Wago 2004-553 is a modular connector designed for jumper contact slot applications, featuring push-in CAGE CLAMP spring connections. It supports a rated current of 32A and is compatible with 0.5mm2 to 6mm2 stranded conductors, as well as 0.5mm2 to 6mm2 solid conductors, including #20AWG to #10AWG sizes for both stranded or solid types. This connector is part of the TOPJOB S series, constructed from Polyamide (PA) 66, ensuring compatibility with a control voltage that is plug-in. The net height and width are specified for 3-poles (3P) configurations, with a net height corresponding to an IEC rating of 6 kV and a diameter rated at IEC 500 V. The dimensions include a residual current sensitivity of W18.6mm, indicating its physical size and installation requirements.
3 in stock
24 hours
Schneider Electric LC1DT25BL is a magnetic contactor within the Deca sub-range, featuring a low-consumption coil that operates below 2.4W. This contactor is designed with screw connections and has a 4-pole (4NO) configuration. It is rated for a current of 25A under AC-1 conditions and is suitable for DIN rail mounting. The LC1DT25BL offers an IP20 degree of protection and operates with a control voltage range of 19.2-30Vdc, with a nominal 24Vdc. Its rated operating voltage (Ue) reaches up to 690 V, and it includes 1 Normally Open (NO) and 1 Normally Closed (NC) auxiliary contacts, both of the instantaneous type (1NO+1NC). The contactor is capable of withstanding rated impulse voltages up to 6 kV and has a mechanical durability of 15 million operations at no load. The rated voltage for phase-to-phase connections is 690 V, and the power consumption is specified at 2.4 W.
1 in stock
24 hours
Wago 870-924 is an end plate designed for use as both an end and intermediate plate in the X-COM series. It features a rated impulse voltage (Uimp) of 2 mm and is constructed from Polyamide (PA) 66. The part is characterized by its dimensions, H33.4mm x W2mm x D27.5mm, and is presented in orange.
200 in stock
24 hours
Wago 857-724 is a Solid State Relay (SSR) designed for plug-in input applications. It features push-in CAGE CLAMP spring connections for easy installation and is capable of handling a rated current of 3A continuously, with a maximum inrush current of 15A AC for 10ms. The SSR operates with a rated voltage of 0-30Vdc, nominally at 24Vdc, and is equipped with a pre-assembled socket base. It includes a yellow LED for status indication and supports a 2-wire connection. The device is designed to work within an ambient air temperature range for operation and storage of -20°C to +70°C. It offers a degree of protection rated at IP20 and has a control voltage range of 18.8-31.2Vdc, nominally at 24Vdc. The SSR's dimensions are H94mm x W6mm x D81mm, fitting a DIN-35 rail for mounting, and it features a 6mm width. Its response time is specified as 100μs for switching ON and 600μs for switching OFF, with a network frequency of 350Hz switching frequency. The device is designed to operate in environments with 5-85% relative humidity, without condensation.
1 in stock
24 hours
Wago 793-502 is a labeled WMB marking card designed for horizontal marking. It features a snap-on control voltage (AC) mechanism and is constructed from halogen-free materials. The card is white in color, has a residual current sensitivity specification, and is designed to accommodate a cross-section with a width of 5mm.
3 in stock
24 hours
WAGO 793-4569 is a marker card designed for thermal transfer marking with specifications including marking numbers 51 to 60, with 10 numbers marked horizontally in black. The markers are differentiated by consecutive numbers per strip, delivered in a form of 10 strips with 10 markers per card. The markers have a width of 4 to 4.2mm, with a specific marker width of 4mm, and are smear-resistant as per EN 60998-12004. These markers are white, UV resistant according to EN 60068-2-52010 Procedure B, halogen-free, and have a weight of 7.2g with a fire load of 0.215MJ. Classified under Terminal Block Accessories (Product Group 2), they comply with eClass 10.0 and 9.0, as well as ETIM 8.0 and 7.0 standards, identified as EC000761. Each package contains 5 pieces, packaged in a bag, with the country of origin being Germany (DE). The product's GTIN is 4044918693752, and it has a customs tariff number of 49119900000. It meets RoHS compliance without any exemptions.
6 in stock
24 hours
Wago 753-110 is a mounting accessory designed to function as a plug. It operates with a supply voltage of 0° AC and is suitable for use in ambient air temperatures ranging from C to +55° for operation and can be stored in temperatures ranging from C to +85°. This part does not specify a speed but offers a degree of protection rated at IP20. It does not utilize a control voltage specified in DC and communicates via a protocol denoted as IP20. The cross-section color is light gray, and its dimensions are W12mm x D74.3mm.
