Name: USTS51C
Brand: Schneider Electric

BMI0703P02F

$2,005.20

Schneider Electric BMI0703P02F is an AC servo motor within the Servo motors sub-range, featuring an integrated servo drive and motor. It is designed with an absolute multi-turn 128ppr SinCos encoder, a smooth shaft, a holding brake, and triple (3) motor stacks. The servo motor operates on a supply voltage of 208Vac-480Vac, including specific ratings at 220Vac, 240Vac, and 400Vac. It offers a degree of protection rated at IP54 and IP65, with a rated current of 2.1A at 1600rpm and 208Vac, 1.87A at 3300rpm and 400Vac, and 1.71A at 3800rpm and 480Vac. The mounting mode is a 70x70mm flange, and it uses the HIPERFACE communication protocol. The net width of the motor is 70 mm. Its rotational speed varies with supply voltage, achieving 1600rpm at 208Vac, 3300rpm at 400Vac, and 3800rpm at 480Vac. The rated active power is 0.49kW / 490W at 1600rpm and 208Vac, 0.89kW / 890W at 3300rpm and 400Vac, and 0.94kW / 940W at 3800rpm and 480Vac. The maximum torque is 8.06Nm, with a stall torque of 2.96Nm, and operational torques of 2.93Nm at 1600rpm and 208Vac, 2.58Nm at 3300rpm and 400Vac, and 2.35Nm at 3800rpm and 480Vac. The moment of inertia is 1.78kg.cm.

Schneider Electric

LC1DT206BL

$133.00

Verified stock: 3

Schneider Electric LC1DT206BL is a magnetic contactor from the Deca sub-range, designed with a low-consumption coil that uses less than 2.4W of power. It features ring-lugs connections and is equipped with 4 poles (4NO) for comprehensive circuit control. This contactor is rated for a current of 20A under AC-1 conditions and can be mounted on a DIN rail for easy installation. With a net width of 45 mm and an IP20 degree of protection, it ensures a compact and secure setup. The control voltage ranges from 19.2 to 30Vdc, with a nominal 24Vdc, allowing for flexible operation within 0.8 to 1.25 times the control voltage (Uc). It includes 1 Normally Open (NO) and 1 Normally Closed (NC) auxiliary contacts, both designed for instantaneous operation. The LC1DT206BL boasts a mechanical durability of 15 million operations at no load and can handle rated impulse voltages up to 6 kV. It supports a phase-to-phase rated voltage up to 690 V AC, ensuring compatibility with a wide range of electrical systems.

Schneider Electric

ATV340D15N4

Verified stock: 3

Schneider Electric ATV340D15N4 is a Variable Speed/Frequency Drive (VSD/VFD) / Inverter from the Altivar Machine 340 series. It features Safe Torque Off up to SIL3 / PLe with dual input, 5 points U/F, sensorless and current vector control with or without sensor, and Master/Slave daisy chain through PTO/PTI. It is integrated with MachineStruxure in SoMachine, operates in velocity mode and torque control, and offers 220% Tn in open or closed loop control. The drive provides dynamic motor control performance with up to 400Hz speed bandwidth and supports cyclic application tasks with 1ms. It includes an energy-saving mode, built-in EMC filter (class C3), and built-in heatsink. The supply voltage ranges from 323-528Vac, with dimensions of H385mm x W180mm x D249mm, and an IP20 degree of protection. Rated current is 39A for normal-duty and 32A for heavy-duty at 4kHz, with maximum currents of 53A (normal-duty) and 58A (heavy-duty) for 2s, and 42.9A (normal-duty) and 48A (heavy-duty) for 60s. It supports cabinet mounting, uses Modbus for communication, operates on a 3-phase network with an output frequency of 1-599 Hz, and includes 1 analog output, 5+1 digital inputs, 2 digital outputs programmable as inputs or outputs, 1 digital output with C/O SPDT relay contact, and 1 digital output with NO relay contact. It also features 2 analog inputs and has a current consumption of 42.3A to 44.9A depending on the mode and voltage, with a rated active power of 18.5kW for normal-duty and 15kW for heavy-duty, equivalent to 25HP and 20HP respectively.

