4267595 Festo Servo Motors

Name: 4267595
Brand: Festo

Part#:4267595

Manufacturer:Festo

Alt. Part#:EMME-AS-80-MK-HS-AMXB

Product Lifecycle:Active

Get a quick Quote!

servo motor EMME-AS-80-MK-HS-AMXB Without gear unit/with brake. Ambient temperature: -10 - 40 °C, Storage temperature: -20 - 70 °C, Relative air humidity: 0 - 90 %, Conforms to standard: IEC 60034, Insulation protection class: F

About the manufacturer: Festo is one of the manufacturers that offers Servo Motors that you can order at Powermatic Associates site. Festo Corp. has been a top supplier of automation and intelligent automation solutions for more than four decades in the United States and eight decades globally. The company is committed to transforming the manufacturing sector and enhancing business efficiency.

Check out the 4267595 Festo price in the box on the right side or send a quick quote.

Product Details

Number of pole pairs
3
PFHd, subcomponent
1.3 x 10E-8, rotor position sensor
Insulation protection class
F
Motor nominal power
1000 W
Phase-phase winding resistance
9 Ohm
Rating class according to EN 60034-1
S1
Degree of protection
IP21
Brake holding torque
4.5 Nm
Peak torque
14 Nm
MTTFd, subcomponent
874 years, rotor position sensor
Conforms to standard
IEC 60034
Rotor position sensor measuring principle
Optical
Max. rotational speed
4097 1/min
Nominal rotary speed
3000 1/min
Nominal operating voltage DC
565 V
DC nominal voltage
565 V
Rotor position encoder, typical angular accuracy
20 arcmin
Voltage constant, phase-to-phase
97.5 mVmin
Ambient temperature
-10 °C ... 40 °C
Permissible axial shaft load
72 N

Product weight

4350 g

Featherkey shaft design

DIN 6885 A 6 x 6 x 22

Rotor position sensor interface

HIPERFACE®

Performance Level (PL), subcomponent

Category 3, performance level d, rotor position encoder

Continuous stall current

2.2 A

Motor constants

1.524 Nm/A

Type of winding switch

Star inside

Peak current

8.8 A

Relative air humidity

0 - 90 %

Nominal torque

3.2 Nm

Permissible radial shaft load

360 N

Electrical connection technology

Plug

Rotor position sensor

Safety encoder, absolute multi-turn

Duration of use Tm, subcomponent

20 years, rotor position sensor

Brake power consumption

12 W

Rotor position encoder, sinusoidal/cosinusoidal periods per revolution

128

CE marking (see declaration of conformity)

As per EU EMC directive As per EU low voltage directive

Storage temperature

-20 °C ... 70 °C

Certification

RCM compliance mark c UL us - Recognized (OL)

Stall torque

3.5 Nm

Switching cycles, holding brake

5 million idle actuations (without friction work!)

Type code

EMME-AS

Safety Integrity Level (SIL), subcomponent

SIL 2, rotor position sensor SILCL 2, rotor position sensor

Brake DC operating voltage

24 V

Motor nominal current

2.1 A

Typical rotor position sensor resolution

15 bit

Winding inductance phase-phase

22.8 mH

Corrosion resistance class (CRC)

0 - No corrosion stress

Total output inertia moment

2.2 kgcm²

Brake mass moment of inertia

0.222 kgcm²

MTTF, subcomponent

797 years, holding brake

Note on materials

Contains paint-wetting impairment substances RoHS-compliant

Product condition

New Factory Sealed

New Factory Sealed - New condition, never used, original OEM part with original packaging and factory seal.

Recommended parts

UBC10.241

PULS UBC10.241 is an Uninterruptible Power Supply (UPS) control module within the U-series, featuring a built-in battery with a 50% power reserve and a green status LED. This module is housed in aluminium and utilizes spring-clamp connections for installation. It measures W123mm x H124mm x D119mm and operates on a supply voltage range of 22.5Vdc to 30Vdc, with a nominal 24Vdc. The rated current is 10A at 22.5Vdc and can reach up to 15A in buffer mode for less than 5 seconds at full output voltage. It supports DIN rail mounting and can operate in ambient air temperatures ranging from 0 to +40°C. The current consumption is 1.1A at a 24Vdc input, and it is designed for DC networks. Visual position indicators include Ready, Buffering, Inhibit, and Replace Battery. Protection functions include output overvoltage protection with a typical 32Vdc and a maximum of 35Vdc, and overload/short-circuit protection with a minimum of 17.9A and a maximum of 21A at load impedance. It is advised not to use the DC-UPS in parallel to increase output power, but paralleling two units for 1+1 redundancy is possible for higher system reliability. The output voltage is regulated at 22.5Vdc in buffer mode with a 23Vdc turn-ON. The efficiency is rated at 0.978 with a 24Vdc input, and the rated power is 360W at 24Vdc and 240W/360W in buffer mode. Power dissipation/losses are 2.9W with a 24Vdc input at 0A output current and 5.5W at 10A output current. Ripple is maintained at 20mVpp across a frequency range of 20Hz to 20MHz at 50Ω. The electrical durability is rated at 137400 hours at 40°C with a 10A output and 24Vdc input, equivalent to 15 years or 131400 hours at both 40°C with a 5A output and 25°C with a 10A output.

Puls

MG17416

Schneider Electric MG17416 is a Miniature Circuit Breaker (MCB) designed as a supplementary protector within the C60 UL1077 sub-range. It features a rated current of 15A and operates on a single pole (1 Pole(s)) configuration. The rated operating voltage (Ue) for this MCB is 277 V. It offers a short circuit breaking rating of 10kA AIR at 240Vac, 5kA AIR at 277Vac, and 10kA AIR at 65Vdc, with protection extended to 1 Pole(s). The tripping curve for this device is classified as type C.

Schneider Electric

CS5.241

PULS CS5.241 AC/DC Power Supply, 5A, 120W, 24DC output, 100-120 VAC input

Puls

DKF 28-27-1

Turck - DKF 28-27-1

Turck

222

G10S0000

Red Lion G10S0000 is an HMI / Display unit from the HMI Rugged Graphite series designed for both indoor and outdoor use. It features an HMI operator touchscreen panel with a connection interface that includes 1 x RJ45 port for Ethernet, 2 x RJ11 ports for RS-232, and 1 x RJ45 port supporting both RS-422 and RS-485 communication protocols. The unit operates on a supply voltage range of 10-30Vdc, accommodating both 12Vdc and 24Vdc systems. It is engineered to function within an ambient air temperature range of -20 to +60 °C and offers a degree of protection rated at IP66 and NEMA 4X. The G10S0000 is equipped with 7 module slots for connection capacity, and its power consumption is typically 18 W, with a maximum of 53 W. The electrical durability of the backlight is rated at 35,000 hours. For storage, it includes an SD card slot, and it boasts a brightness level of 2500cd/m2.

Red Lion

S29371

Square D by Schneider Electric S29371 is a locking device designed for fixed OFF or ON locking. It functions as a padlocking device, ensuring secure locking capabilities. The dimensions of this part are a net width of 60 mm, a net height of 21 mm, and a net depth of 59 mm.

Schneider Electric