1803604 Phoenix Contact Electrical Measuring & Monitoring Instruments

1803604 on Powermatic Associates
Phoenix Contact

Part#:1803604

Manufacturer:Phoenix Contact

Category:Electrical Measuring & Monitoring Instruments

Product Lifecycle:Active

Only 3 left in stock. Order Now!

Mar 14, 2025

Product description

PCB connector, nominal cross section: 1.5 mm², color: green, nominal current: 8 A, rated voltage (III/2): 160 V, contact surface: Tin, type of contact: Female connector, Number of potentials: 5, Number of rows: 1, Number of positions per row: 5, number of

Product Details

  • Number of connections
    5
  • Rated voltage (II/2)
    320 V
  • Rated voltage (III/3)
    160 V
  • Conductor cross section solid
    0.14 mm² ... 1.5 mm²
  • Nom. voltage
    160 V
  • Rated surge voltage (II/2)
    2.5 kV
  • Side guide rails
    yes
  • Nominal current
    8 A
  • Rated surge voltage (III/3)
    2.5 kV
  • pluggable
    Yes
  • Rated voltage (III/2)
    160 V
  • Insulating material
    PA
  • Number of positions
    20
  • Number of potentials
    5
  • Conductor cross section flexible, with ferrule without plastic sleeve
    0.25 mm² ... 1.5 mm²
  • 2 conductors with same cross section, flexible
    0.08 mm² ... 0.75 mm²
  • 2 conductors with the same cross section, flexible, with TWIN ferrule with plastic sleeve
    0.5 mm² ... 0.5 mm²
  • Torque
    0.22 Nm ... 0.25 Nm
  • Caption
    Type: MC 1,5/...-ST-3,81 with MC 1,5/...-G-3,81
  • Height [ h ]
    11.1 mm
  • Pull-out test
    IEC 60999-1:1999-11
  • No. of cycles
    25
  • Polarization and coding
    IEC 60512-13-5:2006-02
  • Minimum clearance - inhomogeneous field (II/2)
    1.5 mm
  • Note on connection cross section
    With connected conductor 1.5 mm² (solid).
  • Contact resistance R1
    1.3 mΩ
  • Range of articles
    MC 1,5/..-ST
  • Conductor cross section flexible
    0.14 mm² ... 1.5 mm²
  • Pitch
    3.81 mm
  • Drive form screw head
    Slotted (L)
  • Conductor cross section AWG / kcmil
    28 ... 16
  • 2 conductors with same cross section, flexible, with ferrule without plastic sleeve
    0.25 mm² ... 0.34 mm²
  • Metal surface terminal point (top layer)
    Tin (4 - 8 µm Sn)
  • Metal surface contact area (top layer)
    Tin (4 - 8 µm Sn)
  • Glow wire flammability index GWFI according to EN 60695-2-12
    850
  • Width [ w ]
    19.84 mm
  • Ambient temperature (assembly)
    -5 °C ... 100 °C
  • Dimension check
    IEC 60512-1-2:2002-02
  • Withdraw strength per pos. approx.
    4 N
  • Clearances and creepage distances
    IEC 60664-1:2007-04
  • Specification
    IEC 61984:2008-10
  • Insertion/withdrawal cycles
    25
  • Thermal stress
    100 °C/168 h
  • China RoHS
    Environmentally Friendly Use Period = 50 years
  • ECLASS 11.0
    27460202
  • ECLASS 7.0
    27440309
  • ETIM 3.0
    EC001121
  • UNSPSC 20.0
    39121409
  • Type of contact
    Female connector
  • Number of levels
    1
  • Rated surge voltage (III/2)
    2.5 kV
  • 2 conductors with same cross section, solid
    0.08 mm² ... 0.5 mm²
  • Note
    WEEE/RoHS-compliant, free of whiskers according to IEC 60068-2-82/JEDEC JESD 201
  • Surface characteristics
    hot-dip tin-plated
  • Glow wire ignition temperature GWIT according to EN 60695-2-13
    775
  • Temperature for the ball pressure test according to EN 60695-10-2
    125 °C
  • Pieces per package
    250
  • Denomination packing units
    Pcs.
  • Test specification
    IEC 61984
  • Visual inspection
    IEC 60512-1-1:2002-02
  • Contact holder in insert
    IEC 60512-15-1:2008-05
  • Minimum creepage distance value (II/2)
    1.6 mm
  • Polarization when inserted requirement >20 N
    Test passed
  • Contact resistance R2
    1.5 mΩ
  • Result, degree of protection, IP code
    Finger safety with IP20 test finger
  • ECLASS 4.1
    27260700
  • ECLASS 5.1
    27260700
  • ETIM 7.0
    EC002638
  • UNSPSC 13.2
    39121409
  • UNSPSC 21.0
    39121409
  • Brief article description
    PCB connector
  • Plug-in system
    MINI COMBICON
  • Screw thread
    M2
  • Locking
    without
  • Connection method
    Screw connection with tension sleeve
  • Conductor cross section, flexible, with ferrule, with plastic sleeve
    0.25 mm² ... 0.5 mm²
  • Stripping length
    7 mm
  • Housing color
    green (6021)
  • Flammability rating according to UL 94
    V0
  • Length [ l ]
    16.1 mm
  • Height (without solder pin)
    11.1 mm
  • Ambient temperature (operation)
    -40 °C ... 100 °C (dependent on the derating curve)
  • Test for conductor damage and slackening
    IEC 60999-1:1999-11
  • Insertion and withdrawal force
    IEC 60512-13-2:2006-02
  • Minimum clearance - inhomogeneous field (III/3)
    1.5 mm
  • Minimum creepage distance value (III/3)
    2 mm
  • Impulse withstand voltage at sea level
    2.95 kV
  • Cold stress
    -40 °C/2 h
  • ECLASS 5.0
    27260700
  • ETIM 6.0
    EC002638
  • UNSPSC 11
    39121409
  • UNSPSC 19.0
    39121409
  • UNSPSC 18.0
    39121409
  • Cylindrical gauge a x b / diameter
    2.4 mm x 1.5 mm / 1.6 mm
  • Contact material
    Cu alloy
  • Insulating material group
    I
  • CTI according to IEC 60112
    600
  • Type of packaging
    packed in cardboard
  • Ambient temperature (storage/transport)
    -40 °C ... 70 °C
  • Conductor cross section / conductor type / tensile force
    0.14 mm² / solid / > 7 N
  • Resistance of inscriptions
    IEC 60068-2-70:1995-12
  • Insertion strength per pos. approx.
    6 N
  • Test force per pos.
    21 N
  • Minimum clearance - inhomogeneous field (III/2)
    1.5 mm
  • Minimum creepage distance value (III/2)
    1.5 mm
  • Contact holder in insert requirements >20 N
    Test passed
  • Corrosive stress
    0.2 dm3 SO2 on 300 dm3/40 °C/1 cycle
  • Upper limiting temperature requirements <100 °C
    Test passed
  • Power-frequency withstand voltage
    1.39 kV
  • ETIM 4.0
    EC002638
  • ECLASS 9.0
    27440309
  • UNSPSC 7.0901
    39121409
  • ECLASS 10.0.1
    27440309
  • ECLASS 4.0
    27260700
  • ECLASS 6.0
    27260700
  • UNSPSC 6.01
    30211810
  • UNSPSC 12.01
    39121409

