Industrial Automation Components - HMS Networks

Anybus by HMS Networks AB7562-F is a gateway within the X-gateway IIoT series designed for IIoT applications. It features a vertical or flat installation position with galvanic isolation on both BUS/Ethernet sides. The I/O configuration is manageable via USB port using Anybus Configuration Manager software. This part is equipped with a CC-Link slave and OPC UA-MQTT Ethernet dual-port cut-through switch, including 2 x station address switches (x10 / x1), 1 x baud rate switch, and 10 x LED indicators for fieldbus/sub-network/device status. It operates on a supply voltage of 19.2-28.8Vdc (24Vdc nom.) and has dimensions of H127mm x W44mm x D114mm. The housing is made from aluminium and plastic, featuring connection types of 2 x RJ45 connectors for 10/100Mbit/s Ethernet (full/half duplex), 1 x 5-pin CC-Link connector, 1 x 2-poles 5.08mm plug-in screw connector for power (X3), and 1 x USB connector (X4). It offers a degree of protection of IP20 NEMA 1 and supports DIN rail mounting. The communication protocols supported are CC-Link and OPC UA, with an ambient air temperature for operation ranging from -25 to +65 °C. The current consumption is 400mA (24Vdc; max.) and 200mA (typical), with an ambient air temperature for storage from -40 to +85 °C. The speed supported is 10/100Mbit/s for Ethernet and 156kbit/s to 10Mbit/s for CC-Link, in environments with 5-95% relative humidity (RH; non-condensing).

HMS eWon component

HMS eWon component

Anybus by HMS Networks AB7078-B is a gateway designed for serial communications within the Serial Communicators sub-range. This part functions as a serial communicator/gateway with configurable RS-232/422/485 protocols for produce/consume or query/response ASCII operations. It supports up to 31 stations when using RS485/422 and offers a baud rate range of 1.2-57.6kbit/s. The device is capable of executing a variety of Modbus commands and DF1 services, including reading and writing coils, registers, file records, and more, alongside diagnostics and data integrity checks. It features reverse voltage protection, short circuit protection, and galvanic isolation on the sub-network to enhance its operational safety. The AB7078-B boasts a mean time to failure (MTTF) greater than 550,000 hours, according to Telcordia Issue 2 / Method 1 Case 3 at 30°C, and can be installed at altitudes up to 2000m. It is designed to withstand industrial environmental conditions, with immunity to electrostatic discharge, electromagnetic RF fields, fast transients, surge protection, and RF conducted interference, while maintaining emissions within specified limits. The gateway includes a Serial + PROFINET-IRT Ethernet dual-port with 6 LED indicators for various statuses, and it requires a supply voltage of 21.6-26.4Vdc (24Vdc nominal). Its dimensions are H120mm x W27mm x D75mm, housed in a plastic (ABS / PC) casing. Connection interfaces include 2 x RJ45 connectors for PROFINET IRT, 1 x 9-pin D-sub female connector for serial communications, 1 x 2-poles plug-in connector for power, and 1 x RJ11 PC connector. It offers an IP20 NEMA 1 degree of protection and supports DIN rail mounting. The AB7078-B operates within an ambient air temperature range of 0 to +55 °C, with a current consumption of 300mA (max) and 100mA (typical), and can be stored in temperatures ranging from -40 to +85 °C. Humidity tolerance is 0-95% RH, non-condensing.

Anybus by HMS Networks AB7625-F is a gateway belonging to the X-gateway series designed to function as a protocol translator. This part facilitates vertical or flat installation and features galvanic isolation on both BUS and Ethernet sides. It allows for I/O configuration via a USB port using the Anybus Configuration Manager software. The design incorporates a Lonworks slave and a Modbus Plus slave, equipped with 1 x service pin, 10 x LED indicators for fieldbus, sub-network, and device status, 6 x node ID switches, and 6 x source ID switches. It operates on a supply voltage of 19.2-28.8Vdc, with 24Vdc nominal, and has dimensions of H127mm x W44mm x D114mm. The housing is made from aluminium and plastic, and connection types include 1 x 5-pin plug-in connector for LonWorks, 1 x 9-pin D-sub female connector for Modbus Plus, 1 x 9-pin D-sub male connector for serial RS-232 configuration, 1 x 2-poles 5.08mm plug-in screw connector for power, and 1 x USB connector. It offers an IP20 NEMA 1 degree of protection and is designed for DIN rail mounting. The communication protocols supported are LONworks and Modbus Plus, with an ambient air temperature for operation ranging from -25 to +65°C. The current consumption is 400mA maximum and 200mA typical, with an ambient air temperature for storage between -40 and +85°C. The speed is 78kbit/s for LonWorks and 1Mbit/s for Modbus Plus, and it can operate in 5-95% relative humidity (RH; non-condensing).

