32702 Festo Pneumatic Actuators

Name: 32702
Brand: Festo

Part#:32702

Manufacturer:Festo

Alt. Part#:DPZ-25-40-P-A

Product Lifecycle:Active

Get a quick Quote!

twin-piston cylinder DPZ-25-40-P-A With two parallel piston rods, for proximity sensing, with elastic cushioning rings in end positions. Centre of gravity distance from working load to yoke plate: 0 mm, Stroke: 40 mm, Adjustable end-position range/length:

About the manufacturer: Festo is one of the manufacturers that offers Pneumatic Actuators that you can order at Powermatic Associates site. Festo Corp. has been a top supplier of automation and intelligent automation solutions for more than four decades in the United States and eight decades globally. The company is committed to transforming the manufacturing sector and enhancing business efficiency.

Check out the 32702 Festo price in the box on the right side or send a quick quote.

Product Details

Stroke
40 mm
Type code
DPZ
Guide
Sliding guide
Symbol
00991249
Information on operating and pilot media
Operation with oil lubrication possible (required for further use)
Max. payload as a function of the stroke at defined distance xs
28 N
Alternative connections
See product drawing
Piston rod material
High-alloy stainless steel
Distance of centre of gravity of payload to yoke plate xs
0 mm
Piston diameter
25 mm
Mounting position
Any
Position sensing
For proximity sensor
Operating medium
Compressed air as per ISO 8573-1:2010 [7:4:4]
Ambient temperature
-20 °C ... 80 °C
Impact energy in the end positions
0.3 J
Housing material
Wrought aluminum alloy
Adjustable end position range/length
10 mm
Drive unit operating mode
Yoke
Mode of operation
Double-acting
Theoretical force at 6 bar, retracting
452 N

Cover material

Wrought aluminum alloy

Design

Guide

Corrosion resistance class (CRC)

2 - Moderate corrosion stress

Pneumatic connection

Cushioning

Elastic cushioning rings/pads at both ends

Operating pressure

0.1 MPa ... 1 MPa

Theoretical force at 6 bar, advancing

590 N

Seals material

NBR

Product condition

New Factory Sealed

New Factory Sealed - New condition, never used, original OEM part with original packaging and factory seal.

Recommended parts

M9F43303

Schneider Electric M9F43303 is a Miniature Circuit Breaker (MCB) within the C60BP sub-range, designed with a 3-pole configuration. It has a rated current of 3A and features a rated insulation voltage (Ui) of 500V. This MCB operates with a rated voltage of 60Vdc and has a rated impulse voltage (Uimp) of 6kV. It offers a short circuit breaking rating of 14kA AIR at both 120Vac and 240Vac, and 10kA AIR at 480Y/277Vac and 60Vdc. The rated voltage for AC applications is 240V phase-to-neutral and 415V phase-to-phase. All three poles are protected, and it is equipped with a D tripping curve.

Schneider Electric

EL6910

EtherCAT Terminal communication interface, TwinSAFE Logic

Beckhoff

KG5067

Capacitive sensor, Reliable level detection of conductive media, Electrical design: PNP/NPN; (Automatic load detection PNP/NPN), Output function: normally open / closed; (selectable), Sensing range [mm]: 8, Communication interface: IO-Link, Housing: Threa

ifm Electronic

224

SSM1A130BD

Schneider Electric SSM1A130BD is a solid state relay (SSR) within the SSM sub-range, designed to facilitate solid state/static relay functions. It operates with a control voltage (DC) range of 4-32 Vdc and can handle a rated current of 30 A. The relay is suitable for applications requiring a rated voltage (AC) from phase-to-neutral within the range of 24-280 V.

Schneider Electric

LC1D95M7

Schneider Electric LC1D95M7 is a magnetic contactor from the Deca sub-range, featuring screw connections and three poles (3P; 3NO). It has a rated current of 125A (AC-1) and 95A (440Vac; AC-3), with a mounting mode designed for DIN rail installation. The net width of the contactor is 85 mm, and it offers a degree of protection rated at IP20. The control voltage (AC) ranges from 176-242Vac (220Vac nom.; 50Hz; 0.8...1.1 x Uc) to 187-242Vac (220Vac nom.; 60Hz; 0.85...1.1 x Uc), with a rated operating voltage (Ue) of 1000 V. It includes 1 normally open (NO) auxiliary contact and 1 normally closed (NC) auxiliary contact, both of the instantaneous type (1NO+1NC). The rated impulse voltage (Uimp) is 8 kV. This contactor is capable of handling rated active power ranging from 25kW (220-230Vac; AC-3) to 55kW (500Vac; AC-3), with specific ratings for various voltages up to 1000Vac. It also supports rated power (HP) for motors from 7.5HP (115Vac; single-phase) to 60HP (575-600Vac; 3-phase), under UL/CSA standards. The mechanical durability of the LC1D95M7 is rated at 4,000,000 operations, and its electrical durability (with load) is rated at 1,200,000 operations. The rated voltage (AC) for phase-to-phase connections is 1000 V.

Schneider Electric