiency.

Check out the 574429 Festo price in the box on the right side or send a quick quote.

Product Details

Lap
Indefinite overlap
Standard nominal flow rate
1300 l/min
Certification
RCM compliance mark c UL us - Recognized (OL)
Exhaust air function
With flow control option
Symbol
00991003
Duty cycle
100%
Information on operating and pilot media
Operation with oil lubrication possible (required for further use)
Product weight
154 g
Note on materials
RoHS-compliant
Valve function
5/2, monostable
Actuation type
Electrical
Design
Piston gate valve
Nominal width
6.9 mm
Mounting position
Any
Pilot air supply port
Internal
On switching time
10 ms
Operating medium
Compressed air as per ISO 8573-1:2010 [7:4:4]
Restricted ambient and media temperature
-5 - 50 °C Without holding power reduction
Electrical connection
Via electrical sub-base
Ambient temperature
-5 °C ... 60 °C

Pneumatic working port

G1/4

Operating voltage

24V DC

Type of control

Pilot-controlled

Max. positive test pulse with 0 signal

700 µs

Permissible voltage fluctuations

+/- 10 %

Shock resistance

Shock test with severity level 2 as per FN 942017-5 and EN 60068-2-27

Temperature of medium

-5 °C ... 60 °C

Pneumatic connection 1

G1/4

Pneumatic connection 4

G1/4

Housing material

Wrought aluminum alloy

Operating pressure

3 bar ... 8 bar

Reset method

Mechanical spring

Sealing principle

Soft

Pilot pressure

3 bar ... 8 bar

Seals material

HNBR NBR

Pilot pressure MPa

0.3 MPa ... 0.8 MPa

Valve size

18 mm

Degree of protection

IP40 With plug socket

Type code

VUVG

Manual override

Detenting Covered

Switching time off

45 ms

Max. negative test pulse on 1 signal

900 µs

Coil characteristics

24 V DC: 1.0 W 24 V DC: low-current phase 0.3 W, high-current phase 1.0 W

Vibration resistance

Transport application test with severity level 2 as per FN 942017-4 and EN 60068-2-6

Corrosion resistance class (CRC)

2 - Moderate corrosion stress

Type of mounting

Optionally: With through-hole

Pneumatic connection 2

G¼

Pneumatic connection 5

G1/4

Product condition

New Factory Sealed

New Factory Sealed - New condition, never used, original OEM part with original packaging and factory seal.

Recommended parts

UBC10.241

PULS UBC10.241 is an Uninterruptible Power Supply (UPS) control module within the U-series, featuring a built-in battery with a 50% power reserve and a green status LED. This module is housed in aluminium and utilizes spring-clamp connections for installation. It measures W123mm x H124mm x D119mm and operates on a supply voltage range of 22.5Vdc to 30Vdc, with a nominal 24Vdc. The rated current is 10A at 22.5Vdc and can reach up to 15A in buffer mode for less than 5 seconds at full output voltage. It supports DIN rail mounting and can operate in ambient air temperatures ranging from 0 to +40°C. The current consumption is 1.1A at a 24Vdc input, and it is designed for DC networks. Visual position indicators include Ready, Buffering, Inhibit, and Replace Battery. Protection functions include output overvoltage protection with a typical 32Vdc and a maximum of 35Vdc, and overload/short-circuit protection with a minimum of 17.9A and a maximum of 21A at load impedance. It is advised not to use the DC-UPS in parallel to increase output power, but paralleling two units for 1+1 redundancy is possible for higher system reliability. The output voltage is regulated at 22.5Vdc in buffer mode with a 23Vdc turn-ON. The efficiency is rated at 0.978 with a 24Vdc input, and the rated power is 360W at 24Vdc and 240W/360W in buffer mode. Power dissipation/losses are 2.9W with a 24Vdc input at 0A output current and 5.5W at 10A output current. Ripple is maintained at 20mVpp across a frequency range of 20Hz to 20MHz at 50Ω. The electrical durability is rated at 137400 hours at 40°C with a 10A output and 24Vdc input, equivalent to 15 years or 131400 hours at both 40°C with a 5A output and 25°C with a 10A output.

Puls

QO1HPL

Square D by Schneider Electric QO1HPL is a padlocking device designed for loose attachment, primarily serving the function of locking.

Schneider Electric

CS5.241

PULS CS5.241 AC/DC Power Supply, 5A, 120W, 24DC output, 100-120 VAC input

Puls

DKF 28-27-1

DKF 28-27-1 Turck - DKF 28-27-1 Actuator and Sensor Receptacle, Front Mount

Turck

212

G10S0000

Red Lion G10S0000 is an HMI / Display unit from the HMI Rugged Graphite series designed for both indoor and outdoor use. It features an HMI operator touchscreen panel with a connection interface that includes 1 x RJ45 port for Ethernet, 2 x RJ11 ports for RS-232, and 1 x RJ45 port supporting both RS-422 and RS-485 communication protocols. The unit operates on a supply voltage range of 10-30Vdc, accommodating both 12Vdc and 24Vdc systems. It is engineered to function within an ambient air temperature range of -20 to +60 °C and offers a degree of protection rated at IP66 and NEMA 4X. The G10S0000 is equipped with 7 module slots for connection capacity, and its power consumption is typically 18 W, with a maximum of 53 W. The electrical durability of the backlight is rated at 35,000 hours. For storage, it includes an SD card slot, and it boasts a brightness level of 2500cd/m2.

Red Lion

S29371

Square D by Schneider Electric S29371 is a locking device designed for fixed OFF or ON locking. It functions as a padlocking device, ensuring secure locking capabilities. The dimensions of this part are a net width of 60 mm, a net height of 21 mm, and a net depth of 59 mm.

Schneider Electric