Powermatic Associates Logo

ATV71HD30N4383 Schneider Electric Variable Frequency Drives (VFD)

Schneider Electric

Part#:ATV71HD30N4383

Manufacturer:Schneider Electric

Product Lifecycle:Active

Get a quick Quote!

Schneider Electric ATV71HD30N4383 is a Variable Speed/Frequency Drive (VSD/VFD) / Inverter from the Altivar 71 series designed for synchronous motor control. It features a built-in DC choke, EMC filter, and heatsink, offering variable speed/frequency drive capabilities with U/F ratio (2 points / 5 points), sensorless flux vector control, ENA System, and vector control with or without speed feedback. This model can deliver 220% of the nominal motor torque for 2 seconds and 170% of the nominal motor torque for 60 seconds. It operates on a supply voltage of 323-528Vac (380Vac / 400Vac / 480Vac / 500Vac nom.), with dimensions of H550mm x W240mm x D266mm and offers a degree of protection of IP20, IP21, and UL type 1. The rated current is 66A (380Vac; 4kHz), 52A (460Vac; 4kHz), with a maximum current of 109A for 2 seconds and 99A for 60 seconds. It supports wall mounting and uses Modbus and CANopen communication protocols. Designed for a 3-phase (3P) network with an output frequency of 0.1-599 Hz, it includes 1 analog output (0-10Vdc / 0-20mA), 5 digital inputs (24Vdc; sink/source) plus 1 additional digital input programmable as discrete or PTC input and another for PWR safety, along with 3 digital outputs. It also features 2 analog inputs for comprehensive control. The current consumption is rated at 66A (380Vac) and 56A (480Vac), with a rated active power of 30kW and rated power of 40HP.

About the manufacturer: Schneider Electric is one of the manufacturers that offers Variable Frequency Drives (VFD) that you can order at Powermatic Associates site. We provide digital solutions for energy and automation that improve efficiency and support sustainability. Our comprehensive solutions include cutting-edge energy technologies, real-time automation, software, and services for residential, commercial, and industrial settings.

Check out the ATV71HD30N4383 Schneider Electric price in the box on the right side or send a quick quote.

Product condition

New Factory Sealed

New Factory Sealed - New condition, never used, original OEM part with original packaging and factory seal.

ATV71HD30N4383 Description

Schneider Electric ATV71HD30N4383 is a Variable Speed/Frequency Drive (VSD/VFD) / Inverter from the Altivar 71 series designed for synchronous motor control. It features a built-in DC choke, EMC filter, and heatsink, offering variable speed/frequency drive capabilities with U/F ratio (2 points / 5 points), sensorless flux vector control, ENA System, and vector control with or without speed feedback. This model can deliver 220% of the nominal motor torque for 2 seconds and 170% of the nominal motor torque for 60 seconds. It operates on a supply voltage of 323-528Vac (380Vac / 400Vac / 480Vac / 500Vac nom.), with dimensions of H550mm x W240mm x D266mm and offers a degree of protection of IP20, IP21, and UL type 1. The rated current is 66A (380Vac; 4kHz), 52A (460Vac; 4kHz), with a maximum current of 109A for 2 seconds and 99A for 60 seconds. It supports wall mounting and uses Modbus and CANopen communication protocols. Designed for a 3-phase (3P) network with an output frequency of 0.1-599 Hz, it includes 1 analog output (0-10Vdc / 0-20mA), 5 digital inputs (24Vdc; sink/source) plus 1 additional digital input programmable as discrete or PTC input and another for PWR safety, along with 3 digital outputs. It also features 2 analog inputs for comprehensive control. The current consumption is rated at 66A (380Vac) and 56A (480Vac), with a rated active power of 30kW and rated power of 40HP.

Manufacturer warranty

Get a quick Quote!

Request a quote, and we will send you price and availability within minutes.

Select Qty:

Average response time: 11 minutes

Worldwide Shipping and Delivery

Secure Payment Processing

Warranty

Responsive Customer Support

Got Questions? We've Got Answers!

Need more details?

