T30SN6RE

Banner

Product Lifecycle: Active

Banner Engineering T30SN6RE is a photo-electric sensor from the T30 series, designed with a through-beam system or opposed mode. This sensor features a thermoplastic housing and is pre-wired with a 6.5ft / 2m cable terminated with bare end flying leads. It operates on a supply voltage of 10Vdc-30Vdc, with 12Vdc / 24Vdc being nominal. The T30SN6RE can function within an ambient air temperature range of -40 to +70°C and offers a degree of protection rated at IP69K NEMA 6P. Its shape is an M30 cylindrical threaded/barrel, and it includes 1 x digital output (NPN transistor). The sensing distance of this sensor is 60m, and it utilizes infrared (IR) light with a response time of 3ms / 0.003 s. It supports both Light-ON and Dark-ON operating modes, and the thread size is M30.

T30SN6RE

Banner Engineering T30SN6RE is a photo-electric sensor from the T30 series, designed with a through-beam system or opposed mode. This sensor features a thermoplastic housing and is pre-wired with a 6.5ft / 2m cable terminated with bare end flying leads. It operates on a supply voltage of 10Vdc-30Vdc, with 12Vdc / 24Vdc being nominal. The T30SN6RE can function within an ambient air temperature range of -40 to +70°C and offers a degree of protection rated at IP69K NEMA 6P. Its shape is an M30 cylindrical threaded/barrel, and it includes 1 x digital output (NPN transistor). The sensing distance of this sensor is 60m, and it utilizes infrared (IR) light with a response time of 3ms / 0.003 s. It supports both Light-ON and Dark-ON operating modes, and the thread size is M30.

Product details

IO LinkNo
DeviceNetNo
Feature: Health/ Marginal Signal OutputYes
Feature: Chemical ResistantNo
Feature: AudibleNo
Feature: Hazardous AreaNo

Feature: EncapsulatedYes

Feature: Ecolab CertifiedYes

Feature: Timing (Hold/Delay)No

Feature: Washdown RatedYes

Opposed Mode Emitter/ReceiverPair

Barrel Diameter (mm)30

AdjustmentsN/A

IndicatorLEDs

Lens MaterialAcrylic

Max Op. Relative Humidity [%]90% @ 50°C

Repeatability (µs)375

NEMA RatingNEMA 6P

IP RatingIP69

Number of Pins4

Delay at Power-up (ms)100

Special Feature: Water DetectionNo

Special Feature: Intrinsically SafeNo

Special Feature: Remote TeachNo

Output response time (ms)3 ON/1.5 OFF

Min Op. Temp. (°C)-40

Max Op. Temp. (°C)70

OperationLight/Dark Operate

OutputsNPN

Quick Disconnect TypeNo QD

ConnectionCable

Power Supply/Supply Voltage10-30 V dc

Max Sensing Distance (mm)60000

Primary Housing MaterialThermoplastic

Sensing Mode (Detailed)Emitter/Receiver Pair

Input/OutputDiscrete

Sensing Mode (General)Opposed

Housing StyleBarrel

PowerDC

Sensing BeamInfrared LED

Cable Length (m)2

Primary brandBanner Engineering

Main functionSensor (Photo-electric)

Product series / family nameEZ-BEAM series

Thread sizeM30

Materialthermoplastic housing

Light ColorInfrared (IR)

Connection typePre-wired with 6.5ft / 2m cable terminated with bare end flying leads

Ambient air temperature for operation-40...+70 °C

Sub-range nameT30 series

Designthrough-beam system / opposed mode

Digital outputs1 x digital output (NPN transistor)

Response time3ms / 0.003 s

Supply voltage (DC)10Vdc-30Vdc (12Vdc / 24Vdc nom.)

Sensing distance60m

Degree of protectionIP67 NEMA 6P

Compliant with standard(s)cULus cCSAus CE

FunctionsPhoto-electric emitter + receiver sensor pair green LED (power ON) yellow LED (output state)

ShapeCylindrical threaded/barrel

Operating modeLight-ON Dark-ON

Order code / Manufacturer SKU37068

Get a quick quote

Select Qty:

Average response time:

11 minutes

This part can ship within 24h!

Fast worldwide Shipping and Delivery

Shipping cost will be calculated during checkout

Payments methods

Secure Payment Processing
with money back guarantee

1 year warranty on all parts

Responsive Customer Support
with personalized assistance

Need more details?

Feel free to chat with us.

Relevant products

SI-HG63FQDL

Banner Engineering SI-HG63FQDL is a door switch from the SI-HG63 series, designed as a 270° hinge motion switch that is mounted on the left. This safety interlock switch hinge features a thermoplastic housing with a stainless steel hinge. It comes pre-equipped with a 6-pin Euro-style M12 connector for connectivity. The switch includes 1NO+2NC contacts for operation, with an ambient air temperature range for operation between -25 and +70 °C. It offers a degree of protection rated at IP67, with 1 Normally Open (NO) auxiliary contact and 2 Normally Closed (NC) auxiliary contacts.

