538281 Festo Proximity Sensors

Name: 538281
Brand: Festo

Part#:538281

Manufacturer:Festo

Alt. Part#:SIED-M18B-ZO-S-L

Product Lifecycle:Active

Get a quick Quote!

proximity sensor SIED-M18B-ZO-S-L With plug, flush mounting Design: Round, Conforms to standard: EN 60947-5-2, Authorisation: (* RCM Mark, * c UL us - Listed (OL)), CE mark (see declaration of conformity): (* to EU directive for EMC, * to EU directive low

About the manufacturer: Festo is one of the manufacturers that offers Proximity Sensors that you can order at Powermatic Associates site. Festo Corp. has been a top supplier of automation and intelligent automation solutions for more than four decades in the United States and eight decades globally. The company is committed to transforming the manufacturing sector and enhancing business efficiency.

Check out the 538281 Festo price in the box on the right side or send a quick quote.

Product Details

Conforms to standard
EN 60947-5-2
Symbol
00992846
Assured operating distance
4.05 mm
Repetition accuracy
0.15 mm
Minimum load current
5 mA
Mains frequency
50 Hz
Size
M18
Product weight
50 g
Selection of additional sensor information
For direct and alternating voltage
Corrosion resistance class (CRC)
1 - Low corrosion stress
Certification
RCM compliance mark c UL us - Listed (OL)
Ambient temperature
-25 °C ... 85 °C
Hysteresis
0.04 mm ... 1.15 mm
Voltage drop
≤ 8 V
Idle current
≤ 1.5 mA
Tightening torque
30 Nm
Degree of protection
IP67
Design
Round
Note on materials
Free of copper and PTFE
Measuring principle
Inductive

Max. switching frequency DC

490 Hz

Short-circuit protection

Electrical connection

2-pin Plug

Housing material

Brass Nickel-plated

Electrical output

Non-contact, 2-wire

Type code

SIED

Reduction factors

Aluminum = 0.4 Steel St 37 = 1.0

Switching element function

N/C contact

Max. output current

300 mA

DC operating voltage range

20 V ... 320 V

Type of mounting

With lock nut

Switching status indication

LED yellow

CE marking (see declaration of conformity)

As per EU EMC directive As per EU low voltage directive

Rated operating distance

5 mm

Switching output

Non-contact, 2-wire

Max. switching frequency AC

25 Hz

Operating voltage range AC

20 V ... 265 V

Reverse polarity protection

for all electrical connections

Mounting type

Flush

Selection of sensor version

Standard

Product condition

New Factory Sealed

New Factory Sealed - New condition, never used, original OEM part with original packaging and factory seal.

Recommended parts

M9F43303

Schneider Electric M9F43303 is a Miniature Circuit Breaker (MCB) within the C60BP sub-range, designed with a 3-pole configuration. It has a rated current of 3A and features a rated insulation voltage (Ui) of 500V. This MCB operates with a rated voltage of 60Vdc and has a rated impulse voltage (Uimp) of 6kV. It offers a short circuit breaking rating of 14kA AIR at both 120Vac and 240Vac, and 10kA AIR at 480Y/277Vac and 60Vdc. The rated voltage for AC applications is 240V phase-to-neutral and 415V phase-to-phase. All three poles are protected, and it is equipped with a D tripping curve.

Schneider Electric

EL6910

EtherCAT Terminal communication interface, TwinSAFE Logic

Beckhoff

KG5067

Capacitive sensor, Reliable level detection of conductive media, Electrical design: PNP/NPN; (Automatic load detection PNP/NPN), Output function: normally open / closed; (selectable), Sensing range [mm]: 8, Communication interface: IO-Link, Housing: Threa

ifm Electronic

224

SSM1A130BD

Schneider Electric SSM1A130BD is a solid state relay (SSR) within the SSM sub-range, designed to facilitate solid state/static relay functions. It operates with a control voltage (DC) range of 4-32 Vdc and can handle a rated current of 30 A. The relay is suitable for applications requiring a rated voltage (AC) from phase-to-neutral within the range of 24-280 V.

Schneider Electric

LC1D95M7

Schneider Electric LC1D95M7 is a magnetic contactor from the Deca sub-range, featuring screw connections and three poles (3P; 3NO). It has a rated current of 125A (AC-1) and 95A (440Vac; AC-3), with a mounting mode designed for DIN rail installation. The net width of the contactor is 85 mm, and it offers a degree of protection rated at IP20. The control voltage (AC) ranges from 176-242Vac (220Vac nom.; 50Hz; 0.8...1.1 x Uc) to 187-242Vac (220Vac nom.; 60Hz; 0.85...1.1 x Uc), with a rated operating voltage (Ue) of 1000 V. It includes 1 normally open (NO) auxiliary contact and 1 normally closed (NC) auxiliary contact, both of the instantaneous type (1NO+1NC). The rated impulse voltage (Uimp) is 8 kV. This contactor is capable of handling rated active power ranging from 25kW (220-230Vac; AC-3) to 55kW (500Vac; AC-3), with specific ratings for various voltages up to 1000Vac. It also supports rated power (HP) for motors from 7.5HP (115Vac; single-phase) to 60HP (575-600Vac; 3-phase), under UL/CSA standards. The mechanical durability of the LC1D95M7 is rated at 4,000,000 operations, and its electrical durability (with load) is rated at 1,200,000 operations. The rated voltage (AC) for phase-to-phase connections is 1000 V.

Schneider Electric