5255427 Festo Servo Motors

Name: 5255427
Brand: Festo

Part#:5255427

Manufacturer:Festo

Alt. Part#:EMMT-AS-80-S-LS-RSB

Product Lifecycle:Active

Get a quick Quote!

servo motor EMMT-AS-80-S-LS-RSB Ambient temperature: -15 - 40 °C, Note on ambient temperature: up to 80°C with derating -1.5%/°C, Max. installation height: 4000 m, Note on max. installation height: As of 1,000 m, only with derating of -1.0% per 100 m, Sto

About the manufacturer: Festo is one of the manufacturers that offers Servo Motors that you can order at Powermatic Associates site. Festo Corp. has been a top supplier of automation and intelligent automation solutions for more than four decades in the United States and eight decades globally. The company is committed to transforming the manufacturing sector and enhancing business efficiency.

Check out the 5255427 Festo price in the box on the right side or send a quick quote.

Product Details

Detent torque
< 1.0% of peak torque
Rotor position sensor for manufacturer designation
ECI 1118
Electrical connection 1, connection type
Hybrid plug
Information on max. installation height
with 1,000 m and longer only with derating of -1.0% per 100 m
Measuring flange
250 x 250 x 15 mm, steel
Max. brake no-load speed
10000 1/min
Brake stopping current
0.37 A
DC brake response delay
≤ 3 ms
Rotor position encoder system accuracy angle measurement
-120 arcsec ... 120 arcsec
Max. rotational speed
6700 1/min
Nominal rotary speed
3000 1/min
Nominal operating voltage DC
325 V
Thermal time constant
42 min
Electrical connection 1, connection technology
M23x1
Concentricity, coaxiality, axial runout according to DIN SPEC 42955
N
Vibration resistance
Transport application test with severity level 2 as per FN 942017-4 and EN 60068-2-6
Brake airflow
0.37 A
Rotor position encoder for DC operating voltage
5 V
Brake coil resistance
48 Ohm
Brake separation time
≤ 55 ms

Winding longitudinal inductivity Ld (phase)

10.2 mH

Cross inductivity Lq (phase)

12.2 mH

Thermal resistance

0.95 K/W

Type code

EMMT-AS

Continuous stall current

3.1 A

Motor nominal current

2.7 A

Voltage constant, phase-to-phase

34.3 mVmin

Relative air humidity

0 - 90 %

Electrical connection for input 1, connection pattern

00995913

Note on ambient temperature

Up to 80 °C with derating of -1.5% per degree Celsius

Balancing quality

G 2.5

Brake current consumption

0.5 A

Brake closing time

≤ 15 ms

Standstill torque constant

0.57 Nm/A

Rotor position sensor measuring principle

Inductive

Brake power consumption

12 W

Motor nominal power

408 W

Rotor position sensor resolution

18 bit

Type of winding switch

Star inside

Storage temperature

-20 °C ... 70 °C

Total output inertia moment

1.64 kgcm²

Nominal torque

1.3 Nm

MTTF, subcomponent

190 years, rotor position sensor

Product weight

2720 g

Note on materials

Contains paint-wetting impairment substances RoHS-compliant

Mounting position

Any

Note on degree of protection

IP40 for motor shaft without rotary shaft seal IP67 for motor housing, incl. connection technology

Electrical connection 1, number of pins/wires

Certificate issuing authority

UL E342973

Max. mechanical speed

14000 1/min

Storage lifetime, under nominal conditions

20000 h

Electric time constant

4.9 ms

Rotor position encoder for absolutely detectable revolutions

Rotor position sensor

Absolute encoder, single-turn

Rotor position sensor interface

EnDat® 22

Brake DC operating voltage

24 V

Phase-phase winding resistance

4.93 Ohm

Rating class according to EN 60034-1

Thermal class according to EN 60034-1

Brake mass moment of inertia

0.249 kgcm²

Switching cycles, holding brake

10 million idle actuations (without friction work!)

