Electrical Timers on Powermatic Associates

Finder 11.31.8.230.0000 is a control unit featuring 1 Normally Open (NO) pole with a box-clamp connection type. It has a rated current of 16A at 250Vac (AC-1) and a rated power specified as 1NO / SPST-NO (Single Pole Single Throw - Normally Open). The resistance is noted at 750VA for 230Vac (AC-15), and it can handle various loads including 4000VA at 250Vac (AC-1), 2000W for 230Vac incandescent/halogen lighting, 1000W for fluorescent tubes with electronic ballast, 750W for fluorescent tubes with electromechanical ballast, and 400W for CFL, 230Vac LED, LV halogen, or LED with electronic or electromechanical ballast, with a maximum of 800W for the latter under electromechanical ballast. The supply voltage ranges from 110Vac to 230Vac, accommodating 50Hz/60Hz frequencies. It is designed to operate within an ambient air temperature range of -20 to +50 degrees Celsius and offers a degree of protection classified as C. The rated impulse voltage (Uimp) is 250Vac. The unit's net depth is specified for 1 pole, and it is suitable for DIN rail mounting. The rated power in terms of mechanical endurance is up to 100,000 operations, and the contact material is AgSnO2 (Silver / Tin Oxide).

Schneider Electric REXL4TMJD is an analog timer featuring an ON-delay timer function A, designed for plug-in mounting. It operates with a rated current of 5 A within the REXL sub-range and offers a degree of protection rated at IP50. The contacts are cadmium-free, adhering to environmental safety standards, and are of the 4PDT (4 Pole Double Throw) - 4C/O type. This timer is powered by a DC supply voltage ranging from a minimum of 10.8 V to 12 V. It includes a red LED to indicate output in operation and a yellow LED for power ON status. The electrical durability of this device is rated at 100,000 operations for a 250Vac resistive load and up to 10,000,000 operations uncharacterized by load type. It offers a wide time delay range from 0.1 seconds to 100 hours (0.1 - 360,000 seconds), and can operate within a temperature range of -20°C to +60°C.

Finder 11.91.8.230.0000 is a control unit designed for a supply voltage range of 110Vdc to 230Vdc and 110Vac to 230Vac (50Hz/60Hz) for versatile application. It features a box-clamp connection type and is rated for a current of 16A at 250Vac in AC-1 conditions. The unit offers a rated power of 1C/O or SPDT (Single Pole Double Throw) with a resistance of 750VA at 230Vac in AC-15 conditions, and can handle various loads including 4000VA at 250Vac in AC-1, 2000W for 230Vac incandescent/halogen lighting, 1000W for fluorescent tubes with electronic ballast, 750W for fluorescent tubes with electromechanical ballast, and 400W for CFL, 230Vac LED, LV halogen, or LED with electronic or electromechanical ballast up to 800W. It is designed to operate within an ambient air temperature range of -20 to +50 degrees Celsius and offers a degree of protection classified as C. The rated impulse voltage (Uimp) is specified at 250Vac. The unit's net depth is indicated for 1 Pole(s) installation, and it is suitable for DIN rail mounting. The rated power in terms of mechanical operations is up to 100,000, with contact material specified as AgSnO2 (Silver / Tin Oxide) for durability.

Finder 12.62.8.230.0000 is a time switch with a supply voltage range of 110Vdc to 230Vdc for DC and 110Vac to 230Vac (50Hz/60Hz) for AC. It features a box-clamp connection type and is rated for a current of 16A at 250Vac in AC-1 conditions. The rated power is described as 2C/O or 2 x SPDT (Single Pole Double Throw), with a resistance of 750VA at 230Vac in AC-15 conditions, and up to 4000VA at 250Vac in AC-1 conditions. It supports various loads including 2000W for incandescent/halogen, 1000W for fluorescent tubes with electronic ballast, 750W for fluorescent tubes with electromechanical ballast, and 400W for CFL or 230Vac LED, among others. The ambient air temperature for storage is specified from -20 to +50 degrees Celsius. The degree of protection is listed as C, with a rated impulse voltage (Uimp) of 250Vac and protection functions up to 4 kV. The net depth is indicated for 2 Pole(s), and it is designed for DIN rail mounting. The rated power in terms of mechanical operations is 100,000, with contact material specified as AgSnO2 (Silver / Tin Oxide).

Finder 11.41.8.230.0000 is a control unit featuring a box-clamp connection type and is designed to handle a rated current of 16A at 250Vac in AC-1 applications. It offers a rated power of 1C/O or SPDT (Single Pole Double Throw) with a resistance of 750VA at 230Vac for AC-15 operations. The unit supports various load capacities including 4000VA at 250Vac for AC-1, 2000W for 230Vac incandescent/halogen lighting, 1000W for fluorescent tubes with electronic ballast, 750W for tubes with electromechanical ballast, and 400W for CFL, 230Vac LED, LV halogen, or LED with electronic or electromechanical ballast, with a maximum of 800W for the latter under electromechanical ballast. It is designed for a supply voltage range of 110Vac-230Vac at 50Hz/60Hz, can operate within an ambient air temperature range of -20 to +50 degrees Celsius, and offers a degree of protection classified as C. The rated impulse voltage (Uimp) is specified at 250Vac. The control unit is designed for DIN rail mounting, has a net depth for 1 Pole(s), and is rated for 100,000 operations. The contacts are made of AgSnO2 (Silver / Tin Oxide) for enhanced performance.