Schneider Electric

LC1DT20BL

$133.00

Verified stock: 2

Schneider Electric LC1DT20BL is a magnetic contactor from the Deca sub-range, designed with a low-consumption coil that uses less than 2.4W. It features screw connections for secure installation and operates with 4 poles (4NO) capable of handling a rated current of 20A under AC-1 conditions. This contactor is designed for DIN rail mounting, ensuring a compact and efficient setup with a net width of 45 mm. It offers a degree of protection rated at IP20 and operates with a control voltage range of 19.2-30Vdc, nominally at 24Vdc, which is 0.8 to 1.25 times the control voltage (Uc). The LC1DT20BL can handle a rated operating voltage (Ue) up to 690 V and is equipped with 1 Normally Open (NO) and 1 Normally Closed (NC) auxiliary contacts, both rated for instantaneous operation. The contacts are designed to withstand a rated impulse voltage (Uimp) of 6 kV. With mechanical durability rated at 15 million operations at no load, this contactor is built for longevity. It supports a phase-to-phase rated voltage (AC) of 690 V and maintains a power consumption of 2.4 W.

Schneider Electric

MH31002P12F2200

Verified stock: 0

Schneider Electric MH31002P12F2200 is an AC servo motor characterized by a 100x100mm flange mounting mode and operates within an ambient air temperature range of -20 to +40°C. It features an absolute multi-turn 128ppr SinCos encoder, a parallel key shaft with a holding brake, and double motor stacks designed for optimized torque and speed of rotation with medium inertia. The connection is facilitated by a rotatable right-angled connector, and it supports a wide supply voltage range from 115Vac to 480Vac, including specific voltages such as 120Vac, 200Vac, 208Vac, 220Vac, 230Vac, 240Vac, 380Vac, 400Vac, 415Vac, and 440Vac. This servo motor, part of the Servo motors sub-range, offers a degree of protection rated at IP65 and utilizes the HIPERFACE communication protocol. It achieves a rotational speed of 4000rpm, a stall torque of 6Nm, and is rated at 1.2kW or 1200W of active power, equivalent to 2.7HP. The moment of inertia is specified as 6.4kg.cm2, with a nominal torque of 4.2Nm and a maximum torque capacity of 18Nm.

Schneider Electric

LC1D256BL

$189.00

Verified stock: 19

Schneider Electric LC1D256BL is a magnetic contactor from the Deca sub-range, designed with a low-consumption coil that uses less than 2.4W. It features ring-lugs connections and is equipped with 3 poles (3P; 3NO), supporting a rated current of 40A for AC-1 and 25A for 440Vac in AC-3. This contactor is suitable for DIN rail mounting and has a net width of 45 mm. It offers a degree of protection rated at IP20 and operates with a control voltage (DC) range of 19.2-30Vdc, with a nominal 24Vdc. The rated operating voltage (Ue) is up to 690 V, and it includes 1 normally open (NO) auxiliary contact. The rated impulse voltage (Uimp) is 6 kV. Its rated active power capacity spans from 5.5kW at 220-230Vac to 15kW at 660-690Vac in AC-3. Additionally, it has 1 normally closed (NC) auxiliary contact with a contacts type of 1NO+1NC instantaneous aux. The rated power in horsepower (HP) ranges from 2HP at 115Vac to 20HP at 575-600Vac, under UL/CSA standards for both single-phase and 3-phase systems. The mechanical durability of the LC1D256BL is rated at 15 million operations at no load, and its electrical durability with load is 1.6 million operations. The rated voltage (AC) phase-to-phase is 690 V, with a power consumption of 2.4 W.

