553176 Festo Quarter Turn Actuators

Name: 553176
Brand: Festo

Part#:553176

Manufacturer:Festo

Alt. Part#:DAPS-0106-090-R-F0507-T6

Product Lifecycle:Active

Get a quick Quote!

semi-rotary drive DAPS-0106-090-R-F0507-T6 double-acting, air connection to VDI/VDE 3845 Namur valves, direct flange mounting, version with handwheel, low temperature version. Size of actuator: 0106, Flange hole pattern: (* F05, * F07), Swivel angle: 90 d

About the manufacturer: Festo is one of the manufacturers that offers Quarter Turn Actuators that you can order at Powermatic Associates site. Festo Corp. has been a top supplier of automation and intelligent automation solutions for more than four decades in the United States and eight decades globally. The company is committed to transforming the manufacturing sector and enhancing business efficiency.

Check out the 553176 Festo price in the box on the right side or send a quick quote.

Product Details

Design
Scotch yoke system
Safety integrity level (SIL)
Up to SIL 2 high demand mode Up to SIL 2 low demand mode
Explosive ambient temperature
-50°C <= Ta <= +60°C
Torque at nominal operating pressure and 0° swivel angle
106 Nm
Air consumption at 6 bar per cycle 0°-nominal swivel angle-0°
3.85 l
Pneumatic connection
G1/8
Material of screws
High-alloy steel
Swivel angle
90 deg
Type code
DAPS
Position sensing
None
Nominal operating pressure
5.6 bar
Information on operating and pilot media
Operation with oil lubrication possible (required for further use)
Product weight
2500 g
Cover material
Wrought aluminum alloy
Material number for shaft
1.4305
Flange hole pattern
F05 F07
Standard connection for valve
ISO 5211
Mounting position
Any
Valve connection conforms to standard
VDI/VDE 3845 (NAMUR)
Type of ignition protection for gas
Ex h IIC T6...T3 Gb X

Ambient temperature

-50 °C ... 60 °C

Corrosion resistance class (CRC)

3 - High corrosion stress

Torque at nominal operating pressure and 90° swivel angle

80 Nm

Seals material

FVMQ PTFE-reinforced

End-position adjusting range at 0°

-1 deg ... 9 deg

Mode of operation

Double-acting

Closing direction

Clockwise closing

ATEX category gas

II 2G

ATEX category for dust

II 2D

Explosion prevention and protection

Zone 1 (ATEX) Zone 22 (ATEX)

Note about the torque

The actuator's operating torque must not be higher than the maximum permissible torque listed in ISO 5211, based on the size of the mounting flange and the coupling.

Note on materials

Contains paint-wetting impairment substances RoHS-compliant

Housing material

Wrought aluminum alloy

Size of valve actuator

0106

Depth shaft connection

19.3 mm

Cushioning

No cushioning

Symbol

00991265

Operating pressure

3 bar ... 8.4 bar

Type of (ignition) protection for dust

Ex h IIIC T85°C...T200°C Db X

Operating medium

Compressed air as per ISO 8573-1:2010 [7:4:4]

Torque at nominal operating pressure and 50° swivel angle

53 Nm

CE marking (see declaration of conformity)

as per EU explosion protection directive (ATEX)

Shaft connection

T17

Shaft material

High-alloy steel

Product condition

New Factory Sealed

New Factory Sealed - New condition, never used, original OEM part with original packaging and factory seal.

Relevant products

553143

Verified stock: 1

filter cartridge VAF-DB-P-3/8-1/2 for vacuum filter VAF Mounting type: Plug-in, Materials note: (* Contains PWIS substances, * Conforms to RoHS), Material filter: PE

Festo

DGST-10-80-Y12A

Verified stock: 0

Festo 8085169, Mini slide, configuration: DGST-10-80-Y12A

Festo

DGST-8-50-Y12A

Verified stock: 0

Festo Mini slide DGST-10-50-Y12A Stroke: 50 mm, Adjustable end-position range/front length: 15,1 mm, Adjustable end-position range/rear length: 15,3 mm, Piston diameter: 10 mm, Operating mode of drive unit: Yoke

Festo

DGST-16-150-Y12A

Verified stock: 0

Festo 8085182, Mini slide, configuration: DGST-16-150-Y12A

Festo

VTUG-18-MSD-B1H-25V20-Q10L-U-Q8S-3E3L+HM2

Verified stock: 0

Festo VTUG valve manifold - 573606 - configuration: VTUG-18-MSD-B1H-25V20-Q10L-U-Q8S-3E3L+HM2

Festo

What can I help you find today?

