163158 Festo Directional Control Valves

Name: 163158
Brand: Festo

Part#:163158

Manufacturer:Festo

Alt. Part#:CPE18-M1H-5L-QS-10

Product Lifecycle:Active

Get a quick Quote!

solenoid valve CPE18-M1H-5L-QS-10 High component density Valve function: 5/2 monostable, Type of actuation: electrical, Width: 18 mm, Standard nominal flow rate: 1000 l/min, Operating pressure: 2,5 - 10 bar

About the manufacturer: Festo is one of the manufacturers that offers Directional Control Valves that you can order at Powermatic Associates site. Festo Corp. has been a top supplier of automation and intelligent automation solutions for more than four decades in the United States and eight decades globally. The company is committed to transforming the manufacturing sector and enhancing business efficiency.

Check out the 163158 Festo price in the box on the right side or send a quick quote.

Product Details

Lap
Overlap
Reset method
Pneumatic spring
Manual override
Detenting via accessory Non-detenting
Switching time off
20 ms
Permissible voltage fluctuations
-15 % / +10 %
Vibration resistance
Transport application test with severity level 2 as per FN 942017-4 and EN 60068-2-6
Pilot air port 12
M5
Pneumatic connection 3
G1/4
Pneumatic connection 4
QS-10
Valve function
5/2, monostable
Width
18 mm
Operating pressure
2.5 bar ... 10 bar
Type code
CPE18
Sealing principle
Soft
Flow direction
Non-reversible
Valve position ID
Label holder
Duty cycle
100%
Shock resistance
Shock test with severity level 2 as per FN 942017-5 and EN 60068-2-27
Electrical connection
Form C
Type of mounting
With through-hole

Note on materials

RoHS-compliant

Standard nominal flow rate

1000 l/min

Design

Piston gate valve

Certification

c UL us - Recognized (OL)

Type of control

Pilot-controlled

On switching time

26 ms

Information on operating and pilot media

Operation with oil lubrication possible (required for further use)

Temperature of medium

-5 °C ... 50 °C

Pilot exhaust air port 84

Pneumatic connection 1

QS-10

Pneumatic connection 5

G1/4

Actuation type

Electrical

Operating voltage

24V DC

Nominal width

8 mm

Mounting position

Any

Symbol

00991023

Max. negative test pulse on 1 signal

3100 µs

Operating medium

Compressed air as per ISO 8573-1:2010 [7:4:4]

Corrosion resistance class (CRC)

2 - Moderate corrosion stress

Pilot exhaust air port 82

Pilot air port 14

Seals material

NBR

Maritime classification

See certificate

Pneumatic working port

QS-10

Degree of protection

IP65 as per IEC 60529

Exhaust air function

With flow control option

Pilot air supply port

Internal

Max. positive test pulse with 0 signal

3300 µs

Coil characteristics

24 V DC: 1.5 W

Ambient temperature

-5 °C ... 50 °C

Pneumatic connection 2

QS-10

Housing material

Die-cast aluminum

Product condition

New Factory Sealed

New Factory Sealed - New condition, never used, original OEM part with original packaging and factory seal.

Recommended parts

UBC10.241

PULS UBC10.241 is an Uninterruptible Power Supply (UPS) control module within the U-series, featuring a built-in battery with a 50% power reserve and a green status LED. This module is housed in aluminium and utilizes spring-clamp connections for installation. It measures W123mm x H124mm x D119mm and operates on a supply voltage range of 22.5Vdc to 30Vdc, with a nominal 24Vdc. The rated current is 10A at 22.5Vdc and can reach up to 15A in buffer mode for less than 5 seconds at full output voltage. It supports DIN rail mounting and can operate in ambient air temperatures ranging from 0 to +40°C. The current consumption is 1.1A at a 24Vdc input, and it is designed for DC networks. Visual position indicators include Ready, Buffering, Inhibit, and Replace Battery. Protection functions include output overvoltage protection with a typical 32Vdc and a maximum of 35Vdc, and overload/short-circuit protection with a minimum of 17.9A and a maximum of 21A at load impedance. It is advised not to use the DC-UPS in parallel to increase output power, but paralleling two units for 1+1 redundancy is possible for higher system reliability. The output voltage is regulated at 22.5Vdc in buffer mode with a 23Vdc turn-ON. The efficiency is rated at 0.978 with a 24Vdc input, and the rated power is 360W at 24Vdc and 240W/360W in buffer mode. Power dissipation/losses are 2.9W with a 24Vdc input at 0A output current and 5.5W at 10A output current. Ripple is maintained at 20mVpp across a frequency range of 20Hz to 20MHz at 50Ω. The electrical durability is rated at 137400 hours at 40°C with a 10A output and 24Vdc input, equivalent to 15 years or 131400 hours at both 40°C with a 5A output and 25°C with a 10A output.

Puls

CS5.241

PULS CS5.241 AC/DC Power Supply, 5A, 120W, 24DC output, 100-120 VAC input

Puls

DKF 28-27-1

DKF 28-27-1 Turck - DKF 28-27-1 Actuator and Sensor Receptacle, Front Mount

Turck

222

G10S0000

Red Lion G10S0000 is an HMI / Display unit from the HMI Rugged Graphite series designed for both indoor and outdoor use. It features an HMI operator touchscreen panel with a connection interface that includes 1 x RJ45 port for Ethernet, 2 x RJ11 ports for RS-232, and 1 x RJ45 port supporting both RS-422 and RS-485 communication protocols. The unit operates on a supply voltage range of 10-30Vdc, accommodating both 12Vdc and 24Vdc systems. It is engineered to function within an ambient air temperature range of -20 to +60 °C and offers a degree of protection rated at IP66 and NEMA 4X. The G10S0000 is equipped with 7 module slots for connection capacity, and its power consumption is typically 18 W, with a maximum of 53 W. The electrical durability of the backlight is rated at 35,000 hours. For storage, it includes an SD card slot, and it boasts a brightness level of 2500cd/m2.

Red Lion

S29371

Square D by Schneider Electric S29371 is a locking device designed for fixed OFF or ON locking. It functions as a padlocking device, ensuring secure locking capabilities. The dimensions of this part are a net width of 60 mm, a net height of 21 mm, and a net depth of 59 mm.

Schneider Electric