Schneider Electric

ATV320U07N4C

$421.00

Verified stock: 1

Schneider Electric ATV320U07N4C is a Variable Speed/Frequency Drive (VSD/VFD) / Inverter from the Altivar Machine 320 series. It features a range of functions including STO (Safe Torque Off up to SIL3 / PLe), SS1 (Safe Stop 1), SLS (Safely Limited Speed), SMS (Safe maximum speed), GDL (Guard door locking), and U/F ratio adjustments (2 points / 5 points / energy saving / quadratic). It offers sensorless flux vector control in standard or energy-saving modes and integrates with MachineStruxure in SoMachine. The drive allows operation in velocity mode and torque control with current limitation, and supports customizable application functions with ATV Logic, allowing up to 50 function blocks. It is designed with a built-in EMC filter, a compact control block, and is ATEX compliant. The supply voltage ranges from 323-550Vac, with dimensions of H143mm x W105mm x D158mm, and an IP20 degree of protection. It has a rated current of 2.3A at 4kHz and a maximum current of 3.5A for 60 seconds. Suitable for cabinet mounting, it uses Modbus and CANopen communication protocols, operates on a 3-phase network with an output frequency of 1-599 Hz, and includes 1 analog output, 4 digital inputs plus additional specialized inputs, 2 digital outputs, and 3 analog inputs. The current consumption is 3.6A at 380Vac and 2.8A at 500Vac, with a rated active power of 750W / 0.75kW, rated power of 1HP, and power dissipation/losses of 38 W.

Schneider Electric

ATV340D22N4E

$3,608.25

Verified stock: 5

Schneider Electric ATV340D22N4E is a Variable Speed/Frequency Drive (VSD/VFD) / Inverter from the Altivar Machine 340 series. It features Safe Torque Off up to SIL3 / PLe with dual input, 5 points U/F, sensorless and current vector control with sensor, and master/slave daisy chain through PTO/PTI. It supports MachineStruxure integration in SoMachine, operates in velocity mode and torque control, and offers dynamic motor control performance with up to 400Hz speed bandwidth for cyclic application tasks (1ms). The drive includes an energy-saving mode, a built-in EMC filter (class C3), and a built-in heatsink. It operates on a supply voltage of 323-528Vac (380Vac / 400Vac / 480Vac / 500Vac nom.), with dimensions of H385mm x W180mm x D249mm, and an IP20 degree of protection. The rated current is 62A for normal-duty and 46A for heavy-duty at 4kHz, with a maximum current of 84A for normal-duty and 83A for heavy-duty for 2s, and 68.2A for normal-duty and 69A for heavy-duty for 60s. It is designed for cabinet mounting and uses Ethernet/IP and Modbus TCP for communication. The network is 3-phase (3P) with an output frequency of 1-599 Hz. It includes 1 analog output, 5 digital inputs plus additional inputs for Safe Torque Off and pulse input, 2 digital outputs programmable as inputs or outputs, and 1 analog input capable of accepting various signal types. The current consumption is specified for different conditions, and the rated active power is 30kW for normal-duty and 22kW for heavy-duty, equivalent to 40HP and 30HP respectively.

Schneider Electric

BMI0703P02F

$2,005.20

Verified stock: 4

Schneider Electric BMI0703P02F is an AC servo motor within the Servo motors sub-range, featuring an integrated servo drive and motor. It is designed with an absolute multi-turn 128ppr SinCos encoder, a smooth shaft, a holding brake, and triple (3) motor stacks. The servo motor operates on a supply voltage of 208Vac-480Vac, including specific ratings at 220Vac, 240Vac, and 400Vac. It offers a degree of protection rated at IP54 and IP65, with a rated current of 2.1A at 1600rpm and 208Vac, 1.87A at 3300rpm and 400Vac, and 1.71A at 3800rpm and 480Vac. The mounting mode is a 70x70mm flange, and it uses the HIPERFACE communication protocol. The net width of the motor is 70 mm. Its rotational speed varies with supply voltage, achieving 1600rpm at 208Vac, 3300rpm at 400Vac, and 3800rpm at 480Vac. The rated active power is 0.49kW / 490W at 1600rpm and 208Vac, 0.89kW / 890W at 3300rpm and 400Vac, and 0.94kW / 940W at 3800rpm and 480Vac. The maximum torque is 8.06Nm, with a stall torque of 2.96Nm, and operational torques of 2.93Nm at 1600rpm and 208Vac, 2.58Nm at 3300rpm and 400Vac, and 2.35Nm at 3800rpm and 480Vac. The moment of inertia is 1.78kg.cm.

