Powermatic Associates Logo

PILZ-402230 Pilz Control Circuits

PILZ-402230 on Powermatic Associates
Pilz

Part#:PILZ-402230

Manufacturer:Pilz

Product Lifecycle:Active

Get a quick Quote!

Pilz PILZ-402230 is an electronic selector switch featuring an LED status indicator. It operates within an ambient air temperature range of -20 to +60°C and has a net height of 55 mm. Designed with 3 operating modes and a 0x1111 coding type battery-free transponder, it offers both plug-in/detachable spring-loaded and screw terminal connections. This selector switch is IP65 rated for protection and requires a supply voltage of 20.4-26.4Vdc, with a nominal 24Vdc. It operates at a frequency of 125kHz with passive transponder technology. The front housing is made of ABS material, and the bottom is ST/10μ Zn, supporting a maximum cable length of 1000m and a 9mm stripping length for spring-loaded terminal connections. The net width and depth are 98 mm and 43 mm, respectively. It can accommodate wire cross-sections ranging from 0.25 to 1.5mm2 (28AWG to 16AWG) for screw terminal connections and 0.2 to 2.5mm2 (24AWG to 12AWG) for spring-loaded connections. The sensing distance is 5mm. Storage temperature range is -20 to +70°C. It features 13 x positive-switching 1-pole semiconductor outputs with specific voltage and current characteristics, short-circuit protection, and various response times for different operations. The rated impulse voltage is 0.8 kV, with a rated insulation voltage of 60 V. It also includes 3 x digital inputs with specified signal levels and a time delay of 1s after supply voltage application.

About the manufacturer: Pilz is one of the manufacturers that offers Control Circuits that you can order at Powermatic Associates site. We are at the forefront of driving the evolution of industrial automation. Our company ethos is built on dedication and principles, placing a high priority on safety. Over the years, we have been devoted to creating cutting-edge products and solutions tailored to our customers' requirements.

Check out the PILZ-402230 Pilz price in the box on the right side or send a quick quote.

Product condition

New Factory Sealed

New Factory Sealed - New condition, never used, original OEM part with original packaging and factory seal.

PILZ-402230 Description

Pilz PILZ-402230 is an electronic selector switch featuring an LED status indicator. It operates within an ambient air temperature range of -20 to +60°C and has a net height of 55 mm. Designed with 3 operating modes and a 0x1111 coding type battery-free transponder, it offers both plug-in/detachable spring-loaded and screw terminal connections. This selector switch is IP65 rated for protection and requires a supply voltage of 20.4-26.4Vdc, with a nominal 24Vdc. It operates at a frequency of 125kHz with passive transponder technology. The front housing is made of ABS material, and the bottom is ST/10μ Zn, supporting a maximum cable length of 1000m and a 9mm stripping length for spring-loaded terminal connections. The net width and depth are 98 mm and 43 mm, respectively. It can accommodate wire cross-sections ranging from 0.25 to 1.5mm2 (28AWG to 16AWG) for screw terminal connections and 0.2 to 2.5mm2 (24AWG to 12AWG) for spring-loaded connections. The sensing distance is 5mm. Storage temperature range is -20 to +70°C. It features 13 x positive-switching 1-pole semiconductor outputs with specific voltage and current characteristics, short-circuit protection, and various response times for different operations. The rated impulse voltage is 0.8 kV, with a rated insulation voltage of 60 V. It also includes 3 x digital inputs with specified signal levels and a time delay of 1s after supply voltage application.

Manufacturer warranty

Get a quick Quote!

Request a quote, and we will send you price and availability within minutes.

Select Qty:

Average response time: 11 minutes

Worldwide Shipping and Delivery

Secure Payment Processing

Warranty

Responsive Customer Support

Got Questions? We've Got Answers!

Need more details?

