560906 Festo Servo Motors

Product Details

• Rotor position sensor interface
  EnDat® 22
• Nominal rotary speed
  2000 1/min
• DC nominal voltage
  565 V
• Rating class according to EN 60034-1
  S1
• Ambient temperature
  -10 °C ... 40 °C
• Permissible axial shaft load
  200 N
• Electrical connection technology
  Plug
• Featherkey shaft design
  DIN 6885 A 8 x 7 x 40
• Type code
  EMMS-AS
• Temperature monitoring
  PTC resistor
• Max. rotational speed
  2460 1/min
• Rotor position sensor resolution
  19 bit
• Type of winding switch
  Star inside
• Relative air humidity
  0 - 90 %
• Brake holding torque
  18 Nm
• Peak torque
  48.8 Nm
• MTTF, subcomponent
  76 years, rotor position sensor 4469 years, holding brake
• Note on materials
  RoHS-compliant
• Number of pole pairs
  6
• Rotor position sensor measuring principle
  Inductive
Brake power consumption
15.6 W
Phase-phase winding resistance
1.41 Ohm
Peak current
20 A
Brake mass moment of inertia
1.082 kgcm²
Permissible radial shaft load
1060 N
Product weight
17000 g
Insulation protection class
F
Motor nominal power
4420 W
Motor nominal current
7.8 A
Voltage constant, phase-to-phase
162.39 mVmin
Corrosion resistance class (CRC)
2 - Moderate corrosion stress
Storage temperature
-20 °C ... 60 °C
Stall torque
25.48 Nm
MTTFd, subcomponent
152 years, rotor position sensor
Conforms to standard
IEC 60034
Rotor position sensor
Absolute encoder, multi-turn
Brake DC operating voltage
24 V
Motor constants
2.72 Nm/A
Winding inductance phase-phase
13.44 mH
CE marking (see declaration of conformity)
As per EU EMC directive As per EU low voltage directive
Degree of protection
IP54
Total output inertia moment
20.108 kgcm²
Certification
RCM compliance mark c UL us - Recognized (OL)
Nominal torque
20.05 Nm
Switching cycles, holding brake
5 million idle actuations (without friction work!)

560906 Related Documents