K30RPT2FBWF2QP-806052 Banner Pick-to-Light Sensors

Banner Engineering K30RPT2FBWF2QP-806052 is a capacitive touch-sensitive pick-to-light component from the EZ-LIGHT series, designed with Gen.2 hygienic features using FDA-grade materials for both its diffused window and housing. This part comes in a gray housing with a dome-shaped window made from FDA-grade polycarbonate and FDA Copolyester, ensuring suitability for environments requiring high standards of cleanliness. It is pre-wired with a 6-inch (15cm) pigtail that terminates with a 5-pin M12 Euro-style quick disconnect (QD) connector. The device operates on a supply voltage range of 12Vdc to 30Vdc, with 24Vdc as the nominal voltage, and can be mounted on a surface, base, or pole flush with a 22mm hole using an M22 thread. The dome has a diameter of 30mm (approximately 1-3/16 inches). It is designed to operate in ambient air temperatures ranging from -40°C to +50°C and offers a high degree of protection with IP67 and IP69K ratings. The operating mode is momentary, with a job light (blue or white) that turns on when one of the two job inputs is active, and touch activates the output only in a normally closed (NC) touch output configuration. It has a current consumption of 55mA, two digital inputs (12-30Vdc; PNP) for job color control, and one digital output (12-30Vdc; PNP) for touch functionality.