5255428 Festo Servo Motors

Product Details

• Electrical connection 1, connection type
  Hybrid plug
• Rotor position sensor for manufacturer designation
  EQI 1131
• Note on degree of protection
  IP40 for motor shaft without rotary shaft seal IP67 for motor housing, incl. connection technology
• Measuring flange
  250 x 250 x 15 mm, steel
• Certificate issuing authority
  UL E342973
• Rotor position encoder for DC operating voltage
  5 V
• Brake current consumption
  0.5 A
• Detent torque
  < 1.0% of peak torque
• Mounting position
  Any
• Contamination level
  2
• Balancing quality
  G 2.5
• Electrical connection 1, number of pins/wires
  15
• Max. installation height
  4000 m
• Number of pole pairs
  5
• Brake closing time
  ≤ 15 ms
• DC brake response delay
  ≤ 3 ms
• Standstill torque constant
  0.57 Nm/A
• Thermal time constant
  42 min
• Rotor position sensor
  Absolute encoder, multi-turn
• Brake DC operating voltage
  24 V
Brake power consumption
12 W
Motor nominal current
2.7 A
CE marking (see declaration of conformity)
As per EU EMC directive As per EU RoHS directive
Electrical connection 1, connection technology
M23x1
Information on max. installation height
with 1,000 m and longer only with derating of -1.0% per 100 m
Motor type as per EN 60034-7
IM B5 IM V3
Brake airflow
0.37 A
Brake stopping current
0.37 A
Cross inductivity Lq (phase)
12.2 mH
Brake separation time
≤ 55 ms
Rotor position encoder for positional values per revolution
524288
Rotor position sensor measuring principle
Inductive
Max. rotational speed
6700 1/min
Nominal operating voltage DC
325 V
Phase-phase winding resistance
4.93 Ohm
Corrosion resistance class (CRC)
0 - No corrosion stress
Ambient temperature
-15 °C ... 40 °C
Brake mass moment of inertia
0.249 kgcm²
MTTF, subcomponent
190 years, rotor position sensor
Note on materials
Contains paint-wetting impairment substances RoHS-compliant
Electrical connection for input 1, connection pattern
00995913
Concentricity, coaxiality, axial runout according to DIN SPEC 42955
N
Note on ambient temperature
Up to 80 °C with derating of -1.5% per degree Celsius
Max. brake no-load speed
10000 1/min
Brake coil resistance
48 Ohm
Storage lifetime, under nominal conditions
20000 h
Rotor position encoder for DC operating voltage range
3.6 V ... 14 V
Type code
EMMT-AS
Nominal rotary speed
3000 1/min
Type of winding switch
Star inside
Peak current
8.4 A
Brake holding torque
4.5 Nm
MTTFd, subcomponent
380 years, rotor position sensor
Interface code, motor out
80P
Shock resistance
Shock test with severity level 2 as per FN 942017-5 and EN 60068-2-27
Vibration resistance
Transport application test with severity level 2 as per FN 942017-4 and EN 60068-2-6
Max. winding temperature
155 °C
Brake coil inductivity
1000 mH
Max. mechanical speed
14000 1/min
Max. brake friction work
8200 J
Electric time constant
4.9 ms
Rotor position encoder for absolutely detectable revolutions
4096
Thermal resistance
0.95 K/W
Rotor position sensor interface
EnDat® 22
Continuous stall current
3.1 A
Motor constants
0.48 Nm/A
Winding inductance phase-phase
16.3 mH
Voltage constant, phase-to-phase
34.3 mVmin
Degree of protection
IP40
Thermal class according to EN 60034-1
F
Permissible axial shaft load
120 N
Conforms to standard
IEC 60034
Winding longitudinal inductivity Ld (phase)
10.2 mH
Rotor position encoder system accuracy angle measurement
-120 arcsec ... 120 arcsec
Temperature monitoring
Digital motor temperature transmission via EnDat® 2.2
Motor nominal power
408 W
Rotor position sensor resolution
19 bit
Rating class according to EN 60034-1
S1
Storage temperature
-20 °C ... 70 °C
Certification
RCM compliance mark c UL us - Recognized (OL)
Nominal torque
1.3 Nm
Permissible radial shaft load
620 N
Switching cycles, holding brake
10 million idle actuations (without friction work!)
Relative air humidity
0 - 90 %
Total output inertia moment
1.64 kgcm²
Peak torque
2.8 Nm
Stall torque
1.46 Nm
Product weight
2720 g

Related documents 5255428 Specs