23 in stock
24 hours
Wago 758-879/000-001 is a memory card designed specifically for automation applications. This SD memory card operates effectively within an ambient air temperature range for operation of -40°C to +90°C and has the same temperature range for storage. It is characterized by a 2GB (SLC) network frequency and is built to withstand vibration resistance up to 15g and shock resistance up to 50g, ensuring durability in challenging environments. The memory card is also designed to operate in conditions with up to 95% relative humidity (non-condensing), although it does not specify a control voltage (DC) or supply voltage (AC), indicating its primary function is data storage rather than power-dependent operations.
1 in stock
24 hours
WAGO 793-4504 is a marker card designed for thermal transfer marking with specifications including marking numbers 21 to 30, with 10 numbers marked per strip in a horizontal direction. The marking color is black, and the type is numbers with consecutive numbering differentiation per strip. It comes in a delivery form of a marker card, configured as 10 strips with 10 markers per card. The flammability class per UL94 is V2. The marker or strip width ranges from 4 to 4.2mm, with a specific marker width of 4mm. It features smear resistance according to EN 60998-12004, is white in color, UV resistant as per EN 60068-2-52010 Procedure B, halogen-free, and has a weight of 7.2g with a fire load of 0.215MJ. Classified under Product Group 2 (Terminal Block Accessories), it adheres to eClass 10.0 and 9.0, as well as ETIM 8.0 and 7.0 standards, all under the code EC000761. The product unit comes in packs of 5 pieces, packaged in bags, with the country of origin being Germany (DE). The GTIN is 4055143702256, and the customs tariff number is 49119900000. It is RoHS compliant without any exemptions.
3 in stock
24 hours
Manual Motor Controller 10A, 2 Pole, 277V AC, C Trip, UL508
19 in stock
24 hours
Item | Manufacturer | Price | Stock | Delivery | |
---|---|---|---|---|---|
2004-553 Wago 2004-553 is a modular connector designed for jumper contact slot applications, featuring push-in CAGE CLAMP spring connections. It supports a rated current of 32A and is compatible with 0.5mm2 to 6mm2 stranded conductors, as well as 0.5mm2 to 6mm2 solid conductors, including #20AWG to #10AWG sizes for both stranded or solid types. This connector is part of the TOPJOB S series, constructed from Polyamide (PA) 66, ensuring compatibility with a control voltage that is plug-in. The net height and width are specified for 3-poles (3P) configurations, with a net height corresponding to an IEC rating of 6 kV and a diameter rated at IEC 500 V. The dimensions include a residual current sensitivity of W18.6mm, indicating its physical size and installation requirements. | WAGO | $11.21 | 3 in stock | 24 hours | |
LC1DT25BL Schneider Electric LC1DT25BL is a magnetic contactor within the Deca sub-range, featuring a low-consumption coil that operates below 2.4W. This contactor is designed with screw connections and has a 4-pole (4NO) configuration. It is rated for a current of 25A under AC-1 conditions and is suitable for DIN rail mounting. The LC1DT25BL offers an IP20 degree of protection and operates with a control voltage range of 19.2-30Vdc, with a nominal 24Vdc. Its rated operating voltage (Ue) reaches up to 690 V, and it includes 1 Normally Open (NO) and 1 Normally Closed (NC) auxiliary contacts, both of the instantaneous type (1NO+1NC). The contactor is capable of withstanding rated impulse voltages up to 6 kV and has a mechanical durability of 15 million operations at no load. The rated voltage for phase-to-phase connections is 690 V, and the power consumption is specified at 2.4 W. | Schneider Electric | $166.00 | 1 in stock | 24 hours | |
870-924 Wago 870-924 is an end plate designed for use as both an end and intermediate plate in the X-COM series. It features a rated impulse voltage (Uimp) of 2 mm and is constructed from Polyamide (PA) 66. The part is characterized by its dimensions, H33.4mm x W2mm x D27.5mm, and is presented in orange. | WAGO | $0.59 | 200 in stock | 24 hours | |