Schneider Electric

LC1DT206BL

$133.00

Verified stock: 3

Schneider Electric LC1DT206BL is a magnetic contactor from the Deca sub-range, designed with a low-consumption coil that uses less than 2.4W of power. It features ring-lugs connections and is equipped with 4 poles (4NO) for comprehensive circuit control. This contactor is rated for a current of 20A under AC-1 conditions and can be mounted on a DIN rail for easy installation. With a net width of 45 mm and an IP20 degree of protection, it ensures a compact and secure setup. The control voltage ranges from 19.2 to 30Vdc, with a nominal 24Vdc, allowing for flexible operation within 0.8 to 1.25 times the control voltage (Uc). It includes 1 Normally Open (NO) and 1 Normally Closed (NC) auxiliary contacts, both designed for instantaneous operation. The LC1DT206BL boasts a mechanical durability of 15 million operations at no load and can handle rated impulse voltages up to 6 kV. It supports a phase-to-phase rated voltage up to 690 V AC, ensuring compatibility with a wide range of electrical systems.

Schneider Electric

ATV340D15N4

Verified stock: 3

Schneider Electric ATV340D15N4 is a Variable Speed/Frequency Drive (VSD/VFD) / Inverter from the Altivar Machine 340 series. It features Safe Torque Off up to SIL3 / PLe with dual input, 5 points U/F, sensorless and current vector control with or without sensor, and Master/Slave daisy chain through PTO/PTI. It is integrated with MachineStruxure in SoMachine, operates in velocity mode and torque control, and offers 220% Tn in open or closed loop control. The drive provides dynamic motor control performance with up to 400Hz speed bandwidth and supports cyclic application tasks with 1ms. It includes an energy-saving mode, built-in EMC filter (class C3), and built-in heatsink. The supply voltage ranges from 323-528Vac, with dimensions of H385mm x W180mm x D249mm, and an IP20 degree of protection. Rated current is 39A for normal-duty and 32A for heavy-duty at 4kHz, with maximum currents of 53A (normal-duty) and 58A (heavy-duty) for 2s, and 42.9A (normal-duty) and 48A (heavy-duty) for 60s. It supports cabinet mounting, uses Modbus for communication, operates on a 3-phase network with an output frequency of 1-599 Hz, and includes 1 analog output, 5+1 digital inputs, 2 digital outputs programmable as inputs or outputs, 1 digital output with C/O SPDT relay contact, and 1 digital output with NO relay contact. It also features 2 analog inputs and has a current consumption of 42.3A to 44.9A depending on the mode and voltage, with a rated active power of 18.5kW for normal-duty and 15kW for heavy-duty, equivalent to 25HP and 20HP respectively.

Schneider Electric

LC1DT20BL

$133.00

Verified stock: 2

Schneider Electric LC1DT20BL is a magnetic contactor from the Deca sub-range, designed with a low-consumption coil that uses less than 2.4W. It features screw connections for secure installation and operates with 4 poles (4NO) capable of handling a rated current of 20A under AC-1 conditions. This contactor is designed for DIN rail mounting, ensuring a compact and efficient setup with a net width of 45 mm. It offers a degree of protection rated at IP20 and operates with a control voltage range of 19.2-30Vdc, nominally at 24Vdc, which is 0.8 to 1.25 times the control voltage (Uc). The LC1DT20BL can handle a rated operating voltage (Ue) up to 690 V and is equipped with 1 Normally Open (NO) and 1 Normally Closed (NC) auxiliary contacts, both rated for instantaneous operation. The contacts are designed to withstand a rated impulse voltage (Uimp) of 6 kV. With mechanical durability rated at 15 million operations at no load, this contactor is built for longevity. It supports a phase-to-phase rated voltage (AC) of 690 V and maintains a power consumption of 2.4 W.

