QS30EX W/30

Banner

Product Lifecycle: Active

Banner Engineering QS30EX W/30 is a photo-electric sensor designed for through-beam system applications, functioning as an emitter within the QS30 high-powered receivers series. This part features an M30 threaded mount for secure installation and is equipped with a pre-wired 30ft / 9m cable that terminates with bare end flying leads for easy connection. It operates within an ambient air temperature range of -20 to +60°C and is housed in a thermoplastic Cyclo Olefin Polymers (COP) enclosure, ensuring durability. The QS30EX W/30 offers a sensing distance of up to 213m and utilizes infrared light with a wavelength of 875 nm for detection. It has a response time of 30ms / 0.03 s and is powered by a supply voltage ranging from 10Vdc to 30Vdc, with 12Vdc and 24Vdc as nominal values. This sensor is designed to meet IP67 and NEMA 6P protection standards, making it suitable for challenging environments.

QS30EX W/30

Banner Engineering QS30EX W/30 is a photo-electric sensor designed for through-beam system applications, functioning as an emitter within the QS30 high-powered receivers series. This part features an M30 threaded mount for secure installation and is equipped with a pre-wired 30ft / 9m cable that terminates with bare end flying leads for easy connection. It operates within an ambient air temperature range of -20 to +60°C and is housed in a thermoplastic Cyclo Olefin Polymers (COP) enclosure, ensuring durability. The QS30EX W/30 offers a sensing distance of up to 213m and utilizes infrared light with a wavelength of 875 nm for detection. It has a response time of 30ms / 0.03 s and is powered by a supply voltage ranging from 10Vdc to 30Vdc, with 12Vdc and 24Vdc as nominal values. This sensor is designed to meet IP67 and NEMA 6P protection standards, making it suitable for challenging environments.

WORLD-BEAM QS30 EX/RX High-Power Series -- Datasheet.pdf

QS30EX CABLE.stp

QS30EX CABLE.pdf

Product details

WORLD-BEAM QS30 EX/RX High-Power Series -- Datasheet.pdf

QS30EX CABLE.stp

QS30EX CABLE.pdf

Feature: Chemical ResistantNo
Lens MaterialZeonex
Special Feature: Intrinsically SafeNo
Output response time (ms)30
Sensing Beam Wavelength875
Delay at Power-up (ms)100

Max Op. Temp. (°C)60

Special Feature: Water DetectionNo

Quick Disconnect TypeNo QD

ConnectionCable

Power Supply/Supply Voltage10-30 V dc

Housing StyleRectangular w/M30 Mount

Max Sensing Distance (mm)213000

Min Op. Temp. (°C)-20

Sensing BeamInfrared LED

OutputsN/A

Primary Housing MaterialThermoplastic

Sensing Mode (General)Opposed

Sensing Mode (Detailed)Emitter

PowerDC

IO LinkNo

DeviceNetNo

Feature: AudibleNo

Feature: Hazardous AreaNo

Feature: EncapsulatedYes

Feature: Timing (Hold/Delay)No

Opposed Mode Emitter/ReceiverEmitter

IndicatorLEDs

Barrel Diameter (mm)30

AdjustmentsN/A

Max Op. Relative Humidity [%]95% @ 50°C

NEMA RatingNEMA 6P

Number of Pins4

Repeatability (µs)5000

IP RatingIP67

Special Feature: Remote TeachNo

OperationN/A

Cable Length (m)9

Get a quick quote

Select Qty:

Average response time:

11 minutes

This part can ship within 24h!

Fast worldwide Shipping and Delivery

Shipping cost will be calculated during checkout

Payments methods

Secure Payment Processing
with money back guarantee

1 year warranty on all parts

Responsive Customer Support
with personalized assistance

Need more details?

Feel free to chat with us.

Relevant products

SI-HG63FQDL

Banner Engineering SI-HG63FQDL is a door switch from the SI-HG63 series, designed as a 270° hinge motion switch that is mounted on the left. This safety interlock switch hinge features a thermoplastic housing with a stainless steel hinge. It comes pre-equipped with a 6-pin Euro-style M12 connector for connectivity. The switch includes 1NO+2NC contacts for operation, with an ambient air temperature range for operation between -25 and +70 °C. It offers a degree of protection rated at IP67, with 1 Normally Open (NO) auxiliary contact and 2 Normally Closed (NC) auxiliary contacts.

SM312LVAGQDP

Banner Engineering SM312LVAGQDP is a polarized photo-electric sensor from the SM312 series, designed in a retro-reflective mode with potentiometer adjustment. It features a thermoplastic housing with an acrylic lens and is pre-wired with a 6" / 150mm pigtail terminated with a 4-pin Euro-style M12 connector. This sensor operates on a supply voltage of 10Vdc-30Vdc (12Vdc / 24Vdc nom.) and can be mounted using an M18 threaded mount. It is designed to operate within an ambient air temperature range of -20 to +70°C and offers a degree of protection rated at IP67, NEMA 1, NEMA 2, NEMA 3, NEMA 3S, NEMA 4, NEMA 4X, NEMA 6, NEMA 12. The rectangular-shaped sensor provides 1 x digital output (PNP/NPN transistor), has a sensing distance of 55mm to 2m, emits visible red light, and has a response time of 1ms / 0.001 s. It supports both Light-ON and Dark-ON operating modes.