Feel free to chat with us

Relevant products

ESV751N04TXC on Powermatic Associates

ESV751N04TXC

Verified stock: 2

Lenze ESV751N04TXC is a Variable Speed/Frequency Drive (VSD/VFD) / Inverter designed for control cabinet or surface/wall mounting. It operates within an ambient air temperature range of -10 to +55 °C, with a derating of 2.5% per °C above +40°C. This model features 1 x analog output (0-10Vdc) at Terminal 5, and its degree of protection is NEMA 4X IP65, with dimensions of H203mm x W160mm x D114mm. It includes 1 x digital output (NPN; 24Vdc / 50mA) at Terminal 14, and its analog inputs consist of 1 x analog input (0-10Vdc) at terminal 5 and 1 x analog input (4-20mA) at terminal 25. Digital inputs include 1 x digital input (PNP/NPN logic) at terminal 1 for START/STOP, and 1 x digital input each at terminals 13A, 13B, 13C, and 13D. Protection functions cover earth fault, phase loss, overvoltage, under voltage, motor stalling, over temperature, motor overload (125% of FLA), and short circuit (SCCR = 200kA at rated voltage). Designed for indoor use only, it has a frame size R1 with natural convection cooling (fan-less). The supply voltage is 400Vac / 480Vac, with a network frequency of 48-62 Hz (input) and 0-500 Hz (output). It does not include a communication interface, has a rated current of 2.4A (400Vac) and 2.1A (480Vac), and operates on a 3-phase network (3P / 3AC). The rated active power is 0.75kW (400-480Vac), and the rated power is 1HP (400-480Vac).

Lenze

I55AE137B1AV11003S on Powermatic Associates

I55AE137B1AV11003S

Verified stock: 60

Lenze I55AE137B1AV11003S is a Variable Speed/Frequency Drive (VSD/VFD) / Inverter within the Drives sub-range, designed for variable speed and frequency control, compact inverter DC-injection braking, brake management for brake control, S-ramps for smooth acceleration and deceleration, flying restart circuit, and PID controller functionality. It features a built-in RFI filter, safe torque off (STO) safety standard, I.O. conformal coating, and dimensions of H155mm x W60mm x D130mm. The communication protocol supported is Modbus RTU, with protection functions including overvoltage category, leakage current, earth fault resistance, and overtemperature of motor. It has a rated current of 2.4A for heavy-duty applications at 230-240Vac, with a supply voltage of 230Vac / 240Vac. The mounting mode is suitable for control cabinet or surface/wall mounting. The ambient air temperature for operation varies with the switching frequency, allowing a maximum of 45°C at 2kHz or 4kHz and 40°C at 8kHz or 16kHz. It has an IP20 degree of protection, operates on a single-phase / 1P network with a frequency of 45-65 Hz (input) and 0-599 Hz (output), and includes 1 x analog output, multiple digital inputs with optional uses, 1 x digital output, and 2 x analog inputs with optional uses. The rated active power is 0.37kW, and the rated power is 1/2HP for heavy-duty applications at 230-240Vac.

Lenze

ESV752N04TXB on Powermatic Associates

ESV752N04TXB

Verified stock: 9

Lenze ESV752N04TXB is a Variable Speed/Frequency Drive (VSD/VFD) / Inverter designed for control cabinet or surface/wall mounting. It operates within an ambient air temperature range of -10 to +55 °C, with a derating of 2.5% per °C above +40°C. This model features 1 analog output (0-10Vdc) at Terminal 5, and its degree of protection is NEMA 1 IP31. The dimensions are H250mm x W130mm x D160mm. It includes 1 digital output (NPN; 24Vdc / 50mA) at Terminal 14, and its analog inputs consist of 1 x analog input (0-10Vdc) at terminal 5 and 1 x analog input (4-20mA) at terminal 25. Digital inputs include 1 x digital input (PNP/NPN logic) at terminal 1 for START/STOP and 4 additional digital inputs at terminals 13A, 13B, 13C, and 13D. Protection functions cover earth fault, phase loss, overvoltage, under voltage, motor stalling, over temperature, motor overload (125% of FLA), and short circuit (SCCR = 200kA at rated voltage). Designed for indoor use only with a frame size H1, it supports a supply voltage of 400Vac / 480Vac and a network frequency of 48-62 Hz (input) and 0-500 Hz (output). This model does not include a communication interface, has a rated current of 16.1A (400Vac) and 14A (480Vac), and is suitable for a 3-phase (3P / 3AC) network. The rated active power is 7.5kW (400-480Vac), and the rated power is 10HP (400-480Vac).