Feel free to chat with us

Relevant products

ATV320U07N4C

Verified stock: 1

Schneider Electric ATV320U07N4C is a Variable Speed/Frequency Drive (VSD/VFD) / Inverter from the Altivar Machine 320 series. It features a range of functions including STO (Safe Torque Off up to SIL3 / PLe), SS1 (Safe Stop 1), SLS (Safely Limited Speed), SMS (Safe maximum speed), GDL (Guard door locking), and U/F ratio adjustments (2 points / 5 points / energy saving / quadratic). It offers sensorless flux vector control in standard or energy-saving modes and integrates with MachineStruxure in SoMachine. The drive allows operation in velocity mode and torque control with current limitation, and supports customizable application functions with ATV Logic, allowing up to 50 function blocks. It is designed with a built-in EMC filter, a compact control block, and is ATEX compliant. The supply voltage ranges from 323-550Vac, with dimensions of H143mm x W105mm x D158mm, and an IP20 degree of protection. It has a rated current of 2.3A at 4kHz and a maximum current of 3.5A for 60 seconds. Suitable for cabinet mounting, it uses Modbus and CANopen communication protocols, operates on a 3-phase network with an output frequency of 1-599 Hz, and includes 1 analog output, 4 digital inputs plus additional specialized inputs, 2 digital outputs, and 3 analog inputs. The current consumption is 3.6A at 380Vac and 2.8A at 500Vac, with a rated active power of 750W / 0.75kW, rated power of 1HP, and power dissipation/losses of 38 W.

Schneider Electric

ATV320D15N4B

Verified stock: 1

Schneider Electric ATV320D15N4B is a Variable Speed/Frequency Drive (VSD/VFD) / Inverter from the Altivar Machine 320 series, designed for cabinet mounting with a built-in EMC filter and ATEX compliance. It operates on a supply voltage of 323-550Vac, supporting 380Vac, 400Vac, 480Vac, and 500Vac nominal values, and has a degree of protection rated at IP20. The device dimensions are H330mm x W180mm x D232mm. It features a rated current of 33A at 4kHz and can handle a maximum current of 49.5A for up to 60 seconds. The ATV320D15N4B offers various functions including STO, SS1, SLS, SMS, GDL, U/F ratio adjustments, sensorless flux vector control, and customizable application functions with ATV Logic. It integrates seamlessly with MachineStruxure through SoMachine and supports operation in velocity mode and torque control. Communication is facilitated via Modbus and CANopen protocols on a 3-phase network with an output frequency range of 1-599 Hz. It includes 1 analog output, 4+1+1+1 digital inputs with specific functionalities, and 3 digital outputs, alongside 3 analog inputs. The current consumption is specified at 47.3A for 380Vac and 33.3A for 500Vac, with a rated active power of 15kW (20HP) and power dissipation/losses at 480W.

Schneider Electric

MH31002P12F2200

Verified stock: 0

Schneider Electric MH31002P12F2200 is an AC servo motor characterized by a 100x100mm flange mounting mode and operates within an ambient air temperature range of -20 to +40°C. It features an absolute multi-turn 128ppr SinCos encoder, a parallel key shaft with a holding brake, and double motor stacks designed for optimized torque and speed of rotation with medium inertia. The connection is facilitated by a rotatable right-angled connector, and it supports a wide supply voltage range from 115Vac to 480Vac, including specific voltages such as 120Vac, 200Vac, 208Vac, 220Vac, 230Vac, 240Vac, 380Vac, 400Vac, 415Vac, and 440Vac. This servo motor, part of the Servo motors sub-range, offers a degree of protection rated at IP65 and utilizes the HIPERFACE communication protocol. It achieves a rotational speed of 4000rpm, a stall torque of 6Nm, and is rated at 1.2kW or 1200W of active power, equivalent to 2.7HP. The moment of inertia is specified as 6.4kg.cm2, with a nominal torque of 4.2Nm and a maximum torque capacity of 18Nm.

Schneider Electric

MH30703P07F2200

Verified stock: 0

Schneider Electric MH30703P07F2200 is an AC servo motor characterized by its 70x70mm flange mounting mode and operates within an ambient air temperature range of -20 to +40°C. This motor features an absolute multi-turn 16ppr SinCos encoder, a smooth shaft with a holding brake, and triple (3) motor stacks designed for optimized torque and speed of rotation, catering to medium-inertia applications. It comes with a rotatable right-angled connector for flexible installation and supports a wide supply voltage range from 115Vac to 480Vac, including specific voltages such as 120Vac, 200Vac, 208Vac, 220Vac, 230Vac, 240Vac, 380Vac, 400Vac, 415Vac, and 440Vac. Part of the Servo motors sub-range, it boasts an IP65 degree of protection, utilizes the HIPERFACE communication protocol, and achieves a rotational speed of 5000rpm. The motor has a stall torque of 3.4Nm, a rated active power of 1.3kW (1300W) or 1.8HP, a moment of inertia of 4kg.cm^2, a nominal torque of 2.3Nm, and can reach a maximum torque of 10.2Nm.