Anybus by HMS Networks AB7648-F is a gateway within the X-gateway series designed for protocol translation. It functions as an AS-Interface master and a PROFINET-IO device, facilitating communication between these two protocols. The gateway is configured vertically or flat with galvanic isolation on both the BUS and Ethernet sides to prevent electrical interference. Configuration is achieved via a USB port using the Anybus Configuration Manager software. It features 10 LED indicators for monitoring fieldbus, sub-network, and device status, and includes a single on-board configuration button for easy setup. The AB7648-F operates on a supply voltage of 19.2-28.8Vdc, with a nominal voltage of 24Vdc, and has dimensions of H127mm x W44mm x D114mm. The housing is made from aluminium and plastic, ensuring durability and lightness. Connection options include 1 x RJ45 LAN connector for 100Mbit/s Ethernet and PROFINET I.O. operations, 1 x 9-pin D-sub male connector for serial RS-232 configuration, 3 x 2-poles 5.08mm plug-in screw connectors for AS-interface and power connections, and 1 x USB connector for configuration purposes. It offers an IP20 and NEMA 1 degree of protection, suitable for DIN rail mounting. The AB7648-F supports AS-interface and PROFINET IO communication protocols, operates within an ambient air temperature range of -25 to +65°C, and consumes a maximum of 400mA current at 24Vdc. It is designed for environments with 5-95% relative humidity, non-condensing, and can store in temperatures ranging from -40 to +85°C. The gateway's speed capabilities are 100Mbit/s for PROFINET and 167kbit/s for the AS-interface.

HMS eWon component

HMS eWon component

Anybus by HMS Networks AB7500-F is a gateway belonging to the X-gateway series designed for protocol translation. It functions as a PROFIBUS master and a PROFINET-IRT device, featuring Ethernet dual-port cut-through switch technology. The device is configured via a USB port using the Anybus Configuration Manager software and requires installation in a vertical or flat position with galvanic isolation on both BUS/Ethernet sides. It includes 10 LED indicators for monitoring fieldbus, sub-network, and device status. The AB7500-F operates on a supply voltage of 19.2-28.8Vdc (24Vdc nominal) and has dimensions of H127mm x W44mm x D114mm. Its housing is made from aluminium and plastic, ensuring durability and resilience. Connection options include 2 x RJ45 connectors for 10/100Mbit/s Ethernet (full duplex, fixed), 1 x 9-pin D-sub female connector for PROFIBUS, 1 x 9-pin D-sub male connector for PROFIBUS and RS-232 configuration, 1 x 2-poles 5.08mm plug-in screw connector for power, and 1 x USB connector. The AB7500-F is designed for DIN rail mounting, offers an IP20 NEMA 1 degree of protection, and supports PROFIBUS and PROFINET communication protocols. It operates within an ambient air temperature range of -25 to +65 °C, with a current consumption of 400mA (max) and 200mA (typical). The device is suitable for environments with 5-95% relative humidity (non-condensing) and can store in temperatures ranging from -40 to +85 °C. Its Ethernet and PROFIBUS speeds are 10/100Mbit/s and up to 12Mbit/s, respectively.

Anybus by HMS Networks AB7517-F is a gateway within the X-gateway series designed for protocol translation. It features a vertical or flat installation position with galvanic isolation on both BUS/Ethernet sides. The I/O configuration is manageable via USB port using Anybus Configuration Manager software. This device integrates InterBus Fiber Optic and PROFINET-IRT with an Ethernet dual-port cut-through switch, 10 LED indicators for fieldbus/sub-network/device status, and a baud rate jumper. It operates on a supply voltage of 19.2-28.8Vdc (24Vdc nominal) and has dimensions of H127mm x W44mm x D114mm. The housing is made from aluminium and plastic, and connection options include 2 RJ45 connectors for 10/100Mbit/s Ethernet (full duplex, fixed), 2 fiber optic TX connectors, 2 fiber optic RX connectors, a 2-poles 5.08mm plug-in screw connector for power, and a USB connector. It offers an IP20 NEMA 1 degree of protection and is suitable for DIN rail mounting. The communication protocols supported are INTERBUS and PROFINET, with an ambient air temperature for operation ranging from -25 to +65 °C. The current consumption is 400mA (max) and 200mA (typical) at 24Vdc. It is designed for storage in temperatures ranging from -40 to +85 °C and can operate at speeds of 10/100Mbit/s (PROFINET) and 500kbit/s to 2Mbit/s (INTERBUS). The device is designed to withstand 5-95% relative humidity (RH; non-condensing).