Product condition

New Factory Sealed

New Factory Sealed - New condition, never used, original OEM part with original packaging and factory seal.


Manufacturer warranty

1803604 Phoenix Contact

Get a quick Quote!

Request a quote, and we will send you price within minutes.

Stock:

3

Select Qty:

Average response time: 11 minutes

Worldwide Shipping and Delivery


Secure Payment Processing


Warranty


Responsive Customer Support

Got Questions? We've Got Answers!


Need more details?

Feel free to chat with us

Compare 1803604 with other products

Number of connections

Rated voltage (II/2)

Rated voltage (III/3)

Conductor cross section s...

Nom. voltage

Rated surge voltage (II/2...

Side guide rails

Nominal current

Rated surge voltage (III/...

pluggable

Rated voltage (III/2)

Insulating material

Number of positions

Number of potentials

Conductor cross section f...

2 conductors with same cr...

2 conductors with the sam...

Torque

Caption

Height [ h ]

Pull-out test

No. of cycles

Polarization and coding

Minimum clearance - inhom...

Note on connection cross ...

Contact resistance R1

Range of articles

Conductor cross section f...

Pitch

Drive form screw head

Conductor cross section A...

2 conductors with same cr...

Metal surface terminal po...

Metal surface contact are...

Glow wire flammability in...

Width [ w ]

Ambient temperature (asse...

Dimension check

Withdraw strength per pos...

Clearances and creepage d...

Specification

Insertion/withdrawal cycl...

Thermal stress

China RoHS

ECLASS 11.0

ECLASS 7.0

ETIM 3.0

UNSPSC 20.0

Type of contact

Number of levels

Rated surge voltage (III/...

2 conductors with same cr...

Note

Surface characteristics

Glow wire ignition temper...

Temperature for the ball ...

Pieces per package

Denomination packing unit...

Test specification

Visual inspection

Contact holder in insert

Minimum creepage distance...

Polarization when inserte...

Contact resistance R2

Result, degree of protect...

ECLASS 4.1

ECLASS 5.1

ETIM 7.0

UNSPSC 13.2

UNSPSC 21.0

Brief article description

Plug-in system

Screw thread

Locking

Connection method

Conductor cross section, ...

Stripping length

Housing color

Flammability rating accor...

Length [ l ]

Height (without solder pi...

Ambient temperature (oper...

Test for conductor damage...

Insertion and withdrawal ...

Minimum clearance - inhom...

Minimum creepage distance...

Impulse withstand voltage...

Cold stress

ECLASS 5.0

ETIM 6.0

UNSPSC 11

UNSPSC 19.0

UNSPSC 18.0

Cylindrical gauge a x b /...

Contact material

Insulating material group

CTI according to IEC 6011...

Type of packaging

Ambient temperature (stor...

Conductor cross section /...

Resistance of inscription...

Insertion strength per po...

Test force per pos.

Minimum clearance - inhom...

Minimum creepage distance...

Contact holder in insert ...

Corrosive stress

Upper limiting temperatur...

Power-frequency withstand...

