SSA-EB1PLYR-0DED1Q8R Banner Emergency Stop Push Buttons

Name: SSA-EB1PLYR-0DED1Q8R
Brand: Banner

Banner SSA-EB1PLYR-0DED1Q8R Emergency Stop with ISD: Flush Mount 40 mm Push Button; Illuminated Color: Yellow/Red Flashing; 2 N.C. OSSD Safety Contacts, IP65; 8-pin M12 QD; Local Reset Input

Part#:SSA-EB1PLYR-0DED1Q8R

Manufacturer:Banner

Alt. Part#:809270

Product Lifecycle:Active

Get a quick Quote!

Emergency Stop with ISD: Flush Mount 40 mm Push Button; Illuminated Color: Yellow/Red Flashing; 2 N.C. OSSD Safety Contacts, IP65; 8-pin M12 QD; Local Reset Input

About the manufacturer: Banner is one of the manufacturers that offers Emergency Stop Push Buttons that you can order at Powermatic Associates site. Banner Engineering Corp. is a globally renowned leader in the industrial automation sector. Our diverse product line, comprising sensors, vision sensors, LED lights, indicators, wireless devices, and safety products, caters to businesses of all sizes worldwide.

Check out the SSA-EB1PLYR-0DED1Q8R Banner price in the box on the right side or send a quick quote.

Product Details

Weight
421.84056 g
Country Of Origin
JP
Dimensions (HxWxD mm )
103 x 110 x 81
Actuation
Twist-to-Release
Min Operating Temperature ( °C)
-25
Contact Rating
24 V dc @ 0.1 A each
Max Operating Temperature ( °C)
50
Button Diameter (mm)
40
Actuator/Button Material
Thermoplastic
Mounting Thread/Style
Flat
Contact Quantity
2 NC OSSD
Feature: Lockable
No
Feature: Illuminated
Yes
In-Series Diagnostics
Yes
Housing Style
Base
Device Type
Push Button
Button Shroud
No
Actuated Color
Red - Flash
Illumination Type
Base
Primary Housing Material
Polycarbonate

IP Rating

IP65

Connection Type

M12 (Euro)

Armed Color (Solid)

Yellow

Product condition

New Factory Sealed

New Factory Sealed - New condition, never used, original OEM part with original packaging and factory seal.

SSA-EB1PLYR-0DED1Q8R Description

Emergency Stop with ISD: Flush Mount 40 mm Push Button, Illuminated Color: Yellow/Red Flashing, 2 N.C. OSSD Safety Contacts, IP65, 8 Pin Euro-style Quick-Disconnect Connector, Local Reset Input

Relevant products

SLC4P14-160P44

Verified stock: 0

Banner Engineering SLC4P14-160P44 is a safety light curtain designed for finger detection with a resolution of 14mm, featuring both emitter and receiver pairs. It is constructed with a polycarbonate (PC) housing and end caps, and it comes pre-wired with a 300mm pigtail that terminates with a 4-pin Euro-style M12 connector. This part offers a protective height of 160mm and is housed in yellow. It operates on a 24Vdc supply voltage and can function within an ambient air temperature range of -20 to +55°C. The SLC4P14-160P44 is IP65 rated, indicating protection against dust ingress and low-pressure water jets from any direction. It has a net width of 27mm, a net height of 174mm, and a net depth of 23mm. The light curtain features a 14mm beam spacing/pitch and provides a sensing distance ranging from 10cm to 2m. It emits infrared (IR) light with a wavelength of 860 nm and includes 2 x digital outputs (24Vdc; 300mA; sourcing; redundant OSSD solid-state outputs) for connectivity.

Banner

BWC-LMRSFRPB

Verified stock: 1

Surge Suppressor Bulkhead; RP-SMA

Banner

SMB46U

Verified stock: 0

Bracket: U; Material: 14 Gauge 316 Stainless Steel

Banner

BWA-QD5.5

Verified stock: 0

5-pin M12 Prewired; 1/2-14 in NBSM

Banner

73122

Verified stock: 0

Banner - 73122

Banner

WLF12PXRGB1200SQP

Verified stock: 0

WLF12 Pro Flexible Strip: 1200 mm; 12 V dc or 12-30 V dc when using LC25 LED Controller; IP66, IP67, IP69K; RGB; Clear; Non-Cascadable; 150 mm (6 in) 4-pin M12 PVC Pigtail QD

Banner

SLC4P14-160P44

Verified stock: 0

Banner

SLC4P14-160P44

Verified stock: 0

Banner

What can I help you find today?

Recommended parts

UBC10.241

PULS UBC10.241 is an Uninterruptible Power Supply (UPS) control module within the U-series, featuring a built-in battery with a 50% power reserve and a green status LED. This module is housed in aluminium and utilizes spring-clamp connections for installation. It measures W123mm x H124mm x D119mm and operates on a supply voltage range of 22.5Vdc to 30Vdc, with a nominal 24Vdc. The rated current is 10A at 22.5Vdc and can reach up to 15A in buffer mode for less than 5 seconds at full output voltage. It supports DIN rail mounting and can operate in ambient air temperatures ranging from 0 to +40°C. The current consumption is 1.1A at a 24Vdc input, and it is designed for DC networks. Visual position indicators include Ready, Buffering, Inhibit, and Replace Battery. Protection functions include output overvoltage protection with a typical 32Vdc and a maximum of 35Vdc, and overload/short-circuit protection with a minimum of 17.9A and a maximum of 21A at load impedance. It is advised not to use the DC-UPS in parallel to increase output power, but paralleling two units for 1+1 redundancy is possible for higher system reliability. The output voltage is regulated at 22.5Vdc in buffer mode with a 23Vdc turn-ON. The efficiency is rated at 0.978 with a 24Vdc input, and the rated power is 360W at 24Vdc and 240W/360W in buffer mode. Power dissipation/losses are 2.9W with a 24Vdc input at 0A output current and 5.5W at 10A output current. Ripple is maintained at 20mVpp across a frequency range of 20Hz to 20MHz at 50Ω. The electrical durability is rated at 137400 hours at 40°C with a 10A output and 24Vdc input, equivalent to 15 years or 131400 hours at both 40°C with a 5A output and 25°C with a 10A output.

Puls

RSC RKC 572-8.2M/TR2

DeviceNet™ Cordset, Extension Cordset, , Straight Male M12 eurofast Connector, Straight Female M12 eurofast Connector

Turck

CS5.241

PULS CS5.241 AC/DC Power Supply, 5A, 120W, 24DC output, 100-120 VAC input

Puls

DKF 28-27-1

Actuator and Sensor Receptacle, Front Mount, , Female M27 multifast Receptacle

Turck

242

G10S0000

Red Lion G10S0000 is an HMI / Display unit from the HMI Rugged Graphite series designed for both indoor and outdoor use. It features an HMI operator touchscreen panel with a connection interface that includes 1 x RJ45 port for Ethernet, 2 x RJ11 ports for RS-232, and 1 x RJ45 port supporting both RS-422 and RS-485 communication protocols. The unit operates on a supply voltage range of 10-30Vdc, accommodating both 12Vdc and 24Vdc systems. It is engineered to function within an ambient air temperature range of -20 to +60 °C and offers a degree of protection rated at IP66 and NEMA 4X. The G10S0000 is equipped with 7 module slots for connection capacity, and its power consumption is typically 18 W, with a maximum of 53 W. The electrical durability of the backlight is rated at 35,000 hours. For storage, it includes an SD card slot, and it boasts a brightness level of 2500cd/m2.

Red Lion

S29371

Square D by Schneider Electric S29371 is a locking device designed for fixed OFF or ON locking. It functions as a padlocking device, ensuring secure locking capabilities. The dimensions of this part are a net width of 60 mm, a net height of 21 mm, and a net depth of 59 mm.

Schneider Electric

UBC10.241

Puls

G10S0000

Red Lion

UBC10.241

Puls

SSA-EB1PLYR-0DED1Q8R Banner Emergency Stop Push Buttons

Part#:SSA-EB1PLYR-0DED1Q8R

Manufacturer:Banner

Alt. Part#:809270

Product Details

Product condition

SSA-EB1PLYR-0DED1Q8R Description

Related documents SSA-EB1PLYR-0DED1Q8R Specs

Relevant products

BWC-LMRSFRPB

SMB46U

BWA-QD5.5

73122

WLF12PXRGB1200SQP

Recommended parts

RSC RKC 572-8.2M/TR2

CS5.241

DKF 28-27-1

G10S0000

S29371