RFID Systems on Powermatic Associates

HF Tag, , 3 different mounting options in/on metal, incl. accessories, EEPROM, memory 128 byte, For direct mounting on and in metal

Handheld with Lithium-Ion Battery, , Mobile reading and writing of RFID tags, Approved for use in China, Handheld with UHF antenna, Connection to the host device via 3.5 mm jack plug, Incl. TURCK RFID app (iOS, Android) for reading and writing of data carriers, Custom app on request, WLAN and mobile interface via connected host device, Permanent lithium-ion 1800 mAh battery, approx. 2 hours’ active scanning, Incl. Micro-B USB cable and power supply, Protection class IP20, Withstands multiple dro

Accessories, protective frame, , Protective frame (L-profile)

HF Read/Write Head, Non-flush, For roller conveyors, The approach direction of the tag can be both, diagonal as well as longitudinal to the read/write head., Rectangular, 80 x 400 mm, height 25 mm, Active face on top, Plastic, PBT-GF30-VO

UHF Tag, , The high-temperature tags must undergo adequate stress tests within the proposed temperature processes before deployment. Otherwise, their durability cannot be guaranteed when exposed to temperatures outside the denoted range., EEPROM, memory 40 byte, TID serial number: 6 byte, For direct mounting on metal

HF Read/Write Head, For Explosion Hazardous Areas or Areas with Extreme Requirements (e.g. Food Industry), Operating voltage 10…30 VDC, Flush, M30 × 1.5 threaded tube, Stainless steel 1.4404, Front cap made of liquid crystal polymer, High protection class IP69K for harsh environments, Special double-lip seal, Protection against all common acidic and alkaline cleaning agents, Suitable for applications in the food industry, Laser-engraved label, permanently legible, Powered and operated only via c

HF Read/Write Head, For Bus Line Topology with TBEN-*, Operating voltage 10…30 VDC, Flush, M12 × 1 threaded barrel, Chrome-plated brass, Device without end termination, Device may only be operated in line topology TBEN-S*-2RFID-* or TBEN-L*-4RFID-*, Max. 32 nodes per line or connection permitted, Use a corresponding terminating resistor (see accessories), Observe the performance of the power supply, especially when turned on, and the maximum current carrying capacity of the cables, Observe the v

HF Read/Write Head, For Explosion Hazardous Areas or Areas with Extreme Requirements (e.g. Food Industry) and Bus Line Topology with TBEN-*, Operating voltage 10…30 VDC, Non-flush, Threaded barrel, M18 x 1, Stainless steel, 1.4404, Front cap made of liquid crystal polymer, High protection class IP69K, for harsh environments, Special double-lip seal, Protection against all common acid and alkaline cleaning agents, For the food industry, Laser engraved label, permanently legible, Device without en

HF Tag, , The tags must undergo adequate stress tests within the proposed temperature processes before deployment., The following stress test was performed on this tag:Cyclic temperature stress: 5 min at -40 °C – 5 min at 90 °CNumber of tested cycles: 100, transition period: 30 secondsContinuous load: 140 °C for 100 hours, This successfully performed test does not imply suitability for a specific application, but merely serves as proof of the basic usability., EEPROM, memory 128 byte, Not for

HF Tag, , M10 bolt tag with yellow cap, FRAM memory 2 kB, Minimum 300 mounting cycles at 23 Nm, Not compatible with pneumatic impact tools