ETIM 4.0

ECLASS 9.0

UNSPSC 7.0901

ECLASS 10.0.1

ECLASS 4.0

ECLASS 6.0

UNSPSC 6.01

UNSPSC 12.01

Conductor cross section s...

Min. AWG conductor cross ...

2 conductors with same cr...

Two conductors with the s...

Operating temperature

Tightening torque max

Conductor cross section s...

Conductor cross section f...

Conductor cross section f...

2 conductors with same cr...

Max. AWG conductor cross ...

2 conductors with same cr...

Two conductors with the s...

Ambient temperature (actu...

Permissible humidity (sto...

Conductor cross section A...

Conductor cross section f...

Internal cylindrical gage

Two conductors with the s...

Maximum load current

Connection in acc. with s...

Conductor cross section f...

Two conductors with the s...

Open side panel

Finger protection

Result of tight fit on su...

Short circuit stability r...

Rated surge voltage

Result of surge voltage t...

Tensile test result

Tight fit on carrier

Conductor cross section s...

Nominal voltage UN

Power frequency withstand...

Bending test turns

Short-time current

Proof of thermal characte...

Degree of pollution

Shock protection test spe...

Result of flexion and pul...

Overvoltage category

Result of the test for me...

Setpoint

Color

Result of temperature-ris...

Result of voltage-drop te...

Area of application

End cover width

Back of the hand protecti...

Potentials

Nominal cross section

Acceleration

Bending test conductor cr...

Test specification, oscil...

Shock form

Number of shocks per dire...

Calorimetric heat release...

Result of power-frequency...

Test directions

Test specification, shock...

Specific optical density ...

Fire protection for rail ...

Length

Fire protection for rail ...

Height NS 35/7,5

Oscillation, broadband no...

Test spectrum

Relative insulation mater...

Smoke gas toxicity NFPA 1...

Conductor cross section f...

Bending test rotation spe...

Conductor cross section A...

Conductor cross section f...

Shock test result

Shock duration

Surface flammability NFPA...

Width

Tightening torque, min

2 conductors with same cr...

Maximum power dissipation...

Requirement temperature-r...

Result of thermal test

Test frequency

Static insulating materia...

Fire protection for rail ...

Height

Nominal current IN

Test duration per axis

Fire protection for rail ...

Height NS 35/15

ETIM 2.0

ASD level

Temperature index of insu...

Selected product

1803604
3 in stock
1803604
Phoenix Contact

PCB connector, nominal cross section: 1.5 mm², color: green, nominal current: 8 A, rated voltage (II...

Number of connections5

Rated voltage (II/2)320 V

Rated voltage (III/3)160 V

Conductor cross section solid0.14 mm² ... 1.5 mm²

Nom. voltage160 V

Rated surge voltage (II/2)2.5 kV

Side guide railsyes

Nominal current8 A

Rated surge voltage (III/3)2.5 kV

pluggableYes

Rated voltage (III/2)160 V

Insulating materialPA

Number of positions20

Number of potentials5

Conductor cross section flexible, with ferrule without plastic sleeve0.25 mm² ... 1.5 mm²

2 conductors with same cross section, flexible0.08 mm² ... 0.75 mm²

2 conductors with the same cross section, flexible, with TWIN ferrule with plastic sleeve0.5 mm² ... 0.5 mm²

Torque0.22 Nm ... 0.25 Nm

CaptionType: MC 1,5/...-ST-3,81 wit...

Height [ h ]11.1 mm

Pull-out testIEC 60999-1:1999-11

No. of cycles25

Polarization and codingIEC 60512-13-5:2006-02

Minimum clearance - inhomogeneous field (II/2)1.5 mm

Note on connection cross sectionWith connected conductor 1.5...

Contact resistance R11.3 mΩ

Range of articlesMC 1,5/..-ST

Conductor cross section flexible0.14 mm² ... 1.5 mm²

Pitch3.81 mm

Drive form screw headSlotted (L)

Conductor cross section AWG / kcmil28 ... 16

2 conductors with same cross section, flexible, with ferrule without plastic sleeve0.25 mm² ... 0.34 mm²

Metal surface terminal point (top layer)Tin (4 - 8 µm Sn)

Metal surface contact area (top layer)Tin (4 - 8 µm Sn)

Glow wire flammability index GWFI according to EN 60695-2-12850

Width [ w ]19.84 mm

Ambient temperature (assembly)-5 °C ... 100 °C

Dimension checkIEC 60512-1-2:2002-02

Withdraw strength per pos. approx.4 N

Clearances and creepage distancesIEC 60664-1:2007-04

SpecificationIEC 61984:2008-10

Insertion/withdrawal cycles25

Thermal stress100 °C/168 h

China RoHSEnvironmentally Friendly Use...

ECLASS 11.027460202

ECLASS 7.027440309

ETIM 3.0EC001121

UNSPSC 20.039121409

Type of contactFemale connector

Number of levels1

Rated surge voltage (III/2)2.5 kV

2 conductors with same cross section, solid0.08 mm² ... 0.5 mm²

NoteWEEE/RoHS-compliant, free of...

Surface characteristicshot-dip tin-plated

Glow wire ignition temperature GWIT according to EN 60695-2-13775

Temperature for the ball pressure test according to EN 60695-10-2125 °C

Pieces per package250

Denomination packing unitsPcs.