Recommended parts

LC1D95M7

Schneider Electric LC1D95M7 is a magnetic contactor from the Deca sub-range, featuring screw connections and three poles (3P; 3NO). It has a rated current of 125A (AC-1) and 95A (440Vac; AC-3), with a mounting mode designed for DIN rail installation. The net width of the contactor is 85 mm, and it offers a degree of protection rated at IP20. The control voltage (AC) ranges from 176-242Vac (220Vac nom.; 50Hz; 0.8...1.1 x Uc) to 187-242Vac (220Vac nom.; 60Hz; 0.85...1.1 x Uc), with a rated operating voltage (Ue) of 1000 V. It includes 1 normally open (NO) auxiliary contact and 1 normally closed (NC) auxiliary contact, both of the instantaneous type (1NO+1NC). The rated impulse voltage (Uimp) is 8 kV. This contactor is capable of handling rated active power ranging from 25kW (220-230Vac; AC-3) to 55kW (500Vac; AC-3), with specific ratings for various voltages up to 1000Vac. It also supports rated power (HP) for motors from 7.5HP (115Vac; single-phase) to 60HP (575-600Vac; 3-phase), under UL/CSA standards. The mechanical durability of the LC1D95M7 is rated at 4,000,000 operations, and its electrical durability (with load) is rated at 1,200,000 operations. The rated voltage (AC) for phase-to-phase connections is 1000 V.

Schneider Electric

M9F43303

Schneider Electric M9F43303 is a Miniature Circuit Breaker (MCB) within the C60BP sub-range, designed with a 3-pole configuration. It has a rated current of 3A and features a rated insulation voltage (Ui) of 500V. This MCB operates with a rated voltage of 60Vdc and has a rated impulse voltage (Uimp) of 6kV. It offers a short circuit breaking rating of 14kA AIR at both 120Vac and 240Vac, and 10kA AIR at 480Y/277Vac and 60Vdc. The rated voltage for AC applications is 240V phase-to-neutral and 415V phase-to-phase. All three poles are protected, and it is equipped with a D tripping curve.

Schneider Electric

S29371

Square D by Schneider Electric S29371 is a locking device designed for fixed OFF or ON locking. It functions as a padlocking device, ensuring secure locking capabilities. The dimensions of this part are a net width of 60 mm, a net height of 21 mm, and a net depth of 59 mm.

Schneider Electric

UBC10.241

PULS UBC10.241 is an Uninterruptible Power Supply (UPS) control module within the U-series, featuring a built-in battery with a 50% power reserve and a green status LED. This module is housed in aluminium and utilizes spring-clamp connections for installation. It measures W123mm x H124mm x D119mm and operates on a supply voltage range of 22.5Vdc to 30Vdc, with a nominal 24Vdc. The rated current is 10A at 22.5Vdc and can reach up to 15A in buffer mode for less than 5 seconds at full output voltage. It supports DIN rail mounting and can operate in ambient air temperatures ranging from 0 to +40°C. The current consumption is 1.1A at a 24Vdc input, and it is designed for DC networks. Visual position indicators include Ready, Buffering, Inhibit, and Replace Battery. Protection functions include output overvoltage protection with a typical 32Vdc and a maximum of 35Vdc, and overload/short-circuit protection with a minimum of 17.9A and a maximum of 21A at load impedance. It is advised not to use the DC-UPS in parallel to increase output power, but paralleling two units for 1+1 redundancy is possible for higher system reliability. The output voltage is regulated at 22.5Vdc in buffer mode with a 23Vdc turn-ON. The efficiency is rated at 0.978 with a 24Vdc input, and the rated power is 360W at 24Vdc and 240W/360W in buffer mode. Power dissipation/losses are 2.9W with a 24Vdc input at 0A output current and 5.5W at 10A output current. Ripple is maintained at 20mVpp across a frequency range of 20Hz to 20MHz at 50Ω. The electrical durability is rated at 137400 hours at 40°C with a 10A output and 24Vdc input, equivalent to 15 years or 131400 hours at both 40°C with a 5A output and 25°C with a 10A output.

Puls

EL6910

EtherCAT Terminal communication interface, TwinSAFE Logic

Beckhoff

KG5067

Capacitive sensor, Reliable level detection of conductive media, Electrical design: PNP/NPN; (Automatic load detection PNP/NPN), Output function: normally open / closed; (selectable), Sensing range [mm]: 8, Communication interface: IO-Link, Housing: Threa

ifm Electronic

224

SSM1A130BD

Schneider Electric SSM1A130BD is a solid state relay (SSR) within the SSM sub-range, designed to facilitate solid state/static relay functions. It operates with a control voltage (DC) range of 4-32 Vdc and can handle a rated current of 30 A. The relay is suitable for applications requiring a rated voltage (AC) from phase-to-neutral within the range of 24-280 V.

Schneider Electric