Lapp - 302003

Schneider Electric LV426801 is a coil designed for undervoltage release and tripping functions, compatible with both AC and DC control voltages. For DC, it operates at 24Vdc and instantaneously opens the circuit breaker when the undervoltage trip supply voltage falls to between 35% and 70% of its rated control voltage, allowing closing when the supply voltage reaches 85% of the rated control voltage. Similarly, for AC, it functions at 24Vac under the same conditions for opening and closing the circuit breaker based on the supply voltage's percentage of the rated control voltage.

Wago 2202-1203 is a feed-through terminal block featuring push-in CAGE CLAMP spring connections. It supports a variety of rated currents including 24A (IEC), 32A (IEC), 20A (UL), 20A (CSA), 22A (Ex e II), and 20A (Ex e II with jumper). This 1-deck terminal block is designed with side and center marking slots, a test port, and is suitable for Ex e II applications. It has a net height of 8 kV for the rated impulse voltage (Uimp) and a net width accommodating 1 feed-through pole (1P). The terminal block is mountable on a DIN-35 rail and features a red and orange actuator. Its dimensions are H48.5mm x W5.2mm x D32.9mm, and it is compatible with 0.25mm2 to 4mm2 fine stranded or solid conductors, as well as #22AWG to #12AWG fine stranded or solid conductors, with a 2.5mm2 nominal cross-section. The terminal block is made from Polyamide (PA) 66, includes 2-wires (1 push-in + 1 push-in) for normally closed (NC) auxiliary contacts, and operates at a diameter of 800 V (IEC), 600 V (UL/CSA), and 550 V (Ex e II). It is part of the TOPJOB S series.

Schneider Electric M9F42215 is a Miniature Circuit Breaker (MCB) within the C60BP sub-range, designed with a 2-pole configuration. It has a rated current of 15A and features a rated insulation voltage (Ui) of 500V. This MCB operates with a rated voltage of 60Vdc and has a rated impulse voltage (Uimp) of 6kV. It offers a short circuit breaking rating of 14kA AIR at both 120Vac and 240Vac, and 10kA AIR at 480Y/277Vac and 60Vdc. The rated voltage for AC applications is 240V phase-to-neutral and 415V phase-to-phase. Both poles are protected, and it utilizes a C tripping curve.

Ferrule 18 AWG HI-1/12 0.24 in. 0.47 in. 0.24 in. L x 0.07 in. Dia.

Wago 2002-1205 is a feed-through terminal block designed for push-in CAGE CLAMP spring connections. It supports a variety of rated currents including 24A (IEC), 32A (IEC), 20A (UL), 20A (CSA), 22A (Ex e II), and 20A (Ex e II with jumper). This 1-deck terminal block features side and center marking slots and is suitable for Ex e II applications. It has a net height of 8 kV for impulse voltage, with dimensions of H48.5mm x W5.2mm x D32.9mm, and accommodates 0.25mm2 to 4mm2 fine stranded or solid conductors, as well as #22AWG to #12AWG fine stranded or solid conductors, with a 2.5mm2 nominal cross-section. The terminal block is made from Polyamide (PA) 66, includes 2-wires for normally closed (NC) auxiliary contacts (1 push-in + 1 push-in) (1+1), and is designed for a 1 feed-through pole (1P). It operates at a rated voltage of 800 V (IEC), 600 V (UL/CSA), and 550 V (Ex e II), and is compatible with DIN-35 rail mounting (35 x 15 / 35 x 7.5). The product is part of the TOPJOB S series and comes in black.

Wago 2006-1671 is a feed-through terminal block designed for efficient wire connection and distribution. It features push-in CAGE CLAMP spring connections for easy wire installation and a 1-deck design with a test point for convenient access. This terminal block is rated for a current of 30A across IEC, UL, and CSA standards, and it supports a voltage rating of 800V (IEC) and 600V (UL/CSA). The terminal is compatible with 0.5mm² to 10mm² fine stranded or solid conductors and #20AWG to #8AWG fine stranded or solid conductors, with a nominal cross-section of 6mm². It is designed to mount on a DIN-35 rail and has dimensions of H96.3mm x W7.5mm x D36.8mm. The terminal block is made from Polyamide (PA) 66, ensuring durability, and it accommodates 2-wires with push-in connections. The color of the terminal block is gray, and it is part of the TOPJOB S series, indicating its suitability for a wide range of applications in automation and control systems.

Schneider Electric - DFCC2

WAGO 857-181 is an optocoupler and solid state relay designed for signal processing networks, not supplied by low-voltage power supply networks. It features a nominal input voltage of DC 24V (SELV) with input voltage ranges of DC 0...4V (low level) and DC 16.8...30V (high level), and a nominal input current at UN of 7mA. The load circuit supports a 2-wire connection, limiting continuous current of 8A, nominal output voltage of DC 24V (SELV), and an output voltage range of DC 1...30V. It has a maximum voltage drop at output of ≤ DC 0.8V, leakage current at rated voltage of ≤ 1 µA, minimum switching current of 10mA, turn-on time of ≤ 60µs, turn-off time of ≤ 250µs, and a switching frequency of ≤ 500 Hz. The dielectric strength between control and load circuit is 3.51kVrms. Physically, it measures 5mm in width, 15mm in height from the surface, and 28mm in depth, with a weight of 3.6g. It is designed for pluggable module mounting. The operating ambient temperature ranges from -30 to +80°C, with storage temperatures from -40 to +100°C, and can operate up to an altitude of 2000m without condensation at a relative humidity of 5...95%. It is RoHS compliant, packaged in boxes of 20 pieces, has a GTIN of 4055143724319, and a customs tariff number of 85365005000. The country of origin is DE.

Square D by Schneider Electric HDF36070 is a Moulded Case Circuit Breaker (MCCB) within the PowerPacT HDF sub-range, designed as a PowerPact H-Frame 150 TMD 3P 70A 600Vac/250Vdc with a 14kA busbar rated at 80%. It features a Term. nut kit for fixed busbar connection on both line and load sides, with three poles (3P). This MCCB offers thermal protection for overload and magnetic protection for short-circuit scenarios. It has a rated current of 70A, a rated insulation voltage (Ui) of 750 V, and operates at rated voltages of 600Vac 600Y/347Vac and 250Vdc. The unit is designed for individual mount on plate, with dimensions of 163 mm in height, 104 mm in width, and 86 mm in depth. It provides an IP40 degree of protection and operates via a toggle (manual) mode. Protection settings include over-current fixed at 70A, short-circuit hold current fixed at 800A, and short-circuit trip current fixed at 1450A. The rated operating voltage (Ue) is 690 V, with a rated impulse voltage (Uimp) of 8 kV. The trip current rating is 70 AT, with a frame current rating of 150 AF. Its short circuit breaking rating varies with voltage, including 25kA at 240Vac, 18kA at 480Vac and 480Y/277Vac, 14kA at 600Vac and 600Y/347Vac, and 20kA at 250Vdc, all according to UL489 standards. The trip unit type is thermal-magnetic (fixed) with no display, and it falls under utilisation category A.