Test specificationIEC 61984

Visual inspectionIEC 60512-1-1:2002-02

Contact holder in insertIEC 60512-15-1:2008-05

Minimum creepage distance value (II/2)1.6 mm

Polarization when inserted requirement >20 NTest passed

Contact resistance R21.5 mΩ

Result, degree of protection, IP codeFinger safety with IP20 test...

ECLASS 4.127260700

ECLASS 5.127260700

ETIM 7.0EC002638

UNSPSC 13.239121409

UNSPSC 21.039121409

Brief article descriptionPCB connector

Plug-in systemMINI COMBICON

Screw threadM2

Lockingwithout

Connection methodScrew connection with tensio...

Conductor cross section, flexible, with ferrule, with plastic sleeve0.25 mm² ... 0.5 mm²

Stripping length7 mm

Housing colorgreen (6021)

Flammability rating according to UL 94V0

Length [ l ]16.1 mm

Height (without solder pin)11.1 mm

Ambient temperature (operation)-40 °C ... 100 °C (dependent...

Test for conductor damage and slackeningIEC 60999-1:1999-11

Insertion and withdrawal forceIEC 60512-13-2:2006-02

Minimum clearance - inhomogeneous field (III/3)1.5 mm

Minimum creepage distance value (III/3)2 mm

Impulse withstand voltage at sea level2.95 kV

Cold stress-40 °C/2 h

ECLASS 5.027260700

ETIM 6.0EC002638

UNSPSC 1139121409

UNSPSC 19.039121409

UNSPSC 18.039121409

Cylindrical gauge a x b / diameter2.4 mm x 1.5 mm / 1.6 mm

Contact materialCu alloy

Insulating material groupI

CTI according to IEC 60112600

Type of packagingpacked in cardboard

Ambient temperature (storage/transport)-40 °C ... 70 °C

Conductor cross section / conductor type / tensile force0.14 mm² / solid / > 7 N

Resistance of inscriptionsIEC 60068-2-70:1995-12

Insertion strength per pos. approx.6 N

Test force per pos.21 N

Minimum clearance - inhomogeneous field (III/2)1.5 mm

Minimum creepage distance value (III/2)1.5 mm

Contact holder in insert requirements >20 NTest passed

Corrosive stress0.2 dm3 SO2 on 300 dm3/40 °C...

Upper limiting temperature requirements <100 °CTest passed

Power-frequency withstand voltage1.39 kV

ETIM 4.0EC002638

ECLASS 9.027440309

UNSPSC 7.090139121409

ECLASS 10.0.127440309

ECLASS 4.027260700

ECLASS 6.027260700

UNSPSC 6.0130211810

UNSPSC 12.0139121409

Conductor cross section solid max.-

Min. AWG conductor cross section, flexible-

2 conductors with same cross section, solid max.-

Two conductors with the same cross section, flexible, with TWIN ferrules, with plastic sleeve, minimum-

Operating temperature-

Tightening torque max-

Conductor cross section solid min.-

Conductor cross section flexible max.-

Conductor cross section flexible, with ferrule with plastic sleeve min.-

2 conductors with same cross section, stranded max.-

Max. AWG conductor cross section, flexible-

2 conductors with same cross section, stranded min.-

Two conductors with the same cross section stranded, with ferrule and without plastic sleeve, maximum-

Ambient temperature (actuation)-

Permissible humidity (storage/transport)-

Conductor cross section AWG max.-

Conductor cross section flexible, with ferrule without plastic sleeve max.-

Internal cylindrical gage-

Two conductors with the same cross section stranded, with ferrule and without plastic sleeve, minimum-

Maximum load current-

Connection in acc. with standard-

Conductor cross section flexible, with ferrule with plastic sleeve max.-

Two conductors with the same cross section, flexible, with TWIN ferrules, with plastic sleeve, maximum-

Open side panel-

Finger protection-

Result of tight fit on support-

Short circuit stability result-

Rated surge voltage-

Result of surge voltage test-

Tensile test result-

Tight fit on carrier-

Conductor cross section short circuit testing-

Nominal voltage UN-

Power frequency withstand voltage setpoint-

Bending test turns-

Short-time current-

Proof of thermal characteristics (needle flame) effective duration-

Degree of pollution-

Shock protection test specification-

Result of flexion and pull-out test-

Overvoltage category-

Result of the test for mechanical stability of terminal points (5 x conductor connection)-

