756-1104/060-020 WAGO Cable Assemblies

WAGO 756-1104/060-020 is a PROFIBUS connector with an M12 plug to free end connection type and a 5-pole number. It features a cable connection direction to mating direction of 90 degrees and a B-coded connector interface. The cable length is 2m, operating at a voltage of up to 300V and a current of 4A. It has a rated surge voltage of 2kV and an insulation resistance greater than 2500MΩ. The conductor resistance is specified at 55Ω, with a loop resistance of 110Ω. It is designed for flexible use with a bending radius greater than 10 times the cable diameter and for fixed installation in drag chains with a bending radius greater than 5 times the cable diameter, supporting over 1 million bending cycles. The cable has drag chain capability, with a sheathed diameter of 7.3 to 7.9mm, and is constructed from LI02YS-(ST)CB11Y 1X(2X0.34SQMM) type code with a shielding braid of tinned CU-ETP1 covering approximately 85% +/- 5%. The conductor is made of bare copper wire (19 x 0.15mm) with PE (halogen-free) insulation and PP yarn filler. The housing material is TPU/TPU in black (RAL 9005) color, with a tightening torque of 1Nm and a weight of 140g. The cable is violet, designed to operate in temperatures ranging from -25 to +60°C dynamically and -50 to +60°C statically, with an IP67 protection type and a pollution degree of 3/2 per IEC 60664-1. It complies with RoHS, including an exemption 6(c), and has been notified under SCIP in multiple EU countries. The product is packaged individually in a box, with a country of origin in Germany and a GTIN of 4045454521639.