533418 Festo Quarter Turn Actuators

Name: 533418
Brand: Festo

Part#:533418

Manufacturer:Festo

Alt. Part#:DAPS-0030-090-R-F0305

Product Lifecycle:Active

Get a quick Quote!

semi-rotary drive DAPS-0030-090-R-F0305 Double-acting, air connection as per VDI/VDE 3845, Namur valves can be directly flange-mounted Size of actuator: 0030, Flange hole pattern: (* F03, * F05), Swivel angle: 90 deg, End-position adjustment range at 0°:

About the manufacturer: Festo is one of the manufacturers that offers Quarter Turn Actuators that you can order at Powermatic Associates site. Festo Corp. has been a top supplier of automation and intelligent automation solutions for more than four decades in the United States and eight decades globally. The company is committed to transforming the manufacturing sector and enhancing business efficiency.

Check out the 533418 Festo price in the box on the right side or send a quick quote.

Product Details

Cushioning
No cushioning
Position sensing
None
Operating pressure
1 bar ... 8.4 bar
Type of (ignition) protection for dust
Ex h IIIC T85°C...T200°C Db X
Torque at nominal operating pressure and 0° swivel angle
30 Nm
Air consumption at 6 bar per cycle 0°-nominal swivel angle-0°
1.05 l
Cover material
Wrought aluminum alloy
Flange hole pattern
F03 F05
Type code
DAPS
Closing direction
Clockwise closing
ATEX category gas
II 2G
Explosion prevention and protection
Zone 1 (ATEX) Zone 22 (ATEX)
Explosive ambient temperature
-20°C <= Ta <= +60°C
Information on operating and pilot media
Operation with oil lubrication possible (required for further use)
Shaft connection
T11
Housing material
Wrought aluminum alloy
End-position adjusting range at 0°
-1 deg ... 9 deg
Mode of operation
Double-acting
Safety integrity level (SIL)
Up to SIL 2 high demand mode Up to SIL 2 low demand mode
ATEX category for dust
II 2D

Operating medium

Compressed air as per ISO 8573-1:2010 [7:4:4]

Note about the torque

The actuator's operating torque must not be higher than the maximum permissible torque listed in ISO 5211, based on the size of the mounting flange and the coupling.

Pneumatic connection

G1/8

Seals material

FPM PUR

Swivel angle

90 deg

Standard connection for valve

ISO 5211

Design

Scotch yoke system

Symbol

00991265

Type of ignition protection for gas

Ex h IIC T6...T3 Gb X

CE marking (see declaration of conformity)

as per EU explosion protection directive (ATEX)

Torque at nominal operating pressure and 90° swivel angle

22.5 Nm

Product weight

1000 g

Shaft material

High-alloy steel

Size of valve actuator

0030

Depth shaft connection

13.2 mm

Mounting position

Any

Valve connection conforms to standard

VDI/VDE 3845 (NAMUR)

Nominal operating pressure

5.6 bar

Ambient temperature

-20 °C ... 80 °C

Corrosion resistance class (CRC)

3 - High corrosion stress

Torque at nominal operating pressure and 50° swivel angle

15 Nm

Note on materials

RoHS-compliant

Material of screws

High-alloy steel

Material number for shaft

1.4305

Product condition

New Factory Sealed

New Factory Sealed - New condition, never used, original OEM part with original packaging and factory seal.

Recommended parts

M9F43303

Schneider Electric M9F43303 is a Miniature Circuit Breaker (MCB) within the C60BP sub-range, designed with a 3-pole configuration. It has a rated current of 3A and features a rated insulation voltage (Ui) of 500V. This MCB operates with a rated voltage of 60Vdc and has a rated impulse voltage (Uimp) of 6kV. It offers a short circuit breaking rating of 14kA AIR at both 120Vac and 240Vac, and 10kA AIR at 480Y/277Vac and 60Vdc. The rated voltage for AC applications is 240V phase-to-neutral and 415V phase-to-phase. All three poles are protected, and it is equipped with a D tripping curve.

Schneider Electric

EL6910

EtherCAT Terminal communication interface, TwinSAFE Logic

Beckhoff

KG5067

Capacitive sensor, Reliable level detection of conductive media, Electrical design: PNP/NPN; (Automatic load detection PNP/NPN), Output function: normally open / closed; (selectable), Sensing range [mm]: 8, Communication interface: IO-Link, Housing: Threa

ifm Electronic

224

SSM1A130BD

Schneider Electric SSM1A130BD is a solid state relay (SSR) within the SSM sub-range, designed to facilitate solid state/static relay functions. It operates with a control voltage (DC) range of 4-32 Vdc and can handle a rated current of 30 A. The relay is suitable for applications requiring a rated voltage (AC) from phase-to-neutral within the range of 24-280 V.

Schneider Electric

LC1D95M7

Schneider Electric LC1D95M7 is a magnetic contactor from the Deca sub-range, featuring screw connections and three poles (3P; 3NO). It has a rated current of 125A (AC-1) and 95A (440Vac; AC-3), with a mounting mode designed for DIN rail installation. The net width of the contactor is 85 mm, and it offers a degree of protection rated at IP20. The control voltage (AC) ranges from 176-242Vac (220Vac nom.; 50Hz; 0.8...1.1 x Uc) to 187-242Vac (220Vac nom.; 60Hz; 0.85...1.1 x Uc), with a rated operating voltage (Ue) of 1000 V. It includes 1 normally open (NO) auxiliary contact and 1 normally closed (NC) auxiliary contact, both of the instantaneous type (1NO+1NC). The rated impulse voltage (Uimp) is 8 kV. This contactor is capable of handling rated active power ranging from 25kW (220-230Vac; AC-3) to 55kW (500Vac; AC-3), with specific ratings for various voltages up to 1000Vac. It also supports rated power (HP) for motors from 7.5HP (115Vac; single-phase) to 60HP (575-600Vac; 3-phase), under UL/CSA standards. The mechanical durability of the LC1D95M7 is rated at 4,000,000 operations, and its electrical durability (with load) is rated at 1,200,000 operations. The rated voltage (AC) for phase-to-phase connections is 1000 V.

Schneider Electric