Magnetic Field Sensors - Turck

Magnetic Field Sensor, For Pneumatic Cylinders, Cable length (L) 2 m, Plastic, PA12-GF30, Magnetic-inductive sensor, DC 2-wire, nom. 8.2 VDC, Output acc. to DIN EN 60947-5-6 (NAMUR), Cable connection, ATEX category II 2 G, Ex zone 1, ATEX category II 1 D, Ex zone 20, SIL2 (Low Demand Mode) acc. to IEC 61508, PL c acc. to ISO 13849-1 at HFT0, SIL3 (All Demand Mode) acc. to IEC 61508, PL e acc. to ISO 13849-1 with redundant configuration HFT1

Turck BIM-QST-Y1X is an intrinsically-safe magnetic cylinder position sensor or switch, belonging to the BIM-QST series. It features an ATEX compliant embeddable design suitable for hazardous environments. The sensor operates with a supply voltage of 8.2Vdc and is constructed with a PA12-GF30 (glass fiber reinforced Polyamide) housing and sensing face, along with a PVC cable jacket. It is connected via a pre-wired 2m / 6.5ft cable that terminates with bare end flying leads. The sensor has a rectangular body shape and offers a degree of protection rated at IP67, making it resistant to dust and water ingress. It can operate within an ambient air temperature range of -25°C to +70°C and has a maximum switching frequency of 1kHz (1000Hz). The BIM-QST-Y1X is equipped with one digital output (8.2Vdc; NAMUR).

Magnetic Field Sensor, For Pneumatic Cylinders, , Rectangular, height 18.5 mm, Front active face, Metal/plastic, Al/PA12-GF30, Magnetic-inductive sensor, DC 3‐wire, 10…30 VDC, NO contact, PNP output, Male connector, M8 x 1

Magnetic Field Sensor, For Pneumatic Cylinders, Cable length (L) 2 m, For T-groove cylinders without mounting accessories, Optional accessories for mounting on other cylinder designs, One-hand mounting possible, Stable mounting, Magneto-resistive sensor, DC 3‐wire, 10…30 VDC, NO contact, PNP output, Cable connection, ATEX category II 3 G, Ex zone 2, ATEX category II 3 D, Ex zone 22

Magnetic Field Sensor, For Pneumatic Cylinders, Cable length (L) 2 m, For T-groove cylinders without mounting accessories, Optional accessories for mounting on other cylinder designs, One-hand mounting possible, Stable mounting, Magneto-resistive sensor, DC 3‐wire, 10…30 VDC, NC contact, PNP output, Cable connection

Magnetic Field Sensor, For Pneumatic Cylinders, Cable length (L) 2 m, Rectangular, height 15mm, Concentric active face, Plastic, PA12-GF30, Magnetic-inductive sensor, DC 2‐wire, 10…65 VDC, NO contact, Cable connection

Magnetic Field Sensor, For Pneumatic Cylinders, Cable length (L) 2 m, Rectangular, height 6mm, Plastic, PA12, Magnetic-inductive sensor, DC 2-wire, nom. 8.2 VDC, Output acc. to DIN EN 60947-5-6 (NAMUR), Cable connection, ATEX category II 1 G, Ex zone 0, ATEX category II 1 D, Ex zone 20, SIL2 (Low Demand Mode) acc. to IEC 61508, PL c acc. to ISO 13849-1 at HFT0, SIL3 (All Demand Mode) acc. to IEC 61508, PL e acc. to ISO 13849-1 with redundant configuration HFT1

Magnetic Field Sensor, For Pneumatic Cylinders, Cable length (L) 2 m, Rectangular, height 16 mm, Active face in front, Plastic, PA12‐GF30, Magnetic-inductive sensor, DC 3-wire, 10…30 VDC, NC contact, NPN output, Cable connection

Magnetic Field Sensor, For Pneumatic Cylinders, Cable length (L) 2 m, Rectangular, height 18.5 mm, Front active face, Metal/plastic, Al/PA12-GF30, Magnetic-inductive sensor, DC 3‐wire, 10…30 VDC, NO contact, PNP output, Cable connection

Magnetic Field Sensor, For Pneumatic Cylinders, Cable length (L) 2 m, Rectangular, height 18.5 mm, Front active face, Metal/plastic, Al/PA12-GF30, Magnetic-inductive sensor, DC 3‐wire, 10…30 VDC, NO contact, NPN output, Cable connection