Schneider Electric RE88867100 is an analog multi-function timer designed for plug-in mounting with an 8-pin configuration. It features a variety of functions including A, Ac, At, B, C, D, Di, H, Ht, and W, with a reset time of 100ms upon de-energisation. The timer is rated for a current of 8 A and falls under the RE8 sub-range. It offers a degree of protection of IP40 for the housing, IP20 for the terminal block, and IP50 for the front panel. The contacts are made from silver nickel (AgNi) and are cadmium-free, with the housing being self-extinguishing. It operates with a single changeover (SPDT - 1C/O) contact type and has a rated impulse voltage (Uimp) of 5 kV. The supply voltage ranges from a minimum of 10.2 V to 12 V AC/DC. The display features include a green pulsing LED indicator when the relay is energised with no timing in progress (except functions Di-D), a flashing green LED during timing, and a steady green LED when the relay is energised with no timing in progress. It includes 1 Normally Open (NO) pole, offers electrical durability of 100,000 operations at 250Vac for resistive loads and up to 5,000,000 operations. The time delay range is from 0.1 seconds to 1 hour (0.1 - 3600 seconds), and it can operate within a temperature range of -20°C to +60°C.

Finder 12.71.8.230.0000 is a time switch designed for a supply voltage of 230Vdc with a connection type of box-clamp. It has a rated current of 16A at 250Vac for AC-1 and a rated power of 1C/O or SPDT (Single Pole Double Throw). The resistance is specified at 420VA for 230Vac in AC-15, with various rated powers for different types of lighting and loads, including 4000VA for 250Vac in AC-1, 400W for incandescent/halogen at 230Vac, and lower ratings for different types of fluorescent tubes, CFL, and LED lighting. The ambient air temperature for storage is specified for 230Vac at 50Hz/60Hz, with an operational temperature range of -30 to +55°C. It offers a degree of protection classified as C, with a rated impulse voltage of 250Vac and protection functions rated at 4kV. The net depth is indicated for 1 Pole(s), and it is designed for mounting on a DIN rail. The rated power in terms of mechanical operations is 50,000, with contacts made of AgNi (Silver Nickel).

Finder 12.61.8.230.0000 is a time switch designed for a supply voltage range of 110Vdc to 230Vdc and 110Vac to 230Vac (50Hz/60Hz) for AC supply. It features a box-clamp connection type and is rated for a current of 16A at 250Vac in AC-1 conditions. The part offers a rated power of 1C/O or SPDT (Single Pole Double Throw) with a resistance of 750VA at 230Vac in AC-15 conditions, and it can handle various loads including 4000VA at 250Vac for AC-1, 2000W for incandescent/halogen lighting, 1000W for fluorescent tubes with electronic ballast, 750W for fluorescent tubes with electromechanical ballast, and 400W for CFL, 230Vac LED, LV halogen, or LED with electronic ballast, with an increased capacity of 800W for LV halogen or LED with electromechanical ballast. The ambient air temperature suitable for storage ranges from -20 to +50 degrees Celsius. It has a degree of protection classified as C, with a rated impulse voltage of 250Vac and protection functions up to 4 kV. The net depth is specified for 1 Pole(s), and it is designed for DIN rail mounting. The rated power in terms of mechanical operations is 100,000, and the contacts are made of AgSnO2 (Silver / Tin Oxide).

Schneider Electric RE88867300 is an analog multi-function timer designed for plug-in mounting with an 11-pin configuration. It features a variety of functions including A, Ac, At, B, C, D, Di, H, Ht, and W, with a reset time of 100ms upon de-energisation. This timer supports a rated current of 8 A and falls under the RE8 sub-range. It offers a degree of protection rated at IP40 for the housing, IP20 for the terminal block, and IP50 for the front panel. The contacts are made from cadmium-free AgNi material, and the housing is constructed from self-extinguishing material. It utilizes a DPDT (Double Pole Double Throw) - 2C/O contacts type, with a rated impulse voltage (Uimp) of 5 kV. The supply voltage ranges from a minimum of 10.2 V to 12 V AC/DC. The display features include a green pulsing LED indicator when the relay is energised with no timing in progress (except functions Di-D), a green flashing LED indicator during timing, and a steady green LED indicator when the relay is energised with no timing in progress. It has 2 Normally Open (NO) circuits, an electrical durability of 100,000 operations for a resistive load at 250Vac and 5,000,000 operations overall. The time delay range is from 0.1s to 1h (0.1 to 3600 s). It operates within a temperature range of -20 °C to +60 °C.

ABB 2CSM204145R1341 is an analog time switch designed for modular twilight switching applications. It features a brightness range of 2 to 10000 lux and utilizes DPDT (Double Pole Double Throw) contacts, specifically 2C/O (Changeover) contacts, to facilitate its switching functions.