Schneider Electric

MH31002P12F2200

Verified stock: 0

Schneider Electric MH31002P12F2200 is an AC servo motor characterized by a 100x100mm flange mounting mode and operates within an ambient air temperature range of -20 to +40°C. It features an absolute multi-turn 128ppr SinCos encoder, a parallel key shaft with a holding brake, and double motor stacks designed for optimized torque and speed of rotation with medium inertia. The connection is facilitated by a rotatable right-angled connector, and it supports a wide supply voltage range from 115Vac to 480Vac, including specific voltages such as 120Vac, 200Vac, 208Vac, 220Vac, 230Vac, 240Vac, 380Vac, 400Vac, 415Vac, and 440Vac. This servo motor, part of the Servo motors sub-range, offers a degree of protection rated at IP65 and utilizes the HIPERFACE communication protocol. It achieves a rotational speed of 4000rpm, a stall torque of 6Nm, and is rated at 1.2kW or 1200W of active power, equivalent to 2.7HP. The moment of inertia is specified as 6.4kg.cm2, with a nominal torque of 4.2Nm and a maximum torque capacity of 18Nm.

Schneider Electric

LC1D256BL

$189.00

Verified stock: 19

Schneider Electric LC1D256BL is a magnetic contactor from the Deca sub-range, designed with a low-consumption coil that uses less than 2.4W. It features ring-lugs connections and is equipped with 3 poles (3P; 3NO), supporting a rated current of 40A for AC-1 and 25A for 440Vac in AC-3. This contactor is suitable for DIN rail mounting and has a net width of 45 mm. It offers a degree of protection rated at IP20 and operates with a control voltage (DC) range of 19.2-30Vdc, with a nominal 24Vdc. The rated operating voltage (Ue) is up to 690 V, and it includes 1 normally open (NO) auxiliary contact. The rated impulse voltage (Uimp) is 6 kV. Its rated active power capacity spans from 5.5kW at 220-230Vac to 15kW at 660-690Vac in AC-3. Additionally, it has 1 normally closed (NC) auxiliary contact with a contacts type of 1NO+1NC instantaneous aux. The rated power in horsepower (HP) ranges from 2HP at 115Vac to 20HP at 575-600Vac, under UL/CSA standards for both single-phase and 3-phase systems. The mechanical durability of the LC1D256BL is rated at 15 million operations at no load, and its electrical durability with load is 1.6 million operations. The rated voltage (AC) phase-to-phase is 690 V, with a power consumption of 2.4 W.

Schneider Electric

ATV320U07N4C

$421.00

Verified stock: 1

Schneider Electric ATV320U07N4C is a Variable Speed/Frequency Drive (VSD/VFD) / Inverter from the Altivar Machine 320 series. It features a range of functions including STO (Safe Torque Off up to SIL3 / PLe), SS1 (Safe Stop 1), SLS (Safely Limited Speed), SMS (Safe maximum speed), GDL (Guard door locking), and U/F ratio adjustments (2 points / 5 points / energy saving / quadratic). It offers sensorless flux vector control in standard or energy-saving modes and integrates with MachineStruxure in SoMachine. The drive allows operation in velocity mode and torque control with current limitation, and supports customizable application functions with ATV Logic, allowing up to 50 function blocks. It is designed with a built-in EMC filter, a compact control block, and is ATEX compliant. The supply voltage ranges from 323-550Vac, with dimensions of H143mm x W105mm x D158mm, and an IP20 degree of protection. It has a rated current of 2.3A at 4kHz and a maximum current of 3.5A for 60 seconds. Suitable for cabinet mounting, it uses Modbus and CANopen communication protocols, operates on a 3-phase network with an output frequency of 1-599 Hz, and includes 1 analog output, 4 digital inputs plus additional specialized inputs, 2 digital outputs, and 3 analog inputs. The current consumption is 3.6A at 380Vac and 2.8A at 500Vac, with a rated active power of 750W / 0.75kW, rated power of 1HP, and power dissipation/losses of 38 W.

