8118291 Festo Electric Actuators
Part#:8118291
Manufacturer:Festo
Alt. Part#:EPCS-BS-60-250-5P-A-ST-M-H1-PLK-AA
Product Lifecycle:Active
Get a quick Quote!
electric cylinder unit EPCS-BS-60-250-5P-A-ST-M-H1-PLK-AA Size: 60, Stroke: 250 mm, Stroke reserve: 0 mm, Piston rod thread: M12x1,25, Reversing backlash: 100 µm
About the manufacturer: Festo is one of the manufacturers that offers Electric Actuators that you can order at Powermatic Associates site. Festo Corp. has been a top supplier of automation and intelligent automation solutions for more than four decades in the United States and eight decades globally. The company is committed to transforming the manufacturing sector and enhancing business efficiency.
Check out the 8118291 Festo price in the box on the right side or send a quick quote.
Product Details
- KC characters KC EMC
- Vibration resistance Transport application test with severity level 1 as per FN 942017-4 and EN 60068-2-6
- Shock resistance Shock test with severity level 1 as per FN 942017-5 and EN 60068-2-27
- Logic input specification Based on IEC 61131-2, type 1
- Switching logic at outputs NPN (negative switching) PNP (positive switching)
- Max. cable length 15 m outputs 20 m for IO-Link® operation
- Input switching logic NPN (negative switching) PNP (positive switching)
- Ready status indication LED
- Characteristics of logic input Configurable Not galvanically isolated
- Power supply, connection technology M12x1, T-coded as per EN 61076-2-111
- Number of digital logic outputs 24 V DC 2
- Work range of logic input 24 V
- IO-Link®, process data content IN 1 bit (state device) 1 bit (state out)
- IO-Link®, process data width IN 2 Byte
- IO-Link®, communication mode COM3 (230.4 kBd)
- Display LED
- Parameterization interface IO-Link® User interface
- Power supply, connection pattern 00995989
- Logic interface, connection technology M12x1, A-coded as per EN 61076-2-101
- Power supply, number of pins/wires 4
- Product weight 4019 g
- IO-Link®, SIO mode support Yes
- IO-Link®, process data width OUT 2 Byte
- IO-Link®, number of ports 1
- Reversing backlash 100 µm
- Mounting position Any
- Rotor position sensor Absolute encoder, single-turn
- Max. speed 0.09 m/s
- Storage temperature -20 °C ... 60 °C
- Ambient temperature 0 °C ... 50 °C
- Max. radial force on actuator shaft 230 N
- Additional moving mass per 10 mm stroke 6.5 g
- Spindle material Roller bearing steel
- Additional functions User interface Integrated end-position sensing
- Characteristics of digital logic outputs Configurable Not galvanically isolated
- Max. current of digital logic outputs 100 mA
- Number of digital logic inputs 2
- IO-Link®, service data contents IN 32 bit force 32 bit speed
- IO-Link®, minimum cycle time 1 ms
- IO-Link®, data memory required 500 byte
- Stroke reserve 0 mm
- Spindle pitch 5 mm/U
- Design Electric actuator With integrated drive
- Rotor position sensor measuring principle Magnetic
- Repetition accuracy ±0.02 mm
- Relative air humidity 0 - 90 % Non-condensing
- Max. torque My 6.4 Nm
- Moving mass at 0 mm stroke 305 g
- Note on materials Contains paint-wetting impairment substances RoHS-compliant
- Spindle nut material Steel
- Note on ambient temperature Above an ambient temperature of 30°C, the power must be reduced by 2% per K.
- Logic interface, connection type Plug
- Max. current consumption 5300 mA
- Rotor position sensor resolution 16 bit
- IO-Link®, port class A
- IO-Link®, process data content OUT 1 bit (move in) 1 bit (quit error)
- Size 60
- Type code EPCS
- Spindle type Ball screw drive
- Homing Fixed stop block positive Reference switch
- Duty cycle 100%
- Permissible voltage fluctuations +/- 15 %
- Degree of protection IP40
- Max. torque Mