RSC RKC 572-2M

Cable for DeviceNet and CANopen, Extension Cable, Cable length (L) 2 m, M12 female connector, straight, A-coded, M12 male connector, straight, A-coded, M12, Male, Straight, 5-pin, A-Code, M12, Female, Straight, 5-pin, A-Code, Shielded Twisted Pair, Fieldbus Technology Cable, fieldbus type: DeviceNet™, Gray PVC jacket, shielded, 2STPX22 AWG, Sunlight Resistant, Flame Ratings: UL 1685 FT4, UL1061, CSA FT4, Cable length: 2 m

Turck

35

PKG 3M-3.5-PSG 3

Turck PKG 3M-3.5-PSG 3 is a double-ended cable/cordset designed for automation applications, featuring a 4.4mm cable sheath outer diameter and a length of 3.5 meters (approximately 11 feet). It is equipped with a 3-pin M8 picofast female connector and a 3-pin M8 picofast male connector, both with M8x1 threaded coupling nuts, facilitating secure connections. This cable operates with a rated current of 4A and a rated voltage of 125Vac. It is constructed with a PVC jacket and nickel-plated brass coupling nuts, ensuring durability. The cable supports a 3-wire configuration with a cross-section of 3 x #24AWG. It offers a high degree of protection, rated at IP67, NEMA 1, NEMA 3, NEMA 4, and NEMA 6P, suitable for various environmental conditions. The cable sheath is colored yellow for easy identification.

Turck

22

M9F42350

Schneider Electric M9F42350 is a Miniature Circuit Breaker (MCB) within the C60BP sub-range, designed to provide circuit protection. This MCB features three protected poles and operates with a rated current of 50A. It is engineered for a rated insulation voltage (Ui) of 500V, with a rated voltage for DC applications at 60Vdc and for AC applications at 240V phase-to-neutral and 415V phase-to-phase. The M9F42350 is equipped to handle rated impulse voltage (Uimp) of 6kV and offers a short circuit breaking rating of 14kA AIR at both 120Vac and 240Vac, and 10kA AIR at 480Y/277Vac and 60Vdc. It follows a C tripping curve, ensuring compliance with UL489 standards for safety and performance.

Schneider Electric

1

GVAN11

Schneider Electric GVAN11 is an auxiliary contact designed for use with the GV3 range, providing breaker status indication (Open/Closed). It features a rated insulation voltage (Ui) of 690 V, equipped with 1 Normally Open (NO) and 1 Normally Closed (NC) auxiliary contacts. The GVAN11 is engineered for mechanical durability of up to 100,000 operations at no load and maintains the same level of electrical durability with load, ensuring a total of 100,000 operations.

Schneider Electric

53

DK 26-631-3

Actuator and Sensor Cordset, Connection Cordset, , Straight Female M27 multifast Connector

Turck

2

RKS 8T-10

Actuator and Sensor Cordset, Connection Cordset, , Straight Female M12 eurofast Connector

Turck

49

WK 4.4T-2

Actuator and Sensor Cordset, Connection Cable, Cable length (L) 2 m, M12, Female, Right angle, 4-pin, Instrumentation Tray Cable, Gray PVC jacket, 4X22 AWG, Sunlight Resistant, -40 Cold Bend Rating, Oil Resistant, Flame Ratings: UL 1685 FT4, UL1061, CSA FT4, Flexlife® and C-Track Approved, Cable length: 2 m

Turck

10

KXT4CUAL2-3PC

KXT4CUAL2-3PC ABB Control - KIT FCCUAL 4-300AWG XT4 3PC UL/CSA

ABB Control

6

RSC RKC 572-2M

Cable for DeviceNet and CANopen, Extension Cable, Cable length (L) 2 m, M12 female connector, straight, A-coded, M12 male connector, straight, A-coded, M12, Male, Straight, 5-pin, A-Code, M12, Female, Straight, 5-pin, A-Code, Shielded Twisted Pair, Fieldbus Technology Cable, fieldbus type: DeviceNet™, Gray PVC jacket, shielded, 2STPX22 AWG, Sunlight Resistant, Flame Ratings: UL 1685 FT4, UL1061, CSA FT4, Cable length: 2 m

Turck

35

PKG 3M-3.5-PSG 3

Turck PKG 3M-3.5-PSG 3 is a double-ended cable/cordset designed for automation applications, featuring a 4.4mm cable sheath outer diameter and a length of 3.5 meters (approximately 11 feet). It is equipped with a 3-pin M8 picofast female connector and a 3-pin M8 picofast male connector, both with M8x1 threaded coupling nuts, facilitating secure connections. This cable operates with a rated current of 4A and a rated voltage of 125Vac. It is constructed with a PVC jacket and nickel-plated brass coupling nuts, ensuring durability. The cable supports a 3-wire configuration with a cross-section of 3 x #24AWG. It offers a high degree of protection, rated at IP67, NEMA 1, NEMA 3, NEMA 4, and NEMA 6P, suitable for various environmental conditions. The cable sheath is colored yellow for easy identification.

Turck

22

M9F42350

Schneider Electric M9F42350 is a Miniature Circuit Breaker (MCB) within the C60BP sub-range, designed to provide circuit protection. This MCB features three protected poles and operates with a rated current of 50A. It is engineered for a rated insulation voltage (Ui) of 500V, with a rated voltage for DC applications at 60Vdc and for AC applications at 240V phase-to-neutral and 415V phase-to-phase. The M9F42350 is equipped to handle rated impulse voltage (Uimp) of 6kV and offers a short circuit breaking rating of 14kA AIR at both 120Vac and 240Vac, and 10kA AIR at 480Y/277Vac and 60Vdc. It follows a C tripping curve, ensuring compliance with UL489 standards for safety and performance.

Schneider Electric

1

GVAN11

Schneider Electric GVAN11 is an auxiliary contact designed for use with the GV3 range, providing breaker status indication (Open/Closed). It features a rated insulation voltage (Ui) of 690 V, equipped with 1 Normally Open (NO) and 1 Normally Closed (NC) auxiliary contacts. The GVAN11 is engineered for mechanical durability of up to 100,000 operations at no load and maintains the same level of electrical durability with load, ensuring a total of 100,000 operations.

Schneider Electric

53

DK 26-631-3

Actuator and Sensor Cordset, Connection Cordset, , Straight Female M27 multifast Connector

Turck

2

RKS 8T-10

Actuator and Sensor Cordset, Connection Cordset, , Straight Female M12 eurofast Connector

Turck

49

WK 4.4T-2

Actuator and Sensor Cordset, Connection Cable, Cable length (L) 2 m, M12, Female, Right angle, 4-pin, Instrumentation Tray Cable, Gray PVC jacket, 4X22 AWG, Sunlight Resistant, -40 Cold Bend Rating, Oil Resistant, Flame Ratings: UL 1685 FT4, UL1061, CSA FT4, Flexlife® and C-Track Approved, Cable length: 2 m

Turck

10

KXT4CUAL2-3PC

KXT4CUAL2-3PC ABB Control - KIT FCCUAL 4-300AWG XT4 3PC UL/CSA

ABB Control

6

RSC RKC 572-2M

Cable for DeviceNet and CANopen, Extension Cable, Cable length (L) 2 m, M12 female connector, straight, A-coded, M12 male connector, straight, A-coded, M12, Male, Straight, 5-pin, A-Code, M12, Female, Straight, 5-pin, A-Code, Shielded Twisted Pair, Fieldbus Technology Cable, fieldbus type: DeviceNet™, Gray PVC jacket, shielded, 2STPX22 AWG, Sunlight Resistant, Flame Ratings: UL 1685 FT4, UL1061, CSA FT4, Cable length: 2 m

Turck

35

PKG 3M-3.5-PSG 3

Turck PKG 3M-3.5-PSG 3 is a double-ended cable/cordset designed for automation applications, featuring a 4.4mm cable sheath outer diameter and a length of 3.5 meters (approximately 11 feet). It is equipped with a 3-pin M8 picofast female connector and a 3-pin M8 picofast male connector, both with M8x1 threaded coupling nuts, facilitating secure connections. This cable operates with a rated current of 4A and a rated voltage of 125Vac. It is constructed with a PVC jacket and nickel-plated brass coupling nuts, ensuring durability. The cable supports a 3-wire configuration with a cross-section of 3 x #24AWG. It offers a high degree of protection, rated at IP67, NEMA 1, NEMA 3, NEMA 4, and NEMA 6P, suitable for various environmental conditions. The cable sheath is colored yellow for easy identification.

Turck

22

M9F42350

Schneider Electric M9F42350 is a Miniature Circuit Breaker (MCB) within the C60BP sub-range, designed to provide circuit protection. This MCB features three protected poles and operates with a rated current of 50A. It is engineered for a rated insulation voltage (Ui) of 500V, with a rated voltage for DC applications at 60Vdc and for AC applications at 240V phase-to-neutral and 415V phase-to-phase. The M9F42350 is equipped to handle rated impulse voltage (Uimp) of 6kV and offers a short circuit breaking rating of 14kA AIR at both 120Vac and 240Vac, and 10kA AIR at 480Y/277Vac and 60Vdc. It follows a C tripping curve, ensuring compliance with UL489 standards for safety and performance.

Schneider Electric

1

GVAN11

Schneider Electric GVAN11 is an auxiliary contact designed for use with the GV3 range, providing breaker status indication (Open/Closed). It features a rated insulation voltage (Ui) of 690 V, equipped with 1 Normally Open (NO) and 1 Normally Closed (NC) auxiliary contacts. The GVAN11 is engineered for mechanical durability of up to 100,000 operations at no load and maintains the same level of electrical durability with load, ensuring a total of 100,000 operations.

Schneider Electric

53

SMBPVA16 Banner Sensor Accessories

Part#:SMBPVA16

Manufacturer:Banner

Alt. Part#:56811

Product Details

Product condition

SMBPVA16 Description

$102.00

Recommended parts

RSC RKC 572-2M

PKG 3M-3.5-PSG 3

M9F42350

GVAN11

DK 26-631-3

RKS 8T-10

WK 4.4T-2

KXT4CUAL2-3PC

RSC RKC 572-2M

PKG 3M-3.5-PSG 3

M9F42350

GVAN11

DK 26-631-3

RKS 8T-10

WK 4.4T-2

KXT4CUAL2-3PC

RSC RKC 572-2M

PKG 3M-3.5-PSG 3

M9F42350

GVAN11