Setpoint-

Color-

Result of temperature-rise test-

Result of voltage-drop test-

Area of application-

End cover width-

Back of the hand protection-

Potentials-

Nominal cross section-

Acceleration-

Bending test conductor cross section/weight-

Test specification, oscillation, broadband noise-

Shock form-

Number of shocks per direction-

Calorimetric heat release NFPA 130 (ASTM E 1354)-

Result of power-frequency withstand voltage test-

Test directions-

Test specification, shock test-

Specific optical density of smoke NFPA 130 (ASTM E 662)-

Fire protection for rail vehicles (DIN EN 45545-2) R22-

Length-

Fire protection for rail vehicles (DIN EN 45545-2) R23-

Height NS 35/7,5-

Oscillation, broadband noise test result-

Test spectrum-

Relative insulation material temperature index (Elec., UL 746 B)-

Smoke gas toxicity NFPA 130 (SMP 800C)-

Conductor cross section flexible min.-

Bending test rotation speed-

Conductor cross section AWG min.-

Conductor cross section flexible, with ferrule without plastic sleeve min.-

Shock test result-

Shock duration-

Surface flammability NFPA 130 (ASTM E 162)-

Width-

Tightening torque, min-

2 conductors with same cross section, solid min.-

Maximum power dissipation for nominal condition-

Requirement temperature-rise test-

Result of thermal test-

Test frequency-

Static insulating material application in cold-

Fire protection for rail vehicles (DIN EN 45545-2) R26-

Height-

Nominal current IN-

Test duration per axis-

Fire protection for rail vehicles (DIN EN 45545-2) R24-

Height NS 35/15-

ETIM 2.0-

ASD level-

Temperature index of insulation material (DIN EN 60216-1 (VDE 0304-21))-

3044102
94 in stock
3044102
Phoenix Contact

Feed-through terminal block, nom. voltage: 1000 V, nominal current: 32 A, connection method: Screw c...

Number of connections2

Rated voltage (II/2)-

Rated voltage (III/3)-

Conductor cross section solid-

Nom. voltage-

Rated surge voltage (II/2)-

Side guide rails-

Nominal current-

Rated surge voltage (III/3)-

pluggable-

Rated voltage (III/2)-

Insulating materialPA

Number of positions-

Number of potentials-

Conductor cross section flexible, with ferrule without plastic sleeve-

2 conductors with same cross section, flexible-

2 conductors with the same cross section, flexible, with TWIN ferrule with plastic sleeve-

Torque-

Caption-

Height [ h ]-

Pull-out test-

No. of cycles-

Polarization and coding-

Minimum clearance - inhomogeneous field (II/2)-

Note on connection cross section-

Contact resistance R1-

Range of articles-

Conductor cross section flexible-

Pitch-

Drive form screw head-

Conductor cross section AWG / kcmil-

2 conductors with same cross section, flexible, with ferrule without plastic sleeve-

Metal surface terminal point (top layer)-

Metal surface contact area (top layer)-

Glow wire flammability index GWFI according to EN 60695-2-12-

Width [ w ]-

Ambient temperature (assembly)-5 °C ... 70 °C

Dimension check-

Withdraw strength per pos. approx.-

Clearances and creepage distances-

Specification-

Insertion/withdrawal cycles-

Thermal stress-

China RoHSEnvironmentally Friendly Use...

ECLASS 11.027141120

ECLASS 7.027141120

ETIM 3.0EC000897

UNSPSC 20.039121410

Type of contact-

Number of levels1

Rated surge voltage (III/2)-

2 conductors with same cross section, solid-

NoteNote: Product releases, conn...

Surface characteristics-

Glow wire ignition temperature GWIT according to EN 60695-2-13-

Temperature for the ball pressure test according to EN 60695-10-2-

Pieces per package-

Denomination packing units-

Test specification-

Visual inspection-

Contact holder in insert-

Minimum creepage distance value (II/2)-

Polarization when inserted requirement >20 N-

Contact resistance R2-

Result, degree of protection, IP code-

ECLASS 4.127141100

ECLASS 5.127141100

ETIM 7.0EC000897

UNSPSC 13.239121410

UNSPSC 21.039121410

Brief article description-

Plug-in system-

Screw threadM3

Locking-

Connection methodScrew connection

Conductor cross section, flexible, with ferrule, with plastic sleeve-

Stripping length9 mm

Housing color-

Flammability rating according to UL 94V0

Length [ l ]-

Height (without solder pin)-

Ambient temperature (operation)-

Test for conductor damage and slackening-

Insertion and withdrawal force-

Minimum clearance - inhomogeneous field (III/3)-

Minimum creepage distance value (III/3)-

Impulse withstand voltage at sea level-

Cold stress-

ECLASS 5.027141100

ETIM 6.0EC000897

UNSPSC 1139121410

UNSPSC 19.039121410

UNSPSC 18.039121410

Cylindrical gauge a x b / diameter-

Contact material-

Insulating material groupI

CTI according to IEC 60112-

Type of packaging-

Ambient temperature (storage/transport)-25 °C ... 60 °C (for a shor...

Conductor cross section / conductor type / tensile force-

Resistance of inscriptions-

Insertion strength per pos. approx.-

Test force per pos.-

Minimum clearance - inhomogeneous field (III/2)-

Minimum creepage distance value (III/2)-

Contact holder in insert requirements >20 N-

Corrosive stress-

Upper limiting temperature requirements <100 °C-

Power-frequency withstand voltage-

ETIM 4.0EC000897

ECLASS 9.027141120

UNSPSC 7.090139121410

ECLASS 10.0.127141120

ECLASS 4.027141100

ECLASS 6.027141100

UNSPSC 6.0130211811

UNSPSC 12.0139121410

Conductor cross section solid max.6 mm²

Min. AWG conductor cross section, flexible26

2 conductors with same cross section, solid max.1.5 mm²

Two conductors with the same cross section, flexible, with TWIN ferrules, with plastic sleeve, minimum0.5 mm²

Operating temperature-60 °C ... 105 °C (max. shor...