Schneider Electric

ATV340D22N4E

$3,608.25

Verified stock: 5

Schneider Electric ATV340D22N4E is a Variable Speed/Frequency Drive (VSD/VFD) / Inverter from the Altivar Machine 340 series. It features Safe Torque Off up to SIL3 / PLe with dual input, 5 points U/F, sensorless and current vector control with sensor, and master/slave daisy chain through PTO/PTI. It supports MachineStruxure integration in SoMachine, operates in velocity mode and torque control, and offers dynamic motor control performance with up to 400Hz speed bandwidth for cyclic application tasks (1ms). The drive includes an energy-saving mode, a built-in EMC filter (class C3), and a built-in heatsink. It operates on a supply voltage of 323-528Vac (380Vac / 400Vac / 480Vac / 500Vac nom.), with dimensions of H385mm x W180mm x D249mm, and an IP20 degree of protection. The rated current is 62A for normal-duty and 46A for heavy-duty at 4kHz, with a maximum current of 84A for normal-duty and 83A for heavy-duty for 2s, and 68.2A for normal-duty and 69A for heavy-duty for 60s. It is designed for cabinet mounting and uses Ethernet/IP and Modbus TCP for communication. The network is 3-phase (3P) with an output frequency of 1-599 Hz. It includes 1 analog output, 5 digital inputs plus additional inputs for Safe Torque Off and pulse input, 2 digital outputs programmable as inputs or outputs, and 1 analog input capable of accepting various signal types. The current consumption is specified for different conditions, and the rated active power is 30kW for normal-duty and 22kW for heavy-duty, equivalent to 40HP and 30HP respectively.

Schneider Electric

BMI0703P02F

$2,005.20

Verified stock: 4

Schneider Electric BMI0703P02F is an AC servo motor within the Servo motors sub-range, featuring an integrated servo drive and motor. It is designed with an absolute multi-turn 128ppr SinCos encoder, a smooth shaft, a holding brake, and triple (3) motor stacks. The servo motor operates on a supply voltage of 208Vac-480Vac, including specific ratings at 220Vac, 240Vac, and 400Vac. It offers a degree of protection rated at IP54 and IP65, with a rated current of 2.1A at 1600rpm and 208Vac, 1.87A at 3300rpm and 400Vac, and 1.71A at 3800rpm and 480Vac. The mounting mode is a 70x70mm flange, and it uses the HIPERFACE communication protocol. The net width of the motor is 70 mm. Its rotational speed varies with supply voltage, achieving 1600rpm at 208Vac, 3300rpm at 400Vac, and 3800rpm at 480Vac. The rated active power is 0.49kW / 490W at 1600rpm and 208Vac, 0.89kW / 890W at 3300rpm and 400Vac, and 0.94kW / 940W at 3800rpm and 480Vac. The maximum torque is 8.06Nm, with a stall torque of 2.96Nm, and operational torques of 2.93Nm at 1600rpm and 208Vac, 2.58Nm at 3300rpm and 400Vac, and 2.35Nm at 3800rpm and 480Vac. The moment of inertia is 1.78kg.cm.

Schneider Electric

LC1DT206BL

$133.00

Verified stock: 3

Schneider Electric LC1DT206BL is a magnetic contactor from the Deca sub-range, designed with a low-consumption coil that uses less than 2.4W of power. It features ring-lugs connections and is equipped with 4 poles (4NO) for comprehensive circuit control. This contactor is rated for a current of 20A under AC-1 conditions and can be mounted on a DIN rail for easy installation. With a net width of 45 mm and an IP20 degree of protection, it ensures a compact and secure setup. The control voltage ranges from 19.2 to 30Vdc, with a nominal 24Vdc, allowing for flexible operation within 0.8 to 1.25 times the control voltage (Uc). It includes 1 Normally Open (NO) and 1 Normally Closed (NC) auxiliary contacts, both designed for instantaneous operation. The LC1DT206BL boasts a mechanical durability of 15 million operations at no load and can handle rated impulse voltages up to 6 kV. It supports a phase-to-phase rated voltage up to 690 V AC, ensuring compatibility with a wide range of electrical systems.

