533457 Festo Quarter Turn Actuators

Name: 533457
Brand: Festo

Part#:533457

Manufacturer:Festo

Category:Quarter Turn Actuators

Alt. Part#:DAPS-0480-090-RS3-F1012

Product Lifecycle:Active

Get a quick Quote!

semi-rotary drive DAPS-0480-090-RS3-F1012 Single-acting, air connection as per VDI/VDE 3845, Namur valves can be directly flange-mounted Size of actuator: 0480, Flange hole pattern: (* F10, * F12), Swivel angle: 90 deg, End-position adjustment range at 0°

About the manufacturer: Festo is one of the manufacturers that offers Quarter Turn Actuators that you can order at Powermatic Associates site. Festo Corp. has been a top supplier of automation and intelligent automation solutions for more than four decades in the United States and eight decades globally. The company is committed to transforming the manufacturing sector and enhancing business efficiency.

Check out the 533457 Festo price in the box on the right side or send a quick quote.

Product Details

Mode of operation
Single-acting
Position sensing
None
Shaft connection
T36
Operating pressure
4.2 bar ... 8.4 bar
ATEX category for dust
II 2D
Explosion prevention and protection
Zone 1 (ATEX) Zone 22 (ATEX)
Corrosion resistance class (CRC)
3 - High corrosion stress
Spring return torque with 50° swivel angle
180 Nm
Cover material
Wrought aluminum alloy
Housing material
Wrought aluminum alloy
Type code
DAPS
Depth shaft connection
38.5 mm
Symbol
00991266
Nominal operating pressure
5.6 bar
Explosive ambient temperature
-20°C <= Ta <= +60°C
CE marking (see declaration of conformity)
as per EU explosion protection directive (ATEX)
Torque at nominal operating pressure and 90° swivel angle
440 Nm
Product weight
22700 g
Pneumatic connection
G1/4
Material of screws
High-alloy steel

Flange hole pattern

F10 F12

End-position adjusting range at nominal swivel angle

81 deg ... 91 deg

Standard connection for valve

ISO 5211

Design

Scotch yoke system

Connection pressure for spring force

4.2 bar

Type of ignition protection for gas

Ex h IIC T6...T3 Gb X

Information on operating and pilot media

Operation with oil lubrication possible (required for further use)

Torque at nominal operating pressure and 0° swivel angle

560 Nm

Spring return torque at 0° swivel angle

240 Nm

Spring force

Size of valve actuator

0480

End-position adjusting range at 0°

-1 deg ... 9 deg

Cushioning

No cushioning

Closing direction

Clockwise closing

Safety integrity level (SIL)

Up to SIL 2 high demand mode Up to SIL 2 low demand mode

Type of (ignition) protection for dust

Ex h IIIC T85°C...T200°C Db X

Ambient temperature

-20 °C ... 80 °C

Note about the torque

The actuator's operating torque must not be higher than the maximum permissible torque listed in ISO 5211, based on the size of the mounting flange and the coupling.

Air consumption at 6 bar per cycle 0°-nominal swivel angle-0°

19.6 l

Note on materials

RoHS-compliant

Material number for shaft

1.4305

Swivel angle

90 deg

Information on the end-position adjusting range

One end position optionally adjustable

Mounting position

Any

Valve connection conforms to standard

VDI/VDE 3845 (NAMUR)

ATEX category gas

II 2G

Operating medium

Compressed air as per ISO 8573-1:2010 [7:4:4]

Torque at nominal operating pressure and 50° swivel angle

300 Nm

Spring return torque with 90° swivel angle

360 Nm

Seals material

FPM PUR

Shaft material

High-alloy steel

Product condition

New Factory Sealed

New Factory Sealed - New condition, never used, original OEM part with original packaging and factory seal.

Recommended parts

UBC10.241

PULS UBC10.241 is an Uninterruptible Power Supply (UPS) control module within the U-series, featuring a built-in battery with a 50% power reserve and a green status LED. This module is housed in aluminium and utilizes spring-clamp connections for installation. It measures W123mm x H124mm x D119mm and operates on a supply voltage range of 22.5Vdc to 30Vdc, with a nominal 24Vdc. The rated current is 10A at 22.5Vdc and can reach up to 15A in buffer mode for less than 5 seconds at full output voltage. It supports DIN rail mounting and can operate in ambient air temperatures ranging from 0 to +40°C. The current consumption is 1.1A at a 24Vdc input, and it is designed for DC networks. Visual position indicators include Ready, Buffering, Inhibit, and Replace Battery. Protection functions include output overvoltage protection with a typical 32Vdc and a maximum of 35Vdc, and overload/short-circuit protection with a minimum of 17.9A and a maximum of 21A at load impedance. It is advised not to use the DC-UPS in parallel to increase output power, but paralleling two units for 1+1 redundancy is possible for higher system reliability. The output voltage is regulated at 22.5Vdc in buffer mode with a 23Vdc turn-ON. The efficiency is rated at 0.978 with a 24Vdc input, and the rated power is 360W at 24Vdc and 240W/360W in buffer mode. Power dissipation/losses are 2.9W with a 24Vdc input at 0A output current and 5.5W at 10A output current. Ripple is maintained at 20mVpp across a frequency range of 20Hz to 20MHz at 50Ω. The electrical durability is rated at 137400 hours at 40°C with a 10A output and 24Vdc input, equivalent to 15 years or 131400 hours at both 40°C with a 5A output and 25°C with a 10A output.

Puls

RSC RKC 572-8.2M/TR2

RSC RKC 572-8.2M/TR2 Turck - RSC RKC 572-8.2M/TR2 DeviceNet™ Cordset, Extension Cordset

Turck

CS5.241

PULS CS5.241 AC/DC Power Supply, 5A, 120W, 24DC output, 100-120 VAC input

Puls

DKF 28-27-1

DKF 28-27-1 Turck - DKF 28-27-1 Actuator and Sensor Receptacle, Front Mount

Turck

212

G10S0000

Red Lion G10S0000 is an HMI / Display unit from the HMI Rugged Graphite series designed for both indoor and outdoor use. It features an HMI operator touchscreen panel with a connection interface that includes 1 x RJ45 port for Ethernet, 2 x RJ11 ports for RS-232, and 1 x RJ45 port supporting both RS-422 and RS-485 communication protocols. The unit operates on a supply voltage range of 10-30Vdc, accommodating both 12Vdc and 24Vdc systems. It is engineered to function within an ambient air temperature range of -20 to +60 °C and offers a degree of protection rated at IP66 and NEMA 4X. The G10S0000 is equipped with 7 module slots for connection capacity, and its power consumption is typically 18 W, with a maximum of 53 W. The electrical durability of the backlight is rated at 35,000 hours. For storage, it includes an SD card slot, and it boasts a brightness level of 2500cd/m2.

Red Lion

S29371

Square D by Schneider Electric S29371 is a locking device designed for fixed OFF or ON locking. It functions as a padlocking device, ensuring secure locking capabilities. The dimensions of this part are a net width of 60 mm, a net height of 21 mm, and a net depth of 59 mm.

Schneider Electric