560905 Festo Servo Motors

Name: 560905
Brand: Festo

Part#:560905

Manufacturer:Festo

Alt. Part#:EMMS-AS-140-LK-HS-RSB

Product Lifecycle:Active

Get a quick Quote!

servo motor EMMS-AS-140-LK-HS-RSB Without gear unit. Ambient temperature: -10 - 40 °C, Storage temperature: -20 - 60 °C, Relative air humidity: 0 - 90 %, Conforms to standard: IEC 60034, Insulation protection class: F

About the manufacturer: Festo is one of the manufacturers that offers Servo Motors that you can order at Powermatic Associates site. Festo Corp. has been a top supplier of automation and intelligent automation solutions for more than four decades in the United States and eight decades globally. The company is committed to transforming the manufacturing sector and enhancing business efficiency.

Check out the 560905 Festo price in the box on the right side or send a quick quote.

Product Details

Number of pole pairs
6
Rotor position sensor measuring principle
Inductive
Brake DC operating voltage
24 V
Motor constants
2.72 Nm/A
Motor nominal current
7.8 A
Type of winding switch
Star inside
Type code
EMMS-AS
Temperature monitoring
PTC resistor
Nominal rotary speed
2000 1/min
Motor nominal power
4420 W
Voltage constant, phase-to-phase
162.39 mVmin
Max. rotational speed
2460 1/min
Rotor position sensor resolution
18 bit
Peak current
20 A
Relative air humidity
0 - 90 %
Total output inertia moment
20.108 kgcm²
Switching cycles, holding brake
5 million idle actuations (without friction work!)
Featherkey shaft design
DIN 6885 A 8 x 7 x 40
Rotor position sensor
Absolute encoder, single-turn
Insulation protection class
F

DC nominal voltage

565 V

Winding inductance phase-phase

13.44 mH

Corrosion resistance class (CRC)

2 - Moderate corrosion stress

Certification

RCM compliance mark c UL us - Recognized (OL)

Peak torque

48.8 Nm

Permissible radial shaft load

1060 N

Electrical connection technology

Plug

Rotor position sensor interface

EnDat® 22

Brake power consumption

15.6 W

Phase-phase winding resistance

1.41 Ohm

Rating class according to EN 60034-1

Degree of protection

IP54

Stall torque

25.48 Nm

MTTFd, subcomponent

152 years, rotor position sensor

Note on materials

RoHS-compliant

CE marking (see declaration of conformity)

As per EU EMC directive As per EU low voltage directive

Ambient temperature

-10 °C ... 40 °C

Brake holding torque

18 Nm

MTTF, subcomponent

76 years, rotor position sensor 4469 years, holding brake

Product weight

17000 g

Storage temperature

-20 °C ... 60 °C

Brake mass moment of inertia

1.082 kgcm²

Nominal torque

20.05 Nm

Permissible axial shaft load

200 N

Conforms to standard

IEC 60034

Product condition

New Factory Sealed

New Factory Sealed - New condition, never used, original OEM part with original packaging and factory seal.

Relevant products

560947

Verified stock: 5

end plate VMPAL-EPR-SP Width: 28,8 mm, Length: 107,3 mm, Integrated function: Pilot air selector for choosing the pilot air supply (internal or external), Flow direction: reversible, Valve terminal structure: Valve sizes can be mixed

Festo

566496

Verified stock: 2

solenoid valve VUVG-L14-T32C-AT-G18-1P3 Valve function: 2x3/2 closed, monostable, Type of actuation: electrical, Valve size: 14 mm, Standard nominal flow rate: 560 l/min, Operating pressure: 1,5 - 8 bar

Festo

DGST-10-80-Y12A

Verified stock: 0

Festo 8085169, Mini slide, configuration: DGST-10-80-Y12A

Festo

DGST-8-50-Y12A

Verified stock: 0

Festo Mini slide DGST-10-50-Y12A Stroke: 50 mm, Adjustable end-position range/front length: 15,1 mm, Adjustable end-position range/rear length: 15,3 mm, Piston diameter: 10 mm, Operating mode of drive unit: Yoke

Festo

DGST-16-150-Y12A

Verified stock: 0

Festo 8085182, Mini slide, configuration: DGST-16-150-Y12A

Festo

What can I help you find today?

