Powermatic Associates Logo

548129 Festo Servo Pneumatic Controllers

548129 on Powermatic Associates
Festo

Part#:548129

Manufacturer:Festo

Alt. Part#:SPC11-MTS-AIF-2

Product Lifecycle:Active

Get a quick Quote!

end-position controller SPC11-MTS-AIF-2 For DGCI linear drives. Data backup: Flash memory, Control signals: (* Input, remote/teach-in/left/right, * Input, position 1/2/3/4, * Output, error-ready, * Output, position 1/2/3/4), Display: (* 3-place, * Colour:

About the manufacturer: Festo is one of the manufacturers that offers Servo Pneumatic Controllers that you can order at Powermatic Associates site. Festo Corp. has been a top supplier of automation and intelligent automation solutions for more than four decades in the United States and eight decades globally. The company is committed to transforming the manufacturing sector and enhancing business efficiency.

Check out the 548129 Festo price in the box on the right side or send a quick quote.

Product Details

  • Control signals
    Remote/teach input/left/right Output, position 1/2/3/4
  • Outputs type
    as per IEC 61131-2 No galvanic isolation
  • Max. current consumption without proportional valve
    70 mA
  • Continuous shock resistance to DIN/IEC 68 Part 2-82
    Tested as per severity level 2
  • Degree of protection
    IP65 as per IEC 60529
  • Linear potentiometer electrical connection
    5-pin Round design
  • Control elements
    3 pushbuttons Touch sensitive keyboard
  • Number of digital outputs
    5
  • Current rating per output
    100 mA
  • Relative air humidity
    0 - 95 % Non-condensing
  • Ambient temperature
    0 °C ... 50 °C
  • Fuse protection for outputs
    Electronic Via sum of all outputs
  • Design of inputs
    as per IEC 61131-2 No galvanic isolation
  • Debounce time at inputs
    20 ms
  • Nominal operating voltage DC
    24 V
  • Permissible voltage fluctuations
    +/- 25 %
  • Certification
    RCM compliance mark
  • Electrical connection, proportional valve
    Plug 7-pin
  • Type code
    SPC11
  • Data backup
    Flash memory
  • Max. current consumption with proportional valve
    1.1 A
  • CE marking (see declaration of conformity)
    As per EU EMC directive
  • Vibration resistance to DIN/IEC 68 Part 2-6
    Tested as per severity level 1
  • Elec. connection of operating voltage, inputs and outputs
    15-pin Plug
  • Display
    3-digit Seven-segment display
  • Number of digital inputs
    8
  • Input current consumption
    4 mA
  • Product weight
    400 g
  • Cable length
    30 m

Product condition

New Factory Sealed

New Factory Sealed - New condition, never used, original OEM part with original packaging and factory seal.

Related documents 548129 Specs

548129 548129 DataSheet.pdf

Manufacturer warranty

Get a quick Quote!

Request a quote, and we will send you price and availability within minutes.

Select Qty:

Average response time: 11 minutes

Worldwide Shipping and Delivery

Secure Payment Processing

Warranty

Responsive Customer Support

Got Questions? We've Got Answers!

Need more details?

Feel free to chat with us

Relevant products

ESV752N04TXB on Powermatic Associates

ESV752N04TXB

Verified stock: 9

Lenze ESV752N04TXB is a Variable Speed/Frequency Drive (VSD/VFD) / Inverter designed for control cabinet or surface/wall mounting. It operates within an ambient air temperature range of -10 to +55 °C, with a derating of 2.5% per °C above +40°C. This model features 1 analog output (0-10Vdc) at Terminal 5, and its degree of protection is NEMA 1 IP31. The dimensions are H250mm x W130mm x D160mm. It includes 1 digital output (NPN; 24Vdc / 50mA) at Terminal 14, and its analog inputs consist of 1 x analog input (0-10Vdc) at terminal 5 and 1 x analog input (4-20mA) at terminal 25. Digital inputs include 1 x digital input (PNP/NPN logic) at terminal 1 for START/STOP and 4 additional digital inputs at terminals 13A, 13B, 13C, and 13D. Protection functions cover earth fault, phase loss, overvoltage, under voltage, motor stalling, over temperature, motor overload (125% of FLA), and short circuit (SCCR = 200kA at rated voltage). Designed for indoor use only with a frame size H1, it supports a supply voltage of 400Vac / 480Vac and a network frequency of 48-62 Hz (input) and 0-500 Hz (output). This model does not include a communication interface, has a rated current of 16.1A (400Vac) and 14A (480Vac), and is suitable for a 3-phase (3P / 3AC) network. The rated active power is 7.5kW (400-480Vac), and the rated power is 10HP (400-480Vac).

Lenze

ESV371N01SXB on Powermatic Associates

ESV371N01SXB

Verified stock: 6

Lenze ESV371N01SXB is a Variable Speed/Frequency Drive (VSD/VFD) / Inverter designed for control cabinet or surface/wall mounting. It operates within an ambient air temperature range of -10 to +55 °C, with a derating of 2.5% per °C above +40 °C. This model features 1 x analog output (0-10Vdc) at Terminal 5, and its degree of protection is NEMA 1 IP31. The dimensions are H190mm x W99mm x D111mm. It includes 1 x digital output (NPN; 24Vdc / 50mA) at Terminal 14, 1 x analog input (0-10Vdc) at terminal 5, 1 x analog input (4-20mA) at terminal 25, and multiple digital inputs (PNP/NPN logic) at terminals 1 START/STOP, 13A, 13B, 13C, and 13D. Protection functions cover earth fault, phase loss, overvoltage, under voltage, motor stalling, over temperature, motor overload (125% of FLA), and short circuit (SCCR = 200kA at rated voltage). Designed for indoor use only with a frame size G1, it supports a supply voltage of 120Vac / 240Vac and a network frequency of 48-62 Hz (input) and 0-500 Hz (output). This model does not include a communication interface, has a rated current of 2.4A for both 120Vac and 240Vac, operates on a single-phase / 1P network, and offers a rated active power of 0.37kW and rated power of 1/2HP for the same voltage range.

Lenze

What can I help you find today?

Recommended parts

RXM4AB2BD on Powermatic Associates

RXM4AB2BD

Schneider Electric RXM4AB2BD is a miniature plug-in relay within the RXM sub-range, featuring contacts made from an Ag/Ni - Silver - Nickel alloy. This relay is designed with 4C/O - 4PDT (4 Pole Double Throw) contact type, and operates with a control voltage of 24 Vdc. It is rated for a current of 6 A at both 250Vac (AC-1) and 28Vac (DC-1). The RXM4AB2BD offers plug-in mounting mode and can operate within an ambient air temperature range of -40 to +55 °C. It has an IP40 degree of protection and a current consumption of 0.038 A. This model includes a visual position indicator through an LED, consumes 0.9 W of power, and boasts an electrical durability of 100,000 operations with a resistive load, alongside a mechanical durability of 10,000,000 operations at no load. Additionally, it features a Lockable Test Button (LTB) for latching.

Schneider Electric

53