Schneider Electric

ATV340D15N4

Verified stock: 3

Schneider Electric ATV340D15N4 is a Variable Speed/Frequency Drive (VSD/VFD) / Inverter from the Altivar Machine 340 series. It features Safe Torque Off up to SIL3 / PLe with dual input, 5 points U/F, sensorless and current vector control with or without sensor, and Master/Slave daisy chain through PTO/PTI. It is integrated with MachineStruxure in SoMachine, operates in velocity mode and torque control, and offers 220% Tn in open or closed loop control. The drive provides dynamic motor control performance with up to 400Hz speed bandwidth and supports cyclic application tasks with 1ms. It includes an energy-saving mode, built-in EMC filter (class C3), and built-in heatsink. The supply voltage ranges from 323-528Vac, with dimensions of H385mm x W180mm x D249mm, and an IP20 degree of protection. Rated current is 39A for normal-duty and 32A for heavy-duty at 4kHz, with maximum currents of 53A (normal-duty) and 58A (heavy-duty) for 2s, and 42.9A (normal-duty) and 48A (heavy-duty) for 60s. It supports cabinet mounting, uses Modbus for communication, operates on a 3-phase network with an output frequency of 1-599 Hz, and includes 1 analog output, 5+1 digital inputs, 2 digital outputs programmable as inputs or outputs, 1 digital output with C/O SPDT relay contact, and 1 digital output with NO relay contact. It also features 2 analog inputs and has a current consumption of 42.3A to 44.9A depending on the mode and voltage, with a rated active power of 18.5kW for normal-duty and 15kW for heavy-duty, equivalent to 25HP and 20HP respectively.

Schneider Electric

LC1DT20BL

$133.00

Verified stock: 2

Schneider Electric LC1DT20BL is a magnetic contactor from the Deca sub-range, designed with a low-consumption coil that uses less than 2.4W. It features screw connections for secure installation and operates with 4 poles (4NO) capable of handling a rated current of 20A under AC-1 conditions. This contactor is designed for DIN rail mounting, ensuring a compact and efficient setup with a net width of 45 mm. It offers a degree of protection rated at IP20 and operates with a control voltage range of 19.2-30Vdc, nominally at 24Vdc, which is 0.8 to 1.25 times the control voltage (Uc). The LC1DT20BL can handle a rated operating voltage (Ue) up to 690 V and is equipped with 1 Normally Open (NO) and 1 Normally Closed (NC) auxiliary contacts, both rated for instantaneous operation. The contacts are designed to withstand a rated impulse voltage (Uimp) of 6 kV. With mechanical durability rated at 15 million operations at no load, this contactor is built for longevity. It supports a phase-to-phase rated voltage (AC) of 690 V and maintains a power consumption of 2.4 W.

Schneider Electric

MH31002P12F2200

Verified stock: 0

Schneider Electric MH31002P12F2200 is an AC servo motor characterized by a 100x100mm flange mounting mode and operates within an ambient air temperature range of -20 to +40°C. It features an absolute multi-turn 128ppr SinCos encoder, a parallel key shaft with a holding brake, and double motor stacks designed for optimized torque and speed of rotation with medium inertia. The connection is facilitated by a rotatable right-angled connector, and it supports a wide supply voltage range from 115Vac to 480Vac, including specific voltages such as 120Vac, 200Vac, 208Vac, 220Vac, 230Vac, 240Vac, 380Vac, 400Vac, 415Vac, and 440Vac. This servo motor, part of the Servo motors sub-range, offers a degree of protection rated at IP65 and utilizes the HIPERFACE communication protocol. It achieves a rotational speed of 4000rpm, a stall torque of 6Nm, and is rated at 1.2kW or 1200W of active power, equivalent to 2.7HP. The moment of inertia is specified as 6.4kg.cm2, with a nominal torque of 4.2Nm and a maximum torque capacity of 18Nm.

Schneider Electric

USTS51C Schneider Electric Electrical Load Centers

Part#:USTS51C

Manufacturer:Schneider Electric

Product condition

USTS51C Description

Relevant products

LC1D256BL

ATV320U07N4C

ATV340D22N4E

BMI0703P02F

LC1DT206BL

Recommended parts

EL1809

RSM-2RKM 40

53113530

WMFS 3F-PCB

QOB210