560901 Festo Servo Motors

Product Details

• Type code
  EMMS-AS
• Rotor position sensor measuring principle
  Inductive
• Nominal rotary speed
  2600 1/min
• Brake power consumption
  15.6 W
• Motor nominal current
  4.4 A
• Peak current
  15 A
• Voltage constant, phase-to-phase
  130.69 mVmin
• Number of pole pairs
  6
• Brake DC operating voltage
  24 V
• Motor constants
  2.166 Nm/A
• Phase-phase winding resistance
  3.39 Ohm
• Type of winding switch
  Star inside
• CE marking (see declaration of conformity)
  As per EU EMC directive As per EU low voltage directive
• Ambient temperature
  -10 °C ... 40 °C
• Degree of protection
  IP54
• Brake holding torque
  18 Nm
• MTTF, subcomponent
  76 years, rotor position sensor 4469 years, holding brake
• Switching cycles, holding brake
  5 million idle actuations (without friction work!)
• Featherkey shaft design
  DIN 6885 A 8 x 7 x 40
• Rotor position sensor
  Absolute encoder, single-turn
Max. rotational speed
3060 1/min
Insulation protection class
F
DC nominal voltage
565 V
Winding inductance phase-phase
20.5 mH
Corrosion resistance class (CRC)
2 - Moderate corrosion stress
Total output inertia moment
9.271 kgcm²
Nominal torque
9.55 Nm
Stall torque
11.32 Nm
Rotor position sensor interface
EnDat® 22
Temperature monitoring
PTC resistor
Motor nominal power
2600 W
Rotor position sensor resolution
18 bit
Rating class according to EN 60034-1
S1
Certification
RCM compliance mark c UL us - Recognized (OL)
Brake mass moment of inertia
1.082 kgcm²
Permissible axial shaft load
200 N
Product weight
10400 g
Note on materials
RoHS-compliant
Relative air humidity
0 - 90 %
Storage temperature
-20 °C ... 60 °C
Peak torque
25.6 Nm
Permissible radial shaft load
780 N
MTTFd, subcomponent
152 years, rotor position sensor
Conforms to standard
IEC 60034
Electrical connection technology
Plug

560901 Related Documents