Schneider Electric

LC1D806BD Part Image. Manufactured by Schneider Electric.

LC1D806BD

Verified stock: 0

Schneider Electric LC1D806BD is a magnetic contactor from the Deca sub-range, designed for ring-lugs connections. It features 3 poles (3P; 3NO) and is rated for a current of 125A (AC-1) and 80A (440Vac; AC-3). This contactor is suitable for DIN rail mounting and has a net width of 85 mm. It offers a degree of protection of IP20 and operates with a control voltage (DC) of 20.4-26.4Vdc (24Vdc nom.; 0.85...1.1 x Uc). The rated operating voltage (Ue) is 1000 V, and it includes 1 normally open (NO) auxiliary contact. The rated impulse voltage (Uimp) is 8 kV. Its rated active power ranges from 22kW (220-230Vac; AC-3) to 55kW (500Vac; AC-3), with specific ratings for various voltages up to 1000Vac. It also features 1 normally closed (NC) auxiliary contact and instantaneous auxiliary contacts type of 1NO+1NC. The rated power in horsepower (HP) varies from 7.5HP at 115Vac single-phase to 60HP at 575-600Vac 3-phase. The mechanical durability of the LC1D806BD is rated at 4,000,000 operations, and its electrical durability with load is 1,500,000 operations. The rated voltage (AC) phase-to-phase is 1000 V.

Schneider Electric

What can I help you find today?

Recommended parts

LC1D95M7

LC1D95M7

Schneider Electric LC1D95M7 is a magnetic contactor from the Deca sub-range, featuring screw connections and three poles (3P; 3NO). It has a rated current of 125A (AC-1) and 95A (440Vac; AC-3), with a mounting mode designed for DIN rail installation. The net width of the contactor is 85 mm, and it offers a degree of protection rated at IP20. The control voltage (AC) ranges from 176-242Vac (220Vac nom.; 50Hz; 0.8...1.1 x Uc) to 187-242Vac (220Vac nom.; 60Hz; 0.85...1.1 x Uc), with a rated operating voltage (Ue) of 1000 V. It includes 1 normally open (NO) auxiliary contact and 1 normally closed (NC) auxiliary contact, both of the instantaneous type (1NO+1NC). The rated impulse voltage (Uimp) is 8 kV. This contactor is capable of handling rated active power ranging from 25kW (220-230Vac; AC-3) to 55kW (500Vac; AC-3), with specific ratings for various voltages up to 1000Vac. It also supports rated power (HP) for motors from 7.5HP (115Vac; single-phase) to 60HP (575-600Vac; 3-phase), under UL/CSA standards. The mechanical durability of the LC1D95M7 is rated at 4,000,000 operations, and its electrical durability (with load) is rated at 1,200,000 operations. The rated voltage (AC) for phase-to-phase connections is 1000 V.

Schneider Electric

17

LC1D115BD

LC1D115BD

Schneider Electric LC1D115BD is a magnetic contactor from the Deca sub-range, designed with screw connections and three poles (3P; 3NO). It features a rated current of 200A for AC-1 and 115A for 440Vac in AC-3 conditions. This contactor is suitable for DIN rail mounting and has a net width of 120 mm. It offers a degree of protection rated at IP20 and operates with a control voltage (DC) range of 18-28.8Vdc, with a nominal 24Vdc. The rated operating voltage (Ue) is up to 1000 V, and it includes 1 normally open (NO) auxiliary contact. The rated impulse voltage (Uimp) is 8 kV. Its rated active power capacity spans from 30kW at 220-230Vac to 80kW at 660-690Vac in AC-3 conditions, with additional ratings for specific voltages. It also features 1 normally closed (NC) auxiliary contact with contacts type of 1NO+1NC instantaneous aux. The rated power in horsepower (HP) ranges from 30HP at 200-208Vac to 100HP at 575-600Vac for 3-phase, 50Hz/60Hz, UL/CSA conditions. The mechanical durability of the LC1D115BD is rated at 8 million operations at no load, and its electrical durability with load is rated at 950,000 operations. The rated voltage for phase-to-phase AC conditions is 1000 V.

Schneider Electric

6