Powermatic Associates Logo

N326MC3 NSK Mechanical Components

N326MC3 on Powermatic Associates
NSK

Part#:N326MC3

Manufacturer:NSK

Product Lifecycle:Active

Get a quick Quote!

130MM Bore; Straight Bore Profile; 280MM Outside Diameter; 58MM Width; Brass Cage Matetrial; RBEC 1 | ISO P0; Single Row; Outer Ring - Both Sides Separable; No Snap Ring; Relubricatable; C3-Loose Internal Clearance; Retainer

About the manufacturer: NSK is one of the manufacturers that offers Mechanical Components that you can order at Powermatic Associates site. NSK embarked on its journey by producing Japan's first bearings in 1916. Since then, it has evolved into a global entity focused on researching, designing, and manufacturing Motion & Control™ solutions crucial for mobility and industrial applications. NSK holds the position of the leading bearing supplier in Japan and ranks as the third largest supplier worldwide by market share. Our innovative products and technologies boost automotive performance and industrial productivity while significantly lowering energy consumption. In the early 1960s, we expanded our horizons beyond Japan, establishing over 200 business locations across 30 countries and forming an extensive network of joint ventures and partnerships worldwide.

Check out the N326MC3 NSK price in the box on the right side or send a quick quote.

Product Details

  • Bore
    5.118 Inch | 130 Millimeter
  • Outside Diameter
    11.024 Inch | 280 Millimeter
  • Width
    2.283 Inch | 58 Millimeter
  • Weight / LBS
    39.352
  • Other Features
    Standard Capacity | 2 Rib Inner Ring | Plain Outer Ring | Medium Series | Cage on Inner Ring OD
  • Inch - Metric
    Metric
  • Relubricatable
    Yes
  • Retainer
    Yes
  • Internal Clearance
    C3-Loose
  • Snap Ring
    No
  • Number of Rows of Rollers
    Single Row
  • Separable
    Outer Ring - Both Sides
  • Precision Class
    RBEC 1 | ISO P0
  • Profile
    Complete with Outer and Inner Ring
  • Rolling Element
    Cylindrical Roller Bearing
  • Bore Profile
    Straight
  • Cage Material
    Brass
  • Weight / Kilogram
    18.7
  • Minimum Buy Quantity
    N/A
  • Brand
    NSK
  • CATEGORY
    Cylindrical Roller Bearings

Product condition

New Factory Sealed

New Factory Sealed - New condition, never used, original OEM part with original packaging and factory seal.

Manufacturer warranty

Get a quick Quote!

Request a quote, and we will send you price and availability within minutes.

Select Qty:

Average response time: 11 minutes

Worldwide Shipping and Delivery

Secure Payment Processing

Warranty

Responsive Customer Support

Got Questions? We've Got Answers!

Need more details?

Feel free to chat with us

What can I help you find today?

Recommended parts

UBC10.241 on Powermatic Associates

UBC10.241

PULS UBC10.241 is an Uninterruptible Power Supply (UPS) control module within the U-series, featuring a built-in battery with a 50% power reserve and a green status LED. This module is housed in aluminium and utilizes spring-clamp connections for installation. It measures W123mm x H124mm x D119mm and operates on a supply voltage range of 22.5Vdc to 30Vdc, with a nominal 24Vdc. The rated current is 10A at 22.5Vdc and can reach up to 15A in buffer mode for less than 5 seconds at full output voltage. It supports DIN rail mounting and can operate in ambient air temperatures ranging from 0 to +40°C. The current consumption is 1.1A at a 24Vdc input, and it is designed for DC networks. Visual position indicators include Ready, Buffering, Inhibit, and Replace Battery. Protection functions include output overvoltage protection with a typical 32Vdc and a maximum of 35Vdc, and overload/short-circuit protection with a minimum of 17.9A and a maximum of 21A at load impedance. It is advised not to use the DC-UPS in parallel to increase output power, but paralleling two units for 1+1 redundancy is possible for higher system reliability. The output voltage is regulated at 22.5Vdc in buffer mode with a 23Vdc turn-ON. The efficiency is rated at 0.978 with a 24Vdc input, and the rated power is 360W at 24Vdc and 240W/360W in buffer mode. Power dissipation/losses are 2.9W with a 24Vdc input at 0A output current and 5.5W at 10A output current. Ripple is maintained at 20mVpp across a frequency range of 20Hz to 20MHz at 50Ω. The electrical durability is rated at 137400 hours at 40°C with a 10A output and 24Vdc input, equivalent to 15 years or 131400 hours at both 40°C with a 5A output and 25°C with a 10A output.

Puls

1

LC1D95M7 on Powermatic Associates

LC1D95M7

Schneider Electric LC1D95M7 is a magnetic contactor from the Deca sub-range, featuring screw connections and three poles (3P; 3NO). It has a rated current of 125A (AC-1) and 95A (440Vac; AC-3), with a mounting mode designed for DIN rail installation. The net width of the contactor is 85 mm, and it offers a degree of protection rated at IP20. The control voltage (AC) ranges from 176-242Vac (220Vac nom.; 50Hz; 0.8...1.1 x Uc) to 187-242Vac (220Vac nom.; 60Hz; 0.85...1.1 x Uc), with a rated operating voltage (Ue) of 1000 V. It includes 1 normally open (NO) auxiliary contact and 1 normally closed (NC) auxiliary contact, both of the instantaneous type (1NO+1NC). The rated impulse voltage (Uimp) is 8 kV. This contactor is capable of handling rated active power ranging from 25kW (220-230Vac; AC-3) to 55kW (500Vac; AC-3), with specific ratings for various voltages up to 1000Vac. It also supports rated power (HP) for motors from 7.5HP (115Vac; single-phase) to 60HP (575-600Vac; 3-phase), under UL/CSA standards. The mechanical durability of the LC1D95M7 is rated at 4,000,000 operations, and its electrical durability (with load) is rated at 1,200,000 operations. The rated voltage (AC) for phase-to-phase connections is 1000 V.

Schneider Electric

17