Lenze

ESV371N01SXB on Powermatic Associates

ESV371N01SXB

Verified stock: 6

Lenze ESV371N01SXB is a Variable Speed/Frequency Drive (VSD/VFD) / Inverter designed for control cabinet or surface/wall mounting. It operates within an ambient air temperature range of -10 to +55 °C, with a derating of 2.5% per °C above +40 °C. This model features 1 x analog output (0-10Vdc) at Terminal 5, and its degree of protection is NEMA 1 IP31. The dimensions are H190mm x W99mm x D111mm. It includes 1 x digital output (NPN; 24Vdc / 50mA) at Terminal 14, 1 x analog input (0-10Vdc) at terminal 5, 1 x analog input (4-20mA) at terminal 25, and multiple digital inputs (PNP/NPN logic) at terminals 1 START/STOP, 13A, 13B, 13C, and 13D. Protection functions cover earth fault, phase loss, overvoltage, under voltage, motor stalling, over temperature, motor overload (125% of FLA), and short circuit (SCCR = 200kA at rated voltage). Designed for indoor use only with a frame size G1, it supports a supply voltage of 120Vac / 240Vac and a network frequency of 48-62 Hz (input) and 0-500 Hz (output). This model does not include a communication interface, has a rated current of 2.4A for both 120Vac and 240Vac, operates on a single-phase / 1P network, and offers a rated active power of 0.37kW and rated power of 1/2HP for the same voltage range.

Lenze

What can I help you find today?

Recommended parts

UBC10.241 on Powermatic Associates

UBC10.241

PULS UBC10.241 is an Uninterruptible Power Supply (UPS) control module within the U-series, featuring a built-in battery with a 50% power reserve and a green status LED. This module is housed in aluminium and utilizes spring-clamp connections for installation. It measures W123mm x H124mm x D119mm and operates on a supply voltage range of 22.5Vdc to 30Vdc, with a nominal 24Vdc. The rated current is 10A at 22.5Vdc and can reach up to 15A in buffer mode for less than 5 seconds at full output voltage. It supports DIN rail mounting and can operate in ambient air temperatures ranging from 0 to +40°C. The current consumption is 1.1A at a 24Vdc input, and it is designed for DC networks. Visual position indicators include Ready, Buffering, Inhibit, and Replace Battery. Protection functions include output overvoltage protection with a typical 32Vdc and a maximum of 35Vdc, and overload/short-circuit protection with a minimum of 17.9A and a maximum of 21A at load impedance. It is advised not to use the DC-UPS in parallel to increase output power, but paralleling two units for 1+1 redundancy is possible for higher system reliability. The output voltage is regulated at 22.5Vdc in buffer mode with a 23Vdc turn-ON. The efficiency is rated at 0.978 with a 24Vdc input, and the rated power is 360W at 24Vdc and 240W/360W in buffer mode. Power dissipation/losses are 2.9W with a 24Vdc input at 0A output current and 5.5W at 10A output current. Ripple is maintained at 20mVpp across a frequency range of 20Hz to 20MHz at 50Ω. The electrical durability is rated at 137400 hours at 40°C with a 10A output and 24Vdc input, equivalent to 15 years or 131400 hours at both 40°C with a 5A output and 25°C with a 10A output.

Puls

1