This item can ship within 24h!

QS30LD-79194

Banner Engineering QS30LD-79194 is a Class 1 laser photo-electric sensor designed for a variety of detection applications. It features a diffuse mode with TEACH mode functionality and is equipped with an M30 threaded mount for secure installation. This sensor operates within an ambient air temperature range of -10 to +50°C and is housed in a thermoplastic casing with an acrylic lens, ensuring durability. It comes pre-wired with a 60" / 1.5m pigtail that terminates with a 4-pin Pico-style M8 connector for easy connection. As part of the QS30 Diffuse-mode Laser sensors series, it offers a sensing distance of 400mm and emits a visible red light with a wavelength of 650 nm. The QS30LD-79194 supports both Light-ON and Dark-ON operating modes and provides a single digital output (PNP/NPN transistor) with a rapid response time of 0.225ms / 0.000225 s. It requires a supply voltage of 10Vdc-30Vdc (12Vdc / 24Vdc nom.) and is protected to IP67 NEMA 6 standards, making it suitable for challenging environments.

BT13S

Banner Engineering BT13S, part of the Glass fiber series, is a fiber optic sensor designed with a diffuse-reflective system and bifurcated fiber in-line sensing. It features a brass sensing end, glass fiber, and a stainless steel monocoil construction. The sensor has a 1.6mm fiber core diameter and comes in a cylindrical shape with a threaded end tip. It measures 3ft or 910mm in length. This sensor is capable of operating in ambient air temperatures up to +249°C.

QDE2R4-825D

Banner Engineering QDE2R4-825D is a pre-assembled cable/cordset designed for various automation applications. It features a single-ended design with a 5.5mm diameter PVC cable and a 5-pin Euro-style M12 male connector to bare end flying leads. This cable operates effectively within an ambient air temperature range of -40 to +105°C. It offers a degree of protection rated at IP67, making it suitable for environments where dust and water resistance are necessary. The cable is sheathed in yellow, measures 7.62 meters in length, and is rated for 75Vdc and 60Vac, accommodating a broad range of electrical requirements.

QS18VP6LAFQ5

Banner Engineering QS18VP6LAFQ5 is an adjustable-field Class 1 laser photo-electric sensor designed for precise detection tasks. It operates within an ambient air temperature range of -10 to +50°C and features a background suppression system with screw adjustment for fine-tuning. This sensor is equipped with a pre-wired 6-inch (150mm) pigtail that terminates with a 4-pin Euro-style M12 connector, falling under the QS18..AF mechanically adjustable background suppression series. It boasts a degree of protection rated at IP67 NEMA 6, ensuring durability in various environments. The supply voltage requirement is 10Vdc to 30Vdc, with nominal values at 12Vdc and 24Vdc. Its rectangular shape is constructed from a thermoplastic housing with an acrylic lens, and it has a sensing distance range of 30 to 150mm. The sensor emits a visible red light at a wavelength of 650 nm and offers an operating mode that includes both Light-ON and Dark-ON options. Additionally, it features 1 x digital output (PNP transistor; complementary NO/NC) for versatile connectivity.

SI-HG63FQDL

Banner Engineering SI-HG63FQDL is a door switch from the SI-HG63 series, designed as a 270° hinge motion switch that is mounted on the left. This safety interlock switch hinge features a thermoplastic housing with a stainless steel hinge. It comes pre-equipped with a 6-pin Euro-style M12 connector for connectivity. The switch includes 1NO+2NC contacts for operation, with an ambient air temperature range for operation between -25 and +70 °C. It offers a degree of protection rated at IP67, with 1 Normally Open (NO) auxiliary contact and 2 Normally Closed (NC) auxiliary contacts.

SM312LVAGQDP

Banner Engineering SM312LVAGQDP is a polarized photo-electric sensor from the SM312 series, designed in a retro-reflective mode with potentiometer adjustment. It features a thermoplastic housing with an acrylic lens and is pre-wired with a 6" / 150mm pigtail terminated with a 4-pin Euro-style M12 connector. This sensor operates on a supply voltage of 10Vdc-30Vdc (12Vdc / 24Vdc nom.) and can be mounted using an M18 threaded mount. It is designed to operate within an ambient air temperature range of -20 to +70°C and offers a degree of protection rated at IP67, NEMA 1, NEMA 2, NEMA 3, NEMA 3S, NEMA 4, NEMA 4X, NEMA 6, NEMA 12. The rectangular-shaped sensor provides 1 x digital output (PNP/NPN transistor), has a sensing distance of 55mm to 2m, emits visible red light, and has a response time of 1ms / 0.001 s. It supports both Light-ON and Dark-ON operating modes.

