Electronic Components - Schneider Electric

NEMA Motor Starter, Type S, nonreversing, Size 0, 18A, 5 HP at 460 VAC, up to 100 kA SCCR, 3 phase, 3 pole, Motor Logic, 120 VAC coil, open

Duplex Manual Starter-SS Flush-2P Starter-Toggle-1 Selector-Red Indicator-277VAC

Square D by Schneider Electric 1006385B is a load center designed for surface mounting, featuring a meter socket without bypass and equipped with 4 x jaws without jaw release. The enclosure is made of steel, ensuring durability. It utilizes lugs (0.5" hex) for connection, compatible with 8AWG to 2/0AWG aluminium/copper lugs for both line and ground connections. This load center is rated for 600Vac and operates within a single-phase (1PH-3W) network. It is protected by a NEMA 3R enclosure, suitable for outdoor use where protection against weather and water is necessary.

NEMA Combination Starter, Type S, HHL electronic motor circuit protector, Size 3, 90A, 3 phase, 480 VAC coil, NEMA 4X

empty control station - XAP-L - plastic - 10 A - 600VAC

Schneider Electric XAPM2502 is a control station that falls under the XAP sub-range. This part is a die-cast empty control station featuring 2 cut-outs, with one vertical and two horizontal openings. It is constructed from a zinc alloy and has a rectangular shape. The XAPM2502 offers a high degree of protection with ratings of IP69, IP65, and IP69K, making it suitable for various environmental conditions. It is designed for flush mounting and requires a mounting hole diameter of 22 mm. The dimensions of this control station are 130 mm in height, 77 mm in depth, and 80 mm in width. It can be stored and operated in ambient air temperatures ranging from -40 to +70 degrees Celsius.

Schneider Electric VW3A9508 is a mounting accessory designed for mounting the drive power section outside of an enclosure, ensuring it remains dust and damp proof. It includes a flush mounting kit to facilitate installation.

Schneider Electric XAPM3204 is a control station that falls under the XAP sub-range. This part is a die-cast empty control station featuring 4 cut-outs, with configurations allowing for 1 vertical and 4 horizontal openings. It is constructed from a zinc alloy and has a rectangular shape. The XAPM3204 offers a degree of protection rated at IP69, IP65, and IP69K. It is designed for flush mounting, with a mounting hole diameter of 22 mm. The dimensions include a net height of 175 mm, a net depth of 51.5 mm, and a net width of 80 mm. This control station is suitable for use in ambient air temperatures ranging from -40 to +70 degrees Celsius for both operation and storage.

Schneider Electric XAPM44 is a die-cast empty control station from the XAP sub-range, designed without an opening and constructed from zinc alloy. This square-shaped control station offers a high degree of protection with ratings of IP69, IP65, and IP69K, ensuring its suitability for various environmental conditions. It is intended for flush mounting and measures 220 mm in height, 77.3 mm in depth, and 80 mm in width. The XAPM44 can withstand ambient air temperatures for storage ranging from -40 to +70 °C, with operational temperature limits also set between -40 °C and 70 °C.

Schneider Electric XB5AP61 is a push-button designed for various automation applications, falling under the XB5 sub-range. This model features a clear silicone booted projecting push-button with a plastic body and bezel. It has a round shape and offers a degree of protection rated at IP66, making it suitable for environments where dust and water resistance are necessary. The push-button has a diameter of 22 mm and includes 1 Normally Open (NO) auxiliary contact. It utilizes screw-clamp type terminals for connections and operates on a spring-return (impulse/momentary) mechanism.