Tightening torque max0.8 Nm

Conductor cross section solid min.0.14 mm²

Conductor cross section flexible max.6 mm²

Conductor cross section flexible, with ferrule with plastic sleeve min.0.14 mm²

2 conductors with same cross section, stranded max.1.5 mm²

Max. AWG conductor cross section, flexible10

2 conductors with same cross section, stranded min.0.14 mm²

Two conductors with the same cross section stranded, with ferrule and without plastic sleeve, maximum1.5 mm²

Ambient temperature (actuation)-5 °C ... 70 °C

Permissible humidity (storage/transport)30 % ... 70 %

Conductor cross section AWG max.10

Conductor cross section flexible, with ferrule without plastic sleeve max.4 mm²

Internal cylindrical gageA4

Two conductors with the same cross section stranded, with ferrule and without plastic sleeve, minimum0.14 mm²

Maximum load current41 A (with 6 mm² conductor c...

Connection in acc. with standardCSA

Conductor cross section flexible, with ferrule with plastic sleeve max.4 mm²

Two conductors with the same cross section, flexible, with TWIN ferrules, with plastic sleeve, maximum2.5 mm²

Open side panelYes

Finger protectionguaranteed

Result of tight fit on supportTest passed

Short circuit stability resultTest passed

Rated surge voltage8 kV

Result of surge voltage testTest passed

Tensile test resultTest passed

Tight fit on carrierNS 35

Conductor cross section short circuit testing6 mm²

Nominal voltage UN1000 V

Power frequency withstand voltage setpoint2.2 kV

Bending test turns135

Short-time current0.72 kA

Proof of thermal characteristics (needle flame) effective duration30 s

Degree of pollution3

Shock protection test specificationDIN EN 50274 (VDE 0660-514):...

Result of flexion and pull-out testTest passed

Overvoltage categoryIII

Result of the test for mechanical stability of terminal points (5 x conductor connection)Test passed

Setpoint1 N

Colorgray

Result of temperature-rise testTest passed

Result of voltage-drop testTest passed

Area of applicationRailway industry

End cover width2.2 mm

Back of the hand protectionguaranteed

Potentials1

Nominal cross section4 mm²

Acceleration5g

Bending test conductor cross section/weight0.14 mm² / 0.2 kg

Test specification, oscillation, broadband noiseDIN EN 50155 (VDE 0115-200):...

Shock formHalf-sine

Number of shocks per direction3

Calorimetric heat release NFPA 130 (ASTM E 1354)27,5 MJ/kg

Result of power-frequency withstand voltage testTest passed

Test directionsX-, Y- and Z-axis (pos. and ...

Test specification, shock testDIN EN 50155 (VDE 0115-200):...

Specific optical density of smoke NFPA 130 (ASTM E 662)passed

Fire protection for rail vehicles (DIN EN 45545-2) R22HL 1 - HL 3

Length47.7 mm

Fire protection for rail vehicles (DIN EN 45545-2) R23HL 1 - HL 3

Height NS 35/7,547.5 mm

Oscillation, broadband noise test resultTest passed

Test spectrumService life test category 1...

Relative insulation material temperature index (Elec., UL 746 B)130 °C

Smoke gas toxicity NFPA 130 (SMP 800C)passed

Conductor cross section flexible min.0.14 mm²

Bending test rotation speed10 rpm

Conductor cross section AWG min.26

Conductor cross section flexible, with ferrule without plastic sleeve min.0.14 mm²

Shock test resultTest passed

Shock duration30 ms

Surface flammability NFPA 130 (ASTM E 162)passed

Width6.2 mm

Tightening torque, min0.6 Nm

2 conductors with same cross section, solid min.0.14 mm²

Maximum power dissipation for nominal condition1.02 W

Requirement temperature-rise testIncrease in temperature ≤ 45...

Result of thermal testTest passed

Test frequencyf1 = 5 Hz to f2 = 150 Hz

Static insulating material application in cold-60 °C

Fire protection for rail vehicles (DIN EN 45545-2) R26HL 1 - HL 3

Height46.9 mm

Nominal current IN32 A (with 4 mm² conductor c...

Test duration per axis5 h

Fire protection for rail vehicles (DIN EN 45545-2) R24HL 1 - HL 3

Height NS 35/1555 mm

ETIM 2.0EC000897

ASD level1.857 (m/s2)2/Hz

Temperature index of insulation material (DIN EN 60216-1 (VDE 0304-21))125 °C

3045075
13 in stock
3045075
Phoenix Contact

Feed-through terminal block, nom. voltage: 1000 V, nominal current: 24 A, connection method: Screw c...

