5255442 Festo Servo Motors
Part#:5255442
Manufacturer:Festo
Alt. Part#:EMMT-AS-80-L-LS-RM
Product Lifecycle:Active
Get a quick Quote!
servo motor EMMT-AS-80-L-LS-RM Ambient temperature: -15 - 40 °C, Note on ambient temperature: up to 80°C with derating -1.5%/°C, Max. installation height: 4000 m, Note on max. installation height: As of 1,000 m, only with derating of -1.0% per 100 m, Stor
About the manufacturer: Festo is one of the manufacturers that offers Servo Motors that you can order at Powermatic Associates site. Festo Corp. has been a top supplier of automation and intelligent automation solutions for more than four decades in the United States and eight decades globally. The company is committed to transforming the manufacturing sector and enhancing business efficiency.
Check out the 5255442 Festo price in the box on the right side or send a quick quote.
Product Details
- Mounting position Any
- Note on degree of protection IP40 for motor shaft without rotary shaft seal IP67 for motor housing, incl. connection technology
- Vibration resistance Transport application test with severity level 2 as per FN 942017-4 and EN 60068-2-6
- Certificate issuing authority UL E342973
- Storage lifetime, under nominal conditions 20000 h
- Rotor position encoder for DC operating voltage range 3.6 V ... 14 V
- Rotor position encoder system accuracy angle measurement -120 arcsec ... 120 arcsec
- MTTF, subcomponent 190 years, rotor position sensor
- Conforms to standard IEC 60034
- Detent torque < 1.0% of peak torque
- Rotor position sensor for manufacturer designation EQI 1131
- Contamination level 2
- Measuring flange 250 x 250 x 15 mm, steel
- Rotor position encoder for DC operating voltage 5 V
- Winding longitudinal inductivity Ld (phase) 3.1 mH
- Standstill torque constant 0.6 Nm/A
- Thermal time constant 48 min
- Temperature monitoring Digital motor temperature transmission via EnDat® 2.2
- Motor constants 0.53 Nm/A
- Rotor position sensor resolution 19 bit
- Voltage constant, phase-to-phase 36 mVmin
- Rating class according to EN 60034-1 S1
- Ambient temperature -15 °C ... 40 °C
- Peak torque 9.9 Nm
- MTTFd, subcomponent 380 years, rotor position sensor
- Shock resistance Shock test with severity level 2 as per FN 942017-5 and EN 60068-2-27
- Information on max. installation height with 1,000 m and longer only with derating of -1.0% per 100 m
- Balancing quality G 2.5
- Max. winding temperature 155 °C
- Cross inductivity Lq (phase) 3.9 mH
- Rotor position encoder for positional values per revolution 524288
- Rotor position sensor interface EnDat® 22
- Nominal rotary speed 3000 1/min
- Nominal operating voltage DC 325 V
- Peak current 27.3 A
- CE marking (see declaration of conformity) As per EU EMC directive As per EU RoHS directive
- Storage temperature -20 °C ... 70 °C
- Thermal class according to EN 60034-1 F
- Permissible axial shaft load 120 N
- Interface code, motor out 80P
- Electrical connection 1, connection technology M23x1
- Concentricity, coaxiality, axial runout according to DIN SPEC 42955 N
- Motor type as per EN 60034-7 IM B5 IM V3
- Max. installation height 4000 m
- Electric time constant 6.9 ms
- Rotor position encoder for absolutely detectable revolutions 4096
- Type code EMMT-AS
- Rotor position sensor measuring principle Inductive
- Continuous stall current 6.7 A
- Phase-phase winding resistance 1.13 Ohm
- Motor nominal power 910 W
- Corrosion resistance class (CRC) 0 - No corrosion stress
- Relative air humidity 0 - 90 %
- Nominal torque 2.9 Nm
- Stall torque 3.5 Nm
- Product weight 3290 g
- Electrical connection 1, connection type Hybrid plug
- Electrical connection for input 1, connection pattern 00995913
- Note on ambient temperature Up to 80 °C with derating of -1.5% per degree Celsius
- Electrical connection 1, number of pins/wires 15
- Number of pole pairs 5
- Max. mechanical speed 14000 1/min
- Thermal resistance 0.68 K/W
- Rotor position sensor Absolute encoder, multi-turn
- Max. rotational speed 6400 1/min
- Motor nominal current 5.5 A
- Type of winding switch Star inside
- Winding inductance phase-phase 5.2 mH
- Degree of protection IP40
- Certification RCM compliance mark c UL us - Recognized (OL)
- Total output inertia moment 2.21 kgcm²
- Permissible radial shaft load 620 N
- Note on materials Contains paint-wetting impairment substances RoHS-compliant
Product condition
New Factory Sealed
New Factory Sealed - New condition, never used, original OEM part with original packaging and factory seal.
Related documents 5255442 Specs
Manufacturer warranty
Request a quote, and we will send you price and availability within minutes.
Select Qty:
Average response time: 11 minutes
Worldwide Shipping and Delivery
Secure Payment Processing
Warranty
Responsive Customer Support
Got Questions? We've Got Answers!
Need more details?
Feel free to chat with us
What can I help you find today?
