163794 Festo Directional Control Valves

Name: 163794
Brand: Festo

Part#:163794

Manufacturer:Festo

Category:Directional Control Valves

Alt. Part#:CPE18-M3H-5L-QS-8

Product Lifecycle:Active

Get a quick Quote!

solenoid valve CPE18-M3H-5L-QS-8 High component density Valve function: 5/2 monostable, Type of actuation: electrical, Width: 18 mm, Standard nominal flow rate: 850 l/min, Operating pressure: 2,5 - 10 bar

About the manufacturer: Festo is one of the manufacturers that offers Directional Control Valves that you can order at Powermatic Associates site. Festo Corp. has been a top supplier of automation and intelligent automation solutions for more than four decades in the United States and eight decades globally. The company is committed to transforming the manufacturing sector and enhancing business efficiency.

Check out the 163794 Festo price in the box on the right side or send a quick quote.

Product Details

Maritime classification
See certificate
Standard nominal flow rate
850 l/min
Reset method
Pneumatic spring
Manual override
Detenting via accessory Non-detenting
Switching time off
20 ms
Max. positive test pulse with 0 signal
3300 µs
Operating voltage
230V AC
Actuation type
Electrical
Pneumatic working port
QS-8
Design
Piston gate valve
Nominal width
8 mm
Mounting position
Any
Type of control
Pilot-controlled
On switching time
26 ms
Permissible voltage fluctuations
-15 % / +10 %
Ambient temperature
-5 °C ... 50 °C
Pilot exhaust air port 84
M5
Pneumatic connection 1
QS-8
Seals material
NBR
Lap
Overlap

Operating pressure

2.5 bar ... 10 bar

Type code

CPE18

Symbol

00991023

Duty cycle

100%

Vibration resistance

Transport application test with severity level 2 as per FN 942017-4 and EN 60068-2-6

Type of mounting

With through-hole

Pneumatic connection 4

QS-8

Valve function

5/2, monostable

Width

18 mm

Certification

c UL us - Recognized (OL)

Sealing principle

Soft

Pilot air supply port

Internal

Valve position ID

Label holder

Coil characteristics

230 V AC: 50/60 Hz, initial power 3.0 VA, holding power 2.4 VA

Operating medium

Compressed air as per ISO 8573-1:2010 [7:4:4]

Corrosion resistance class (CRC)

2 - Moderate corrosion stress

Electrical connection

Form C

Pilot exhaust air port 82

Pneumatic connection 3

G1/4

Pneumatic connection 5

G1/4

Degree of protection

IP65 as per IEC 60529

Exhaust air function

With flow control option

Flow direction

Non-reversible

Max. negative test pulse on 1 signal

3100 µs

Information on operating and pilot media

Operation with oil lubrication possible (required for further use)

Pilot air port 12

Pneumatic connection 2

QS-8

Shock resistance

Shock test with severity level 2 as per FN 942017-5 and EN 60068-2-27

Temperature of medium

-5 °C ... 50 °C

Pilot air port 14

Note on materials

RoHS-compliant

Housing material

Die-cast aluminum

Product condition

New Factory Sealed

New Factory Sealed - New condition, never used, original OEM part with original packaging and factory seal.

Recommended parts

UBC10.241

PULS UBC10.241 is an Uninterruptible Power Supply (UPS) control module within the U-series, featuring a built-in battery with a 50% power reserve and a green status LED. This module is housed in aluminium and utilizes spring-clamp connections for installation. It measures W123mm x H124mm x D119mm and operates on a supply voltage range of 22.5Vdc to 30Vdc, with a nominal 24Vdc. The rated current is 10A at 22.5Vdc and can reach up to 15A in buffer mode for less than 5 seconds at full output voltage. It supports DIN rail mounting and can operate in ambient air temperatures ranging from 0 to +40°C. The current consumption is 1.1A at a 24Vdc input, and it is designed for DC networks. Visual position indicators include Ready, Buffering, Inhibit, and Replace Battery. Protection functions include output overvoltage protection with a typical 32Vdc and a maximum of 35Vdc, and overload/short-circuit protection with a minimum of 17.9A and a maximum of 21A at load impedance. It is advised not to use the DC-UPS in parallel to increase output power, but paralleling two units for 1+1 redundancy is possible for higher system reliability. The output voltage is regulated at 22.5Vdc in buffer mode with a 23Vdc turn-ON. The efficiency is rated at 0.978 with a 24Vdc input, and the rated power is 360W at 24Vdc and 240W/360W in buffer mode. Power dissipation/losses are 2.9W with a 24Vdc input at 0A output current and 5.5W at 10A output current. Ripple is maintained at 20mVpp across a frequency range of 20Hz to 20MHz at 50Ω. The electrical durability is rated at 137400 hours at 40°C with a 10A output and 24Vdc input, equivalent to 15 years or 131400 hours at both 40°C with a 5A output and 25°C with a 10A output.

Puls

QO1HPL

Square D by Schneider Electric QO1HPL is a padlocking device designed for loose attachment, primarily serving the function of locking.

Schneider Electric

CS5.241

PULS CS5.241 AC/DC Power Supply, 5A, 120W, 24DC output, 100-120 VAC input

Puls

DKF 28-27-1

DKF 28-27-1 Turck - DKF 28-27-1 Actuator and Sensor Receptacle, Front Mount

Turck

212

G10S0000

Red Lion G10S0000 is an HMI / Display unit from the HMI Rugged Graphite series designed for both indoor and outdoor use. It features an HMI operator touchscreen panel with a connection interface that includes 1 x RJ45 port for Ethernet, 2 x RJ11 ports for RS-232, and 1 x RJ45 port supporting both RS-422 and RS-485 communication protocols. The unit operates on a supply voltage range of 10-30Vdc, accommodating both 12Vdc and 24Vdc systems. It is engineered to function within an ambient air temperature range of -20 to +60 °C and offers a degree of protection rated at IP66 and NEMA 4X. The G10S0000 is equipped with 7 module slots for connection capacity, and its power consumption is typically 18 W, with a maximum of 53 W. The electrical durability of the backlight is rated at 35,000 hours. For storage, it includes an SD card slot, and it boasts a brightness level of 2500cd/m2.

Red Lion

S29371

Square D by Schneider Electric S29371 is a locking device designed for fixed OFF or ON locking. It functions as a padlocking device, ensuring secure locking capabilities. The dimensions of this part are a net width of 60 mm, a net height of 21 mm, and a net depth of 59 mm.

Schneider Electric