SM312LVAGQDP

Banner Engineering SM312LVAGQDP is a polarized photo-electric sensor from the SM312 series, designed in a retro-reflective mode with potentiometer adjustment. It features a thermoplastic housing with an acrylic lens and is pre-wired with a 6" / 150mm pigtail terminated with a 4-pin Euro-style M12 connector. This sensor operates on a supply voltage of 10Vdc-30Vdc (12Vdc / 24Vdc nom.) and can be mounted using an M18 threaded mount. It is designed to operate within an ambient air temperature range of -20 to +70°C and offers a degree of protection rated at IP67, NEMA 1, NEMA 2, NEMA 3, NEMA 3S, NEMA 4, NEMA 4X, NEMA 6, NEMA 12. The rectangular-shaped sensor provides 1 x digital output (PNP/NPN transistor), has a sensing distance of 55mm to 2m, emits visible red light, and has a response time of 1ms / 0.001 s. It supports both Light-ON and Dark-ON operating modes.

This item can ship within 24h!

T30AW3FF600Q1

Banner Engineering T30AW3FF600Q1 is a fixed-field photo-electric sensor from the T30 series, designed with a background suppression system. This sensor features a thermoplastic housing and is pre-equipped with a 4-pin 1/2" micro connector for connectivity. It operates on a supply voltage range of 20Vac-250Vac (with nominal voltages of 200Vac, 220Vac, and 240Vac) and can function within an ambient air temperature range of -40 to +70°C. The T30AW3FF600Q1 offers a degree of protection rated at IP69K NEMA 6P, making it suitable for demanding environments. Its M30 cylindrical threaded/barrel shape facilitates easy installation. The sensor provides one digital output (Solid-state AC output; SPST contact type) and has a sensing distance of 600mm. It utilizes infrared light with a wavelength of 880 nm and has a response time of 16ms (0.016 s). The operating mode for this sensor is Light-ON.

BT13S

Banner Engineering BT13S, part of the Glass fiber series, is a fiber optic sensor designed with a diffuse-reflective system and bifurcated fiber in-line sensing. It features a brass sensing end, glass fiber, and a stainless steel monocoil construction. The sensor has a 1.6mm fiber core diameter and comes in a cylindrical shape with a threaded end tip. It measures 3ft or 910mm in length. This sensor is capable of operating in ambient air temperatures up to +249°C.

QDE2R4-825D

Banner Engineering QDE2R4-825D is a pre-assembled cable/cordset designed for various automation applications. It features a single-ended design with a 5.5mm diameter PVC cable and a 5-pin Euro-style M12 male connector to bare end flying leads. This cable operates effectively within an ambient air temperature range of -40 to +105°C. It offers a degree of protection rated at IP67, making it suitable for environments where dust and water resistance are necessary. The cable is sheathed in yellow, measures 7.62 meters in length, and is rated for 75Vdc and 60Vac, accommodating a broad range of electrical requirements.

QS18VP6LAFQ5

Banner Engineering QS18VP6LAFQ5 is an adjustable-field Class 1 laser photo-electric sensor designed for precise detection tasks. It operates within an ambient air temperature range of -10 to +50°C and features a background suppression system with screw adjustment for fine-tuning. This sensor is equipped with a pre-wired 6-inch (150mm) pigtail that terminates with a 4-pin Euro-style M12 connector, falling under the QS18..AF mechanically adjustable background suppression series. It boasts a degree of protection rated at IP67 NEMA 6, ensuring durability in various environments. The supply voltage requirement is 10Vdc to 30Vdc, with nominal values at 12Vdc and 24Vdc. Its rectangular shape is constructed from a thermoplastic housing with an acrylic lens, and it has a sensing distance range of 30 to 150mm. The sensor emits a visible red light at a wavelength of 650 nm and offers an operating mode that includes both Light-ON and Dark-ON options. Additionally, it features 1 x digital output (PNP transistor; complementary NO/NC) for versatile connectivity.

SI-HG63FQDL

Banner Engineering SI-HG63FQDL is a door switch from the SI-HG63 series, designed as a 270° hinge motion switch that is mounted on the left. This safety interlock switch hinge features a thermoplastic housing with a stainless steel hinge. It comes pre-equipped with a 6-pin Euro-style M12 connector for connectivity. The switch includes 1NO+2NC contacts for operation, with an ambient air temperature range for operation between -25 and +70 °C. It offers a degree of protection rated at IP67, with 1 Normally Open (NO) auxiliary contact and 2 Normally Closed (NC) auxiliary contacts.

SM312LVAGQDP

Banner Engineering SM312LVAGQDP is a polarized photo-electric sensor from the SM312 series, designed in a retro-reflective mode with potentiometer adjustment. It features a thermoplastic housing with an acrylic lens and is pre-wired with a 6" / 150mm pigtail terminated with a 4-pin Euro-style M12 connector. This sensor operates on a supply voltage of 10Vdc-30Vdc (12Vdc / 24Vdc nom.) and can be mounted using an M18 threaded mount. It is designed to operate within an ambient air temperature range of -20 to +70°C and offers a degree of protection rated at IP67, NEMA 1, NEMA 2, NEMA 3, NEMA 3S, NEMA 4, NEMA 4X, NEMA 6, NEMA 12. The rectangular-shaped sensor provides 1 x digital output (PNP/NPN transistor), has a sensing distance of 55mm to 2m, emits visible red light, and has a response time of 1ms / 0.001 s. It supports both Light-ON and Dark-ON operating modes.