Number of connections2

Rated voltage (II/2)-

Rated voltage (III/3)-

Conductor cross section solid-

Nom. voltage-

Rated surge voltage (II/2)-

Side guide rails-

Nominal current-

Rated surge voltage (III/3)-

pluggable-

Rated voltage (III/2)-

Insulating materialPA

Number of positions-

Number of potentials-

Conductor cross section flexible, with ferrule without plastic sleeve-

2 conductors with same cross section, flexible-

2 conductors with the same cross section, flexible, with TWIN ferrule with plastic sleeve-

Torque-

Caption-

Height [ h ]-

Pull-out test-

No. of cycles-

Polarization and coding-

Minimum clearance - inhomogeneous field (II/2)-

Note on connection cross section-

Contact resistance R1-

Range of articles-

Conductor cross section flexible-

Pitch-

Drive form screw head-

Conductor cross section AWG / kcmil-

2 conductors with same cross section, flexible, with ferrule without plastic sleeve-

Metal surface terminal point (top layer)-

Metal surface contact area (top layer)-

Glow wire flammability index GWFI according to EN 60695-2-12-

Width [ w ]-

Ambient temperature (assembly)-5 °C ... 70 °C

Dimension check-

Withdraw strength per pos. approx.-

Clearances and creepage distances-

Specification-

Insertion/withdrawal cycles-

Thermal stress-

China RoHSEnvironmentally Friendly Use...

ECLASS 11.027141120

ECLASS 7.027141120

ETIM 3.0EC000897

UNSPSC 20.039121410

Type of contact-

Number of levels1

Rated surge voltage (III/2)-

2 conductors with same cross section, solid-

NoteNote: Product releases, conn...

Surface characteristics-

Glow wire ignition temperature GWIT according to EN 60695-2-13-

Temperature for the ball pressure test according to EN 60695-10-2-

Pieces per package-

Denomination packing units-

Test specification-

Visual inspection-

Contact holder in insert-

Minimum creepage distance value (II/2)-

Polarization when inserted requirement >20 N-

Contact resistance R2-

Result, degree of protection, IP code-

ECLASS 4.127141100

ECLASS 5.127141100

ETIM 7.0EC000897

UNSPSC 13.239121410

UNSPSC 21.039121410

Brief article description-

Plug-in system-

Screw threadM3

Locking-

Connection methodScrew connection

Conductor cross section, flexible, with ferrule, with plastic sleeve-

Stripping length9 mm

Housing color-

Flammability rating according to UL 94V0

Length [ l ]-

Height (without solder pin)-

Ambient temperature (operation)-

Test for conductor damage and slackening-

Insertion and withdrawal force-

Minimum clearance - inhomogeneous field (III/3)-

Minimum creepage distance value (III/3)-

Impulse withstand voltage at sea level-

Cold stress-

ECLASS 5.027141100

ETIM 6.0EC000897

UNSPSC 1139121410

UNSPSC 19.039121410

UNSPSC 18.039121410

Cylindrical gauge a x b / diameter-

Contact material-

Insulating material groupI

CTI according to IEC 60112-

Type of packaging-

Ambient temperature (storage/transport)-25 °C ... 60 °C (for a shor...

Conductor cross section / conductor type / tensile force-

Resistance of inscriptions-

Insertion strength per pos. approx.-

Test force per pos.-

Minimum clearance - inhomogeneous field (III/2)-

Minimum creepage distance value (III/2)-

Contact holder in insert requirements >20 N-

Corrosive stress-

Upper limiting temperature requirements <100 °C-

Power-frequency withstand voltage-

ETIM 4.0EC000897

ECLASS 9.027141120

UNSPSC 7.090139121410

ECLASS 10.0.127141120

ECLASS 4.027141100

ECLASS 6.027141100

UNSPSC 6.0130211811

UNSPSC 12.0139121410

Conductor cross section solid max.4 mm²

Min. AWG conductor cross section, flexible26

2 conductors with same cross section, solid max.1.5 mm²

Two conductors with the same cross section, flexible, with TWIN ferrules, with plastic sleeve, minimum0.5 mm²

Operating temperature-60 °C ... 105 °C (max. shor...

Tightening torque max0.6 Nm

Conductor cross section solid min.0.14 mm²

Conductor cross section flexible max.2.5 mm²

Conductor cross section flexible, with ferrule with plastic sleeve min.0.14 mm²

2 conductors with same cross section, stranded max.1.5 mm²

Max. AWG conductor cross section, flexible12

2 conductors with same cross section, stranded min.0.14 mm²

Two conductors with the same cross section stranded, with ferrule and without plastic sleeve, maximum1.5 mm²

Ambient temperature (actuation)-5 °C ... 70 °C

Permissible humidity (storage/transport)30 % ... 70 %

Conductor cross section AWG max.12

Conductor cross section flexible, with ferrule without plastic sleeve max.2.5 mm²

Internal cylindrical gageA3

Two conductors with the same cross section stranded, with ferrule and without plastic sleeve, minimum0.14 mm²

Maximum load current32 A (with 4 mm² conductor c...

Connection in acc. with standardCSA

Conductor cross section flexible, with ferrule with plastic sleeve max.2.5 mm²

Two conductors with the same cross section, flexible, with TWIN ferrules, with plastic sleeve, maximum1.5 mm²

Open side panelYes

Finger protectionguaranteed

Result of tight fit on supportTest passed

Short circuit stability resultTest passed

Rated surge voltage8 kV

Result of surge voltage testTest passed

Tensile test resultTest passed

Tight fit on carrierNS 35

Conductor cross section short circuit testing4 mm²

Nominal voltage UN1000 V

Power frequency withstand voltage setpoint2.2 kV

Bending test turns135

Short-time current0.48 kA

Proof of thermal characteristics (needle flame) effective duration30 s

Degree of pollution3

Shock protection test specificationDIN EN 50274 (VDE 0660-514):...