Shock resistance

Shock test with severity level 2 as per FN 942017-5 and EN 60068-2-27

Contamination level

Motor type as per EN 60034-7

IM B5 IM V3

Max. winding temperature

155 °C

Max. installation height

4000 m

Brake coil inductivity

1000 mH

Number of pole pairs

Max. brake friction work

8200 J

Rotor position encoder for DC operating voltage range

3.6 V ... 14 V

Rotor position encoder for positional values per revolution

262144

Temperature monitoring

Digital motor temperature transmission via EnDat® 2.2

Motor constants

0.48 Nm/A

Winding inductance phase-phase

16.3 mH

Corrosion resistance class (CRC)

0 - No corrosion stress

Degree of protection

IP40

Certification

RCM compliance mark c UL us - Recognized (OL)

Peak torque

2.8 Nm

Permissible axial shaft load

120 N

Interface code, motor out

80P

Peak current

8.4 A

CE marking (see declaration of conformity)

As per EU EMC directive As per EU RoHS directive

Ambient temperature

-15 °C ... 40 °C

Brake holding torque

4.5 Nm

Stall torque

1.46 Nm

MTTFd, subcomponent

380 years, rotor position sensor

Permissible radial shaft load

620 N

Conforms to standard

IEC 60034

Product condition

New Factory Sealed

New Factory Sealed - New condition, never used, original OEM part with original packaging and factory seal.

Recommended parts

UBC10.241

PULS UBC10.241 is an Uninterruptible Power Supply (UPS) control module within the U-series, featuring a built-in battery with a 50% power reserve and a green status LED. This module is housed in aluminium and utilizes spring-clamp connections for installation. It measures W123mm x H124mm x D119mm and operates on a supply voltage range of 22.5Vdc to 30Vdc, with a nominal 24Vdc. The rated current is 10A at 22.5Vdc and can reach up to 15A in buffer mode for less than 5 seconds at full output voltage. It supports DIN rail mounting and can operate in ambient air temperatures ranging from 0 to +40°C. The current consumption is 1.1A at a 24Vdc input, and it is designed for DC networks. Visual position indicators include Ready, Buffering, Inhibit, and Replace Battery. Protection functions include output overvoltage protection with a typical 32Vdc and a maximum of 35Vdc, and overload/short-circuit protection with a minimum of 17.9A and a maximum of 21A at load impedance. It is advised not to use the DC-UPS in parallel to increase output power, but paralleling two units for 1+1 redundancy is possible for higher system reliability. The output voltage is regulated at 22.5Vdc in buffer mode with a 23Vdc turn-ON. The efficiency is rated at 0.978 with a 24Vdc input, and the rated power is 360W at 24Vdc and 240W/360W in buffer mode. Power dissipation/losses are 2.9W with a 24Vdc input at 0A output current and 5.5W at 10A output current. Ripple is maintained at 20mVpp across a frequency range of 20Hz to 20MHz at 50Ω. The electrical durability is rated at 137400 hours at 40°C with a 10A output and 24Vdc input, equivalent to 15 years or 131400 hours at both 40°C with a 5A output and 25°C with a 10A output.

Puls

MG17416

Schneider Electric MG17416 is a Miniature Circuit Breaker (MCB) designed as a supplementary protector within the C60 UL1077 sub-range. It features a rated current of 15A and operates on a single pole (1 Pole(s)) configuration. The rated operating voltage (Ue) for this MCB is 277 V. It offers a short circuit breaking rating of 10kA AIR at 240Vac, 5kA AIR at 277Vac, and 10kA AIR at 65Vdc, with protection extended to 1 Pole(s). The tripping curve for this device is classified as type C.

Schneider Electric

CS5.241

PULS CS5.241 AC/DC Power Supply, 5A, 120W, 24DC output, 100-120 VAC input

Puls

DKF 28-27-1

Turck - DKF 28-27-1

Turck

222

G10S0000

Red Lion G10S0000 is an HMI / Display unit from the HMI Rugged Graphite series designed for both indoor and outdoor use. It features an HMI operator touchscreen panel with a connection interface that includes 1 x RJ45 port for Ethernet, 2 x RJ11 ports for RS-232, and 1 x RJ45 port supporting both RS-422 and RS-485 communication protocols. The unit operates on a supply voltage range of 10-30Vdc, accommodating both 12Vdc and 24Vdc systems. It is engineered to function within an ambient air temperature range of -20 to +60 °C and offers a degree of protection rated at IP66 and NEMA 4X. The G10S0000 is equipped with 7 module slots for connection capacity, and its power consumption is typically 18 W, with a maximum of 53 W. The electrical durability of the backlight is rated at 35,000 hours. For storage, it includes an SD card slot, and it boasts a brightness level of 2500cd/m2.

Red Lion

S29371

Square D by Schneider Electric S29371 is a locking device designed for fixed OFF or ON locking. It functions as a padlocking device, ensuring secure locking capabilities. The dimensions of this part are a net width of 60 mm, a net height of 21 mm, and a net depth of 59 mm.

Schneider Electric