546174 Festo Process & Media Valves

Name: 546174
Brand: Festo

Part#:546174

Manufacturer:Festo

Category:Process & Media Valves

Alt. Part#:VZWM-L-M22C-N1-F5-R1

Product Lifecycle:Active

Get a quick Quote!

solenoid valve VZWM-L-M22C-N1-F5-R1 Servo-controlled, with diaphragm, NPT1" connection, stainless steel version. Design structure: (* Diaphragm valve, * Servo controlled), Type of actuation: electrical, Sealing principle: soft, Assembly position: Preferab

About the manufacturer: Festo is one of the manufacturers that offers Process & Media Valves that you can order at Powermatic Associates site. Festo Corp. has been a top supplier of automation and intelligent automation solutions for more than four decades in the United States and eight decades globally. The company is committed to transforming the manufacturing sector and enhancing business efficiency.

Check out the 546174 Festo price in the box on the right side or send a quick quote.

Product Details

Type code
VZWM
Fitting connection
1 NPT
Valve function
2/2, closed, monostable
Temperature of medium
-10 °C ... 60 °C
Response time "on" for liquid media
300 ms
Housing material
Cast stainless steel
Max. tightening torque for connecting thread
350 Nm
Sealing principle
Soft
Type of mounting
Line installation
Symbol
00995681
Temperature of liquid media
5 °C ... 50 °C
Ambient temperature
-10 °C ... 60 °C
C value
41 l/sbar
CE marking (see declaration of conformity)
as per EU pressure equipment directive
Armature tube material
High-alloy steel
Max. tightening torque for coil fastening
2 Nm
Design
Diaphragm valve servo-controlled
Nominal width
25 mm
Differential pressure
0.5 bar
Type of control
Pilot-controlled

On switching time

15 ms

Response time "off" for liquid media

950 ms

b-value

0.57

Seals material

NBR

Corrosion resistance class (CRC)

3 - High corrosion stress

Mounting position

Preferably upright

Flow direction

Non-reversible

Medium pressure of liquid media

0.5 bar ... 6 bar

Medium pressure of gaseous media

0.5 bar ... 10 bar

Switching time off

12 ms

Note on materials

Contains paint-wetting impairment substances RoHS-compliant

Product weight

1100 g

Actuation type

Electrical

Electrical connection

Solenoid coil type MH-... , coil can be ordered as an accessory

Medium

Compressed air as per ISO 8573-1:2010 [7:4:4] Neutral liquids

Max. viscosity

22 mm²/s

Flow rate Kv

10.7 m³/h

Standard nominal flow rate

11700 l/min

Material number of housing

1.4581

Max. torque for cover screw

30 Nm

Product condition

New Factory Sealed

New Factory Sealed - New condition, never used, original OEM part with original packaging and factory seal.

Recommended parts

UBC10.241

PULS UBC10.241 is an Uninterruptible Power Supply (UPS) control module within the U-series, featuring a built-in battery with a 50% power reserve and a green status LED. This module is housed in aluminium and utilizes spring-clamp connections for installation. It measures W123mm x H124mm x D119mm and operates on a supply voltage range of 22.5Vdc to 30Vdc, with a nominal 24Vdc. The rated current is 10A at 22.5Vdc and can reach up to 15A in buffer mode for less than 5 seconds at full output voltage. It supports DIN rail mounting and can operate in ambient air temperatures ranging from 0 to +40°C. The current consumption is 1.1A at a 24Vdc input, and it is designed for DC networks. Visual position indicators include Ready, Buffering, Inhibit, and Replace Battery. Protection functions include output overvoltage protection with a typical 32Vdc and a maximum of 35Vdc, and overload/short-circuit protection with a minimum of 17.9A and a maximum of 21A at load impedance. It is advised not to use the DC-UPS in parallel to increase output power, but paralleling two units for 1+1 redundancy is possible for higher system reliability. The output voltage is regulated at 22.5Vdc in buffer mode with a 23Vdc turn-ON. The efficiency is rated at 0.978 with a 24Vdc input, and the rated power is 360W at 24Vdc and 240W/360W in buffer mode. Power dissipation/losses are 2.9W with a 24Vdc input at 0A output current and 5.5W at 10A output current. Ripple is maintained at 20mVpp across a frequency range of 20Hz to 20MHz at 50Ω. The electrical durability is rated at 137400 hours at 40°C with a 10A output and 24Vdc input, equivalent to 15 years or 131400 hours at both 40°C with a 5A output and 25°C with a 10A output.

Puls

RSC RKC 572-8.2M/TR2

RSC RKC 572-8.2M/TR2 Turck - RSC RKC 572-8.2M/TR2 DeviceNet™ Cordset, Extension Cordset

Turck

CS5.241

PULS CS5.241 AC/DC Power Supply, 5A, 120W, 24DC output, 100-120 VAC input

Puls

DKF 28-27-1

DKF 28-27-1 Turck - DKF 28-27-1 Actuator and Sensor Receptacle, Front Mount

Turck

222

G10S0000

Red Lion G10S0000 is an HMI / Display unit from the HMI Rugged Graphite series designed for both indoor and outdoor use. It features an HMI operator touchscreen panel with a connection interface that includes 1 x RJ45 port for Ethernet, 2 x RJ11 ports for RS-232, and 1 x RJ45 port supporting both RS-422 and RS-485 communication protocols. The unit operates on a supply voltage range of 10-30Vdc, accommodating both 12Vdc and 24Vdc systems. It is engineered to function within an ambient air temperature range of -20 to +60 °C and offers a degree of protection rated at IP66 and NEMA 4X. The G10S0000 is equipped with 7 module slots for connection capacity, and its power consumption is typically 18 W, with a maximum of 53 W. The electrical durability of the backlight is rated at 35,000 hours. For storage, it includes an SD card slot, and it boasts a brightness level of 2500cd/m2.

Red Lion

S29371

Square D by Schneider Electric S29371 is a locking device designed for fixed OFF or ON locking. It functions as a padlocking device, ensuring secure locking capabilities. The dimensions of this part are a net width of 60 mm, a net height of 21 mm, and a net depth of 59 mm.

Schneider Electric