3998920 Festo Sensor Boxes

Name: 3998920
Brand: Festo

Part#:3998920

Manufacturer:Festo

Alt. Part#:SRBE-CA3-YR90-N-1-P-C2N12-C1

Product Lifecycle:Active

Get a quick Quote!

sensor box SRBE-CA3-YR90-N-1-P-C2N12-C1 For electrical feedback and position monitoring of process valves actuated with pneumatic quarter turn actuators, inductive measuring principle. Design: Angular, Based on the standard: (* EN 60947-5-2, * ISO 5211, *

About the manufacturer: Festo is one of the manufacturers that offers Sensor Boxes that you can order at Powermatic Associates site. Festo Corp. has been a top supplier of automation and intelligent automation solutions for more than four decades in the United States and eight decades globally. The company is committed to transforming the manufacturing sector and enhancing business efficiency.

Check out the 3998920 Festo price in the box on the right side or send a quick quote.

Product Details

Ambient temperature
-20 °C ... 60 °C
Idle current
≤ 15 mA
Product weight
1700 g
Shaft material
High-alloy stainless steel
Pointer material
PC
Shock resistance
Shock test with severity level 2 as per FN 942017-5 and EN 60068-2-27
Design
Rectangular
CE marking (see declaration of conformity)
As per EU EMC directive
Explosion prevention and protection
Zone 1 (ATEX) Class II, Div. 1 (US)
Certificate issuing authority
CSA 263311
Max. output current DC
100 mA
Cable fitting
1/2 NPT
Housing colour
Silver
Seals material
NBR
Disc material
High-alloy stainless steel
Contamination level
3
Based on norm
EN 60947-5-2 VDI/VDE 3845
Type of ignition protection for gas
AEx d IIB T5 Gb Ex nA IIC T5 Gc
Explosion protection certification outside the EU
Class I, Div. 1 (CA) EPL Gc (US)
Switching output
PNP

Short-circuit protection

Pulsed

Reverse polarity protection

for all electrical connections

Housing material

Die-cast aluminum

Material of mounting bracket

High-alloy stainless steel

Angle detection setting range

0 deg ... 90 deg

Degree of protection

IP67 NEMA 4/4X

Type code

SRBE

Certification

RCM compliance mark

Type of (ignition) protection for dust

AEx tb IIIC T108°C Db Ex tb IIIC T108°C Db

ATEX category for dust

II 2D

Safety integrity level (SIL)

SIL 2

Switching element function

N/O contact

Residual current

0 mA ... 0.5 mA

Closable nominal conductor cross-section

0.25 mm² ... 2.5 mm²

Type of mounting

On flange as per ISO 5211 With mounting bracket

Mounting position

Any

Position indicator

Yellow/red

Storage temperature

-20 °C ... 60 °C

Connection for valve positioner and position sensor conforms to standard

VDI/VDE 3845 size AA 1

ATEX category gas

II 2G

Explosive ambient temperature

-20°C <= Ta <= +60°C

Note on materials

Contains paint-wetting impairment substances RoHS-compliant

Measuring principle

Inductive

Voltage drop

≤ 3 V

DC operating voltage range

10 V ... 30 V

Electrical connection

10-pin Screw terminal

Material of screws

High-alloy stainless steel

Circlip material

High-alloy stainless steel

Vibration resistance

Transport application test with severity level 2 as per FN 942017-4 and EN 60068-2-6

Product condition

New Factory Sealed

New Factory Sealed - New condition, never used, original OEM part with original packaging and factory seal.

Recommended parts

UBC10.241

PULS UBC10.241 is an Uninterruptible Power Supply (UPS) control module within the U-series, featuring a built-in battery with a 50% power reserve and a green status LED. This module is housed in aluminium and utilizes spring-clamp connections for installation. It measures W123mm x H124mm x D119mm and operates on a supply voltage range of 22.5Vdc to 30Vdc, with a nominal 24Vdc. The rated current is 10A at 22.5Vdc and can reach up to 15A in buffer mode for less than 5 seconds at full output voltage. It supports DIN rail mounting and can operate in ambient air temperatures ranging from 0 to +40°C. The current consumption is 1.1A at a 24Vdc input, and it is designed for DC networks. Visual position indicators include Ready, Buffering, Inhibit, and Replace Battery. Protection functions include output overvoltage protection with a typical 32Vdc and a maximum of 35Vdc, and overload/short-circuit protection with a minimum of 17.9A and a maximum of 21A at load impedance. It is advised not to use the DC-UPS in parallel to increase output power, but paralleling two units for 1+1 redundancy is possible for higher system reliability. The output voltage is regulated at 22.5Vdc in buffer mode with a 23Vdc turn-ON. The efficiency is rated at 0.978 with a 24Vdc input, and the rated power is 360W at 24Vdc and 240W/360W in buffer mode. Power dissipation/losses are 2.9W with a 24Vdc input at 0A output current and 5.5W at 10A output current. Ripple is maintained at 20mVpp across a frequency range of 20Hz to 20MHz at 50Ω. The electrical durability is rated at 137400 hours at 40°C with a 10A output and 24Vdc input, equivalent to 15 years or 131400 hours at both 40°C with a 5A output and 25°C with a 10A output.

Puls

MG17416

Schneider Electric MG17416 is a Miniature Circuit Breaker (MCB) designed as a supplementary protector within the C60 UL1077 sub-range. It features a rated current of 15A and operates on a single pole (1 Pole(s)) configuration. The rated operating voltage (Ue) for this MCB is 277 V. It offers a short circuit breaking rating of 10kA AIR at 240Vac, 5kA AIR at 277Vac, and 10kA AIR at 65Vdc, with protection extended to 1 Pole(s). The tripping curve for this device is classified as type C.

Schneider Electric

CS5.241

PULS CS5.241 AC/DC Power Supply, 5A, 120W, 24DC output, 100-120 VAC input

Puls

DKF 28-27-1

Turck - DKF 28-27-1

Turck

222

G10S0000

Red Lion G10S0000 is an HMI / Display unit from the HMI Rugged Graphite series designed for both indoor and outdoor use. It features an HMI operator touchscreen panel with a connection interface that includes 1 x RJ45 port for Ethernet, 2 x RJ11 ports for RS-232, and 1 x RJ45 port supporting both RS-422 and RS-485 communication protocols. The unit operates on a supply voltage range of 10-30Vdc, accommodating both 12Vdc and 24Vdc systems. It is engineered to function within an ambient air temperature range of -20 to +60 °C and offers a degree of protection rated at IP66 and NEMA 4X. The G10S0000 is equipped with 7 module slots for connection capacity, and its power consumption is typically 18 W, with a maximum of 53 W. The electrical durability of the backlight is rated at 35,000 hours. For storage, it includes an SD card slot, and it boasts a brightness level of 2500cd/m2.

Red Lion

S29371

Square D by Schneider Electric S29371 is a locking device designed for fixed OFF or ON locking. It functions as a padlocking device, ensuring secure locking capabilities. The dimensions of this part are a net width of 60 mm, a net height of 21 mm, and a net depth of 59 mm.

Schneider Electric