RFID Systems - Turck

Accessories, Arm Bracket, , Mounting bracket for UHF RFID read/write heads TNxxx-Q175L200-H1147 and TNxxx-Q120L130-H1147

Accessories, Mounting Flange, , Using the mounting flange, it is possible to mount the tag TW-R50-M-B128 (-K2) on or in metal with 2 screws

UHF Tag, , EEPROM, memory 112 byte, TID memory: 12 byte, For direct mounting on metal

HF Read/Write Head, IO-Link, Non-flush, Rectangular, height 40 mm, The active face (yellow) can be positioned in five different orientations without the need for tools (quick toggle catch), Plastic, PBT-GF30-V0, Process value in 32-byte IO-Link telegram, Operation in SIO mode possible, RSSI value output, Alarm outputs, parameterizable (e.g. for RSSI threshold), Password function for accessing the tag (separate hardware must be used to enable the password function), Operating hours counter, Male

HF Read/Write Head, Non-flush, Rectangular, 370x350 mm, height 20 mm, Active face on top, Plastic, PBT-GF30-VO

HF Tag, , FRAM memory 9 kB, Not for direct mounting on metal

HF Tag, , The tags must undergo adequate stress tests within the proposed temperature processes before deployment., The following stress test was performed on this tag:Cyclic temperature stress: 5 min at -40 °C – 5 min at 90 °CNumber of tested cycles: 100, transition period: 30 secondsContinuous load: 140 °C for 100 hours, This successfully performed test does not imply suitability for a specific application, but merely serves as proof of the basic usability., EEPROM, memory 128 byte, Not for

HF Read/Write Head, For Bus Line Topology with TBEN-*, Non-flush, Rectangular, height 14 mm, Active face on top, Plastic, PBT-GF30-VO, Device without end termination, Device may only be operated in line topology TBEN-S*-2RFID-* or TBEN-L*-4RFID-*, Max. 32 nodes per line or connection permitted, Use a corresponding terminating resistor (see accessories), Observe the performance of the power supply, especially when turned on, and the maximum current carrying capacity of the cables, Observe the vol

HF Tag, , M10 bolt tag with yellow cap, EEPROM, memory 128 byte, Tighten by hand only, max. 0.56 Nm

HF Read/Write Head, Stainless Steel, Flush, Threaded barrel, M18 x 1, Stainless steel, 1.4404, Front cap made of liquid crystal polymer, High protection class IP69K, for harsh environments, Special double-lip seal, Protection against all common acid and alkaline cleaning agents, For the food industry, Laser engraved label, permanently legible