Recommended parts

GV2P14

Schneider Electric GV2P14 is a Motor Protection Circuit Breaker (MPCB) within the GV2P sub-range, designed for thermal-magnetic motor protection and manual motor starting. It features 3 poles and provides protection functions against short-circuit and thermal overload. The rated current range is 6 - 10 A, with a rated insulation voltage (Ui) of 690 V. This MPCB is designed for DIN rail or mounting plate installation, has a net width of 45 mm, and is operated via a rotary knob. Protection settings for short-circuit pickup current are fixed at 138A. The rated impulse voltage (Uimp) is 6 kV, and it supports rated active powers of 3 kW at 400/415Vac, 5 kW at 500Vac, and 5.5 kW at 690Vac. The trip current rating is 10 AT, with a frame current rating of 32 AF. It boasts a mechanical durability of 100,000 operations at no load and an electrical durability of 100,000 operations at 415Vac in AC-3 condition. Connection is facilitated through screw-clamp terminals. The rated voltage for phase-to-phase is 690 V, with all three poles protected. The trip unit type is thermal-magnetic, supporting a minimum current of 6 A and a maximum current of 10 A, classified under utilisation category A AC-3.

Schneider Electric

SSM1A130BD

Schneider Electric SSM1A130BD is a solid state relay (SSR) within the SSM sub-range, designed to facilitate solid state/static relay functions. It operates with a control voltage (DC) range of 4-32 Vdc and can handle a rated current of 30 A. The relay is suitable for applications requiring a rated voltage (AC) from phase-to-neutral within the range of 24-280 V.

Schneider Electric

LC1D95M7

Schneider Electric LC1D95M7 is a magnetic contactor from the Deca sub-range, featuring screw connections and three poles (3P; 3NO). It has a rated current of 125A (AC-1) and 95A (440Vac; AC-3), with a mounting mode designed for DIN rail installation. The net width of the contactor is 85 mm, and it offers a degree of protection rated at IP20. The control voltage (AC) ranges from 176-242Vac (220Vac nom.; 50Hz; 0.8...1.1 x Uc) to 187-242Vac (220Vac nom.; 60Hz; 0.85...1.1 x Uc), with a rated operating voltage (Ue) of 1000 V. It includes 1 normally open (NO) auxiliary contact and 1 normally closed (NC) auxiliary contact, both of the instantaneous type (1NO+1NC). The rated impulse voltage (Uimp) is 8 kV. This contactor is capable of handling rated active power ranging from 25kW (220-230Vac; AC-3) to 55kW (500Vac; AC-3), with specific ratings for various voltages up to 1000Vac. It also supports rated power (HP) for motors from 7.5HP (115Vac; single-phase) to 60HP (575-600Vac; 3-phase), under UL/CSA standards. The mechanical durability of the LC1D95M7 is rated at 4,000,000 operations, and its electrical durability (with load) is rated at 1,200,000 operations. The rated voltage (AC) for phase-to-phase connections is 1000 V.

Schneider Electric

M9F43303

Schneider Electric M9F43303 is a Miniature Circuit Breaker (MCB) within the C60BP sub-range, designed with a 3-pole configuration. It has a rated current of 3A and features a rated insulation voltage (Ui) of 500V. This MCB operates with a rated voltage of 60Vdc and has a rated impulse voltage (Uimp) of 6kV. It offers a short circuit breaking rating of 14kA AIR at both 120Vac and 240Vac, and 10kA AIR at 480Y/277Vac and 60Vdc. The rated voltage for AC applications is 240V phase-to-neutral and 415V phase-to-phase. All three poles are protected, and it is equipped with a D tripping curve.

Schneider Electric

PKGTAB

Schneider Electric PKGTAB, Load center accessory, QO/Homeline, insulator kit, for ground bars

Schneider Electric