Result of flexion and pull-out testTest passed

Overvoltage categoryIII

Result of the test for mechanical stability of terminal points (5 x conductor connection)Test passed

Setpoint1 N

Colorwhite

Result of temperature-rise testTest passed

Result of voltage-drop testTest passed

Area of applicationRailway industry

End cover width2.2 mm

Back of the hand protectionguaranteed

Potentials1

Nominal cross section2.5 mm²

Acceleration5g

Bending test conductor cross section/weight0.14 mm² / 0.2 kg

Test specification, oscillation, broadband noiseDIN EN 50155 (VDE 0115-200):...

Shock formHalf-sine

Number of shocks per direction3

Calorimetric heat release NFPA 130 (ASTM E 1354)-

Result of power-frequency withstand voltage testTest passed

Test directionsX-, Y- and Z-axis (pos. and ...

Test specification, shock testDIN EN 50155 (VDE 0115-200):...

Specific optical density of smoke NFPA 130 (ASTM E 662)-

Fire protection for rail vehicles (DIN EN 45545-2) R22-

Length47.7 mm

Fire protection for rail vehicles (DIN EN 45545-2) R23-

Height NS 35/7,547.5 mm

Oscillation, broadband noise test resultTest passed

Test spectrumService life test category 1...

Relative insulation material temperature index (Elec., UL 746 B)130 °C

Smoke gas toxicity NFPA 130 (SMP 800C)-

Conductor cross section flexible min.0.14 mm²

Bending test rotation speed10 rpm

Conductor cross section AWG min.26

Conductor cross section flexible, with ferrule without plastic sleeve min.0.14 mm²

Shock test resultTest passed

Shock duration30 ms

Surface flammability NFPA 130 (ASTM E 162)-

Width5.2 mm

Tightening torque, min0.5 Nm

2 conductors with same cross section, solid min.0.14 mm²

Maximum power dissipation for nominal condition0.77 W

Requirement temperature-rise testIncrease in temperature ≤ 45...

Result of thermal testTest passed

Test frequencyf1 = 5 Hz to f2 = 150 Hz

Static insulating material application in cold-60 °C

Fire protection for rail vehicles (DIN EN 45545-2) R26-

Height-

Nominal current IN24 A

Test duration per axis5 h

Fire protection for rail vehicles (DIN EN 45545-2) R24-

Height NS 35/1555 mm

ETIM 2.0EC000897

ASD level1.857 (m/s2)2/Hz

Temperature index of insulation material (DIN EN 60216-1 (VDE 0304-21))125 °C

About the manufacturer

Phoenix Contact

Powermatic Associates is an authorized Phoenix Contact distributor, proudly offering a wide array of innovative industrial solutions that cater to modern technological demands. Phoenix Contact is a global leader renowned for its high-quality products in the fields of electrical engineering and automation technology. Their extensive catalog encompasses everything from connection technology, interface systems, and surge protection to automation software and control technology, making them a versatile choice for various industrial applications. At Powermatic Associates, we deliver Phoenix Contact’s pioneering connectivity and power management solutions, which include terminal blocks, connectors, relays, and PLCs. These components are essential for creating efficient and reliable electrical connections in diverse environments, ensuring seamless system integration. The company's comprehensive range of Industrial Internet of Things (IIoT) solutions facilitates intelligent networking, enabling customers to optimize their automation processes with cutting-edge technology. Phoenix Contact's emphasis on sustainability and innovation reflects in their energy management systems and renewable energy solutions. By incorporating these into your operations, you not only enhance efficiency but also contribute to sustainable practices, aligning with modern environmental standards. Powermatic Associates recognizes the significance of such advancements and partners with Phoenix Contact to provide expert engineering support and tailored solutions, helping you implement smart technologies that drive productivity and minimize costs. With a focus on safety and reliability, Phoenix Contact offers advanced surge protection devices and signal conditioners that safeguard your equipment against voltage spikes and ensure data integrity. In collaboration with Powermatic Associates, customers gain access to robust technical support and consultation, ensuring that every project benefits from personalized guidance and quick resolution of technical challenges. Our partnership extends the reach of Phoenix Contact’s globally recognized industrial automation products, including Human Machine Interfaces (HMIs) and Ethernet switches, empowering businesses with enhanced operational control and communication capabilities. Customers can trust Powermatic Associates to deliver prompt shipping and thorough assistance, ensuring that Phoenix Contact’s top-tier products are seamlessly integrated into their workflows for optimal performance.

About the Product Category

Instruments for measuring and monitoring electricity are essential tools for maintaining the safety and efficiency of electrical systems. These include devices such as multimeters and megohmmeters, which are used to measure aspects like voltage, current, resistance, and insulation resistance. These tools are crucial for tasks like maintenance, troubleshooting, and meeting safety standards in a range of applications.

Electrical Measuring & Monitoring Instruments

Recently viewed products

Relevant products

FAQ

3 in stock

PCB connector, nominal cross section: 1.5 mm², color: green, nominal current: 8 A, rated voltage (III/2): 160 V, contact surface: Tin, type of contact: Female connector, Number of potentials: 5, Number of rows: 1, Number of positions per row: 5, number of

What can I help you find today?

Recommended parts