This item can ship within 24h!

T30AW3FF600Q1

Banner Engineering T30AW3FF600Q1 is a fixed-field photo-electric sensor from the T30 series, designed with a background suppression system. This sensor features a thermoplastic housing and is pre-equipped with a 4-pin 1/2" micro connector for connectivity. It operates on a supply voltage range of 20Vac-250Vac (with nominal voltages of 200Vac, 220Vac, and 240Vac) and can function within an ambient air temperature range of -40 to +70°C. The T30AW3FF600Q1 offers a degree of protection rated at IP69K NEMA 6P, making it suitable for demanding environments. Its M30 cylindrical threaded/barrel shape facilitates easy installation. The sensor provides one digital output (Solid-state AC output; SPST contact type) and has a sensing distance of 600mm. It utilizes infrared light with a wavelength of 880 nm and has a response time of 16ms (0.016 s). The operating mode for this sensor is Light-ON.

BT13S

Banner Engineering BT13S, part of the Glass fiber series, is a fiber optic sensor designed with a diffuse-reflective system and bifurcated fiber in-line sensing. It features a brass sensing end, glass fiber, and a stainless steel monocoil construction. The sensor has a 1.6mm fiber core diameter and comes in a cylindrical shape with a threaded end tip. It measures 3ft or 910mm in length. This sensor is capable of operating in ambient air temperatures up to +249°C.

QDE2R4-825D

Banner Engineering QDE2R4-825D is a pre-assembled cable/cordset designed for various automation applications. It features a single-ended design with a 5.5mm diameter PVC cable and a 5-pin Euro-style M12 male connector to bare end flying leads. This cable operates effectively within an ambient air temperature range of -40 to +105°C. It offers a degree of protection rated at IP67, making it suitable for environments where dust and water resistance are necessary. The cable is sheathed in yellow, measures 7.62 meters in length, and is rated for 75Vdc and 60Vac, accommodating a broad range of electrical requirements.

QS18VP6LAFQ5

Banner Engineering QS18VP6LAFQ5 is an adjustable-field Class 1 laser photo-electric sensor designed for precise detection tasks. It operates within an ambient air temperature range of -10 to +50°C and features a background suppression system with screw adjustment for fine-tuning. This sensor is equipped with a pre-wired 6-inch (150mm) pigtail that terminates with a 4-pin Euro-style M12 connector, falling under the QS18..AF mechanically adjustable background suppression series. It boasts a degree of protection rated at IP67 NEMA 6, ensuring durability in various environments. The supply voltage requirement is 10Vdc to 30Vdc, with nominal values at 12Vdc and 24Vdc. Its rectangular shape is constructed from a thermoplastic housing with an acrylic lens, and it has a sensing distance range of 30 to 150mm. The sensor emits a visible red light at a wavelength of 650 nm and offers an operating mode that includes both Light-ON and Dark-ON options. Additionally, it features 1 x digital output (PNP transistor; complementary NO/NC) for versatile connectivity.

SI-HG63FQDL

Banner Engineering SI-HG63FQDL is a door switch from the SI-HG63 series, designed as a 270° hinge motion switch that is mounted on the left. This safety interlock switch hinge features a thermoplastic housing with a stainless steel hinge. It comes pre-equipped with a 6-pin Euro-style M12 connector for connectivity. The switch includes 1NO+2NC contacts for operation, with an ambient air temperature range for operation between -25 and +70 °C. It offers a degree of protection rated at IP67, with 1 Normally Open (NO) auxiliary contact and 2 Normally Closed (NC) auxiliary contacts.

SM312LVAGQDP

Banner Engineering SM312LVAGQDP is a polarized photo-electric sensor from the SM312 series, designed in a retro-reflective mode with potentiometer adjustment. It features a thermoplastic housing with an acrylic lens and is pre-wired with a 6" / 150mm pigtail terminated with a 4-pin Euro-style M12 connector. This sensor operates on a supply voltage of 10Vdc-30Vdc (12Vdc / 24Vdc nom.) and can be mounted using an M18 threaded mount. It is designed to operate within an ambient air temperature range of -20 to +70°C and offers a degree of protection rated at IP67, NEMA 1, NEMA 2, NEMA 3, NEMA 3S, NEMA 4, NEMA 4X, NEMA 6, NEMA 12. The rectangular-shaped sensor provides 1 x digital output (PNP/NPN transistor), has a sensing distance of 55mm to 2m, emits visible red light, and has a response time of 1ms / 0.001 s. It supports both Light-ON and Dark-ON operating modes.

Friendly Powermatic robot

What can I help you find today?