857-724 Wago 857-724 is a Solid State Relay (SSR) designed for plug-in input applications. It features push-in CAGE CLAMP spring connections for easy installation and is capable of handling a rated current of 3A continuously, with a maximum inrush current of 15A AC for 10ms. The SSR operates with a rated voltage of 0-30Vdc, nominally at 24Vdc, and is equipped with a pre-assembled socket base. It includes a yellow LED for status indication and supports a 2-wire connection. The device is designed to work within an ambient air temperature range for operation and storage of -20°C to +70°C. It offers a degree of protection rated at IP20 and has a control voltage range of 18.8-31.2Vdc, nominally at 24Vdc. The SSR's dimensions are H94mm x W6mm x D81mm, fitting a DIN-35 rail for mounting, and it features a 6mm width. Its response time is specified as 100μs for switching ON and 600μs for switching OFF, with a network frequency of 350Hz switching frequency. The device is designed to operate in environments with 5-85% relative humidity, without condensation. | WAGO | $49.62 | 1 in stock | 24 hours | |
793-502 Wago 793-502 is a labeled WMB marking card designed for horizontal marking. It features a snap-on control voltage (AC) mechanism and is constructed from halogen-free materials. The card is white in color, has a residual current sensitivity specification, and is designed to accommodate a cross-section with a width of 5mm. | WAGO | $6.23 | 3 in stock | 24 hours | |
793-4569 WAGO 793-4569 is a marker card designed for thermal transfer marking with specifications including marking numbers 51 to 60, with 10 numbers marked horizontally in black. The markers are differentiated by consecutive numbers per strip, delivered in a form of 10 strips with 10 markers per card. The markers have a width of 4 to 4.2mm, with a specific marker width of 4mm, and are smear-resistant as per EN 60998-12004. These markers are white, UV resistant according to EN 60068-2-52010 Procedure B, halogen-free, and have a weight of 7.2g with a fire load of 0.215MJ. Classified under Terminal Block Accessories (Product Group 2), they comply with eClass 10.0 and 9.0, as well as ETIM 8.0 and 7.0 standards, identified as EC000761. Each package contains 5 pieces, packaged in a bag, with the country of origin being Germany (DE). The product's GTIN is 4044918693752, and it has a customs tariff number of 49119900000. It meets RoHS compliance without any exemptions. | WAGO | $6.53 | 6 in stock | 24 hours | |
753-110 Wago 753-110 is a mounting accessory designed to function as a plug. It operates with a supply voltage of 0° AC and is suitable for use in ambient air temperatures ranging from C to +55° for operation and can be stored in temperatures ranging from C to +85°. This part does not specify a speed but offers a degree of protection rated at IP20. It does not utilize a control voltage specified in DC and communicates via a protocol denoted as IP20. The cross-section color is light gray, and its dimensions are W12mm x D74.3mm. | WAGO | $5.29 | 23 in stock | 24 hours | |
758-879/000-001 Wago 758-879/000-001 is a memory card designed specifically for automation applications. This SD memory card operates effectively within an ambient air temperature range for operation of -40°C to +90°C and has the same temperature range for storage. It is characterized by a 2GB (SLC) network frequency and is built to withstand vibration resistance up to 15g and shock resistance up to 50g, ensuring durability in challenging environments. The memory card is also designed to operate in conditions with up to 95% relative humidity (non-condensing), although it does not specify a control voltage (DC) or supply voltage (AC), indicating its primary function is data storage rather than power-dependent operations. | WAGO | $180.73 | 1 in stock | 24 hours | |
793-4504 WAGO 793-4504 is a marker card designed for thermal transfer marking with specifications including marking numbers 21 to 30, with 10 numbers marked per strip in a horizontal direction. The marking color is black, and the type is numbers with consecutive numbering differentiation per strip. It comes in a delivery form of a marker card, configured as 10 strips with 10 markers per card. The flammability class per UL94 is V2. The marker or strip width ranges from 4 to 4.2mm, with a specific marker width of 4mm. It features smear resistance according to EN 60998-12004, is white in color, UV resistant as per EN 60068-2-52010 Procedure B, halogen-free, and has a weight of 7.2g with a fire load of 0.215MJ. Classified under Product Group 2 (Terminal Block Accessories), it adheres to eClass 10.0 and 9.0, as well as ETIM 8.0 and 7.0 standards, all under the code EC000761. The product unit comes in packs of 5 pieces, packaged in bags, with the country of origin being Germany (DE). The GTIN is 4055143702256, and the customs tariff number is 49119900000. It is RoHS compliant without any exemptions. | WAGO | $6.53 | 3 in stock | 24 hours | |
2C10UM Manual Motor Controller 10A, 2 Pole, 277V AC, C Trip, UL508 | Altech Corp. | $49.11 | 19 in stock | 24 hours |