8083716 Festo Electric Actuators

Product Details

• Rotor position sensor
  Absolute encoder, single-turn
• Max. cable length
  15 m outputs 20 m for IO-Link® operation
• Logic interface, connection pattern
  00992264
• Number of digital logic outputs 24 V DC
  2
• Max. current of digital logic outputs
  100 mA
• Nominal current
  5.3 A
• IO-Link®, number of ports
  1
• IO-Link®, process data width IN
  2 Byte
• Switching logic at outputs
  PNP (positive switching)
• Characteristics of digital logic outputs
  Configurable Not galvanically isolated
• Insulation protection class
  B
• Ready status indication
  LED
• Note on ambient temperature
  Above an ambient temperature of 30°C, the power must be reduced by 2% per K.
• Permissible voltage fluctuations
  +/- 15 %
• Number of digital logic inputs
  2
• Power supply, number of pins/wires
  4
• Additional functions
  User interface Integrated end-position sensing
• Relative air humidity
  0 - 90 %
• Characteristics of logic input
  Configurable Not galvanically isolated
• Rotor position sensor measuring principle
  Magnetic
Power supply, connection pattern
00995989
Logic interface, connection technology
M12x1, A-coded as per EN 61076-2-101
Storage temperature
-20 °C ... 60 °C
KC characters
KC EMC
Vibration resistance
Transport application test with severity level 1 as per FN 942017-4 and EN 60068-2-6
Parameterization interface
IO-Link® User interface
Input switching logic
PNP (positive switching)
Power supply, connection technology
M12x1, T-coded as per EN 61076-2-111
DC nominal voltage
24 V
Max. current consumption
5300 mA
Shock resistance
Shock test with severity level 1 as per FN 942017-5 and EN 60068-2-27
Logic input specification
Based on IEC 61131-2, type 1
Display
LED
Power supply, type of connection
Plug
Logic interface, connection type
Plug
Logic interface, number of poles/wires
8
Work range of logic input
24 V
IO-Link®, protocol version
Device V 1.1
Rotor position sensor resolution
16 bit
IO-Link®, service data contents IN
32 bit force 32 bit speed
IO-Link®, process data width OUT
2 Byte
Reversing backlash
150 µm
Spindle pitch
12 mm/U
Homing
Fixed stop block positive Reference switch
CE marking (see declaration of conformity)
As per EU EMC directive As per EU RoHS directive
Degree of protection
IP40
Max. force Fy
4937 N
Max. torque Mx
20 Nm
Linear guide statistical basic load rating
26900 N
Basic weight with 0 mm stroke
2735 g
Additional moving mass per 10 mm stroke
40 g
Material of yoke plate
Wrought aluminum alloy, anodized
IO-Link®, Connection technology
Plug
IO-Link®, port class
A
IO-Link®, data memory required
500 byte
Mounting position
Any
Design
Electrical mini-slide With integrated drive
Position sensing
Motor encoder For proximity sensor
Max. acceleration
5 m/s²
Certification
RCM compliance mark
Max. torque My
30 Nm
Guide value for payload, horizontal
10 kg
Statistical fixed bearing load rating
7000 N
Product weight
3210 g
Housing material
Wrought aluminum alloy, anodized
IO-Link®, communication mode
COM3 (230.4 kBd)
IO-Link®, minimum cycle time
1 ms
Working stroke
50 mm
Stroke reserve
0 mm
Motor type
Stepper motor
Max. speed
0.24 m/s
Duty cycle
100%
Ambient temperature
0 °C ... 50 °C
Fixed bearing dynamic basic load rating
13321 N
Max. feed force Fx
250 N
Ball screw drive statistical basic load rating
8500 N
Reference value, running performance
5000 km
Note on materials
Contains paint-wetting impairment substances RoHS-compliant
Piston rod material
High-alloy stainless steel
IO-Link®, process data content OUT
1 bit (move in) 1 bit (quit error)
IO-Link®, process data content IN
1 bit (state device) 1 bit (state out)
Size
60
Type code
EGSS
Guide
Recirculating ball bearing guide
Spindle type
Ball screw drive
Corrosion resistance class (CRC)
0 - No corrosion stress
Max. force Fz
4937 N
Max. radial force on actuator shaft
420 N
Feed constant
12 mm/U
Moving mass at 0 mm stroke
675 g
Type of mounting
With internal thread With cylindrical pin
Slide material
Wrought aluminum alloy, anodized
Spindle nut material
Roller bearing steel
Spindle material
Roller bearing steel
Protection class
III
IO-Link®, SIO mode support
Yes
Screw diameter
12 mm
Symbol
00997294
Repetition accuracy
±0.015 mm
Linear guide dynamic basic load rating
13400 N
Dynamic basic load rating, ball screw drive
4600 N
Max. torque Mz
30 Nm
Guide value for payload, vertical
10 kg
Maintenance interval
Life-time lubrication
Additional weight per 10 mm stroke
95 g
Slide carriage material
Roller bearing steel
Guide rail material
Roller bearing steel

Related documents 8083716 Specs