This item can ship within 24h!

QS30LD-79194

Banner Engineering QS30LD-79194 is a Class 1 laser photo-electric sensor designed for a variety of detection applications. It features a diffuse mode with TEACH mode functionality and is equipped with an M30 threaded mount for secure installation. This sensor operates within an ambient air temperature range of -10 to +50°C and is housed in a thermoplastic casing with an acrylic lens, ensuring durability. It comes pre-wired with a 60" / 1.5m pigtail that terminates with a 4-pin Pico-style M8 connector for easy connection. As part of the QS30 Diffuse-mode Laser sensors series, it offers a sensing distance of 400mm and emits a visible red light with a wavelength of 650 nm. The QS30LD-79194 supports both Light-ON and Dark-ON operating modes and provides a single digital output (PNP/NPN transistor) with a rapid response time of 0.225ms / 0.000225 s. It requires a supply voltage of 10Vdc-30Vdc (12Vdc / 24Vdc nom.) and is protected to IP67 NEMA 6 standards, making it suitable for challenging environments.

BT13S

Banner Engineering BT13S, part of the Glass fiber series, is a fiber optic sensor designed with a diffuse-reflective system and bifurcated fiber in-line sensing. It features a brass sensing end, glass fiber, and a stainless steel monocoil construction. The sensor has a 1.6mm fiber core diameter and comes in a cylindrical shape with a threaded end tip. It measures 3ft or 910mm in length. This sensor is capable of operating in ambient air temperatures up to +249°C.

QDE2R4-825D

Banner Engineering QDE2R4-825D is a pre-assembled cable/cordset designed for various automation applications. It features a single-ended design with a 5.5mm diameter PVC cable and a 5-pin Euro-style M12 male connector to bare end flying leads. This cable operates effectively within an ambient air temperature range of -40 to +105°C. It offers a degree of protection rated at IP67, making it suitable for environments where dust and water resistance are necessary. The cable is sheathed in yellow, measures 7.62 meters in length, and is rated for 75Vdc and 60Vac, accommodating a broad range of electrical requirements.

QS18VP6LAFQ5

Banner Engineering QS18VP6LAFQ5 is an adjustable-field Class 1 laser photo-electric sensor designed for precise detection tasks. It operates within an ambient air temperature range of -10 to +50°C and features a background suppression system with screw adjustment for fine-tuning. This sensor is equipped with a pre-wired 6-inch (150mm) pigtail that terminates with a 4-pin Euro-style M12 connector, falling under the QS18..AF mechanically adjustable background suppression series. It boasts a degree of protection rated at IP67 NEMA 6, ensuring durability in various environments. The supply voltage requirement is 10Vdc to 30Vdc, with nominal values at 12Vdc and 24Vdc. Its rectangular shape is constructed from a thermoplastic housing with an acrylic lens, and it has a sensing distance range of 30 to 150mm. The sensor emits a visible red light at a wavelength of 650 nm and offers an operating mode that includes both Light-ON and Dark-ON options. Additionally, it features 1 x digital output (PNP transistor; complementary NO/NC) for versatile connectivity.

SI-HG63FQDL

Banner Engineering SI-HG63FQDL is a door switch from the SI-HG63 series, designed as a 270° hinge motion switch that is mounted on the left. This safety interlock switch hinge features a thermoplastic housing with a stainless steel hinge. It comes pre-equipped with a 6-pin Euro-style M12 connector for connectivity. The switch includes 1NO+2NC contacts for operation, with an ambient air temperature range for operation between -25 and +70 °C. It offers a degree of protection rated at IP67, with 1 Normally Open (NO) auxiliary contact and 2 Normally Closed (NC) auxiliary contacts.

SM312LVAGQDP

Banner Engineering SM312LVAGQDP is a polarized photo-electric sensor from the SM312 series, designed in a retro-reflective mode with potentiometer adjustment. It features a thermoplastic housing with an acrylic lens and is pre-wired with a 6" / 150mm pigtail terminated with a 4-pin Euro-style M12 connector. This sensor operates on a supply voltage of 10Vdc-30Vdc (12Vdc / 24Vdc nom.) and can be mounted using an M18 threaded mount. It is designed to operate within an ambient air temperature range of -20 to +70°C and offers a degree of protection rated at IP67, NEMA 1, NEMA 2, NEMA 3, NEMA 3S, NEMA 4, NEMA 4X, NEMA 6, NEMA 12. The rectangular-shaped sensor provides 1 x digital output (PNP/NPN transistor), has a sensing distance of 55mm to 2m, emits visible red light, and has a response time of 1ms / 0.001 s. It supports both Light-ON and Dark-ON operating modes.

Friendly Powermatic robot

What can I help you find today?