4267575 Festo Servo Motors

Product Details

• Number of pole pairs
  3
• Rotor position sensor measuring principle
  Optical
• Brake DC operating voltage
  24 V
• Motor constants
  0.75 Nm/A
• Rotor position encoder, typical angular accuracy
  20 arcmin
• Winding inductance phase-phase
  31.9 mH
• Rotor position sensor
  Safety encoder, absolute multi-turn
• Performance Level (PL), subcomponent
  Category 3, performance level d, rotor position encoder
• Nominal rotary speed
  3000 1/min
• Brake power consumption
  11 W
• Motor nominal current
  0.8 A
• Type code
  EMME-AS
• PFHd, subcomponent
  1.3 x 10E-8, rotor position sensor
• Insulation protection class
  F
• Nominal operating voltage DC
  360 V
• Rotor position encoder, sinusoidal/cosinusoidal periods per revolution
  128
• Type of winding switch
  Star inside
• CE marking (see declaration of conformity)
  As per EU EMC directive As per EU low voltage directive
• Degree of protection
  IP21
• Stall torque
  0.7 Nm
MTTFd, subcomponent
874 years, rotor position sensor
Conforms to standard
IEC 60034
Duration of use Tm, subcomponent
20 years, rotor position sensor
Continuous stall current
0.9 A
DC nominal voltage
360 V
Typical rotor position sensor resolution
15 bit
Voltage constant, phase-to-phase
49.6 mVmin
Storage temperature
-20 °C ... 70 °C
Relative air humidity
0 - 90 %
Nominal torque
0.6 Nm
Product weight
1650 g
Rotor position sensor interface
HIPERFACE®
Safety Integrity Level (SIL), subcomponent
SIL 2, rotor position sensor SILCL 2, rotor position sensor
Max. rotational speed
5131 1/min
Motor nominal power
190 W
Peak current
3.6 A
Rating class according to EN 60034-1
S1
Brake holding torque
2 Nm
Permissible radial shaft load
250 N
MTTF, subcomponent
538 years, holding brake
Note on materials
Contains paint-wetting impairment substances RoHS-compliant
Phase-phase winding resistance
26.4 Ohm
Corrosion resistance class (CRC)
0 - No corrosion stress
Ambient temperature
-10 °C ... 40 °C
Total output inertia moment
0.319 kgcm²
Permissible axial shaft load
50 N
Electrical connection technology
Plug
Certification
RCM compliance mark c UL us - Recognized (OL)
Brake mass moment of inertia
0.086 kgcm²
Peak torque
2.8 Nm
Switching cycles, holding brake
5 million idle actuations (without friction work!)
Featherkey shaft design
DIN 6885 A 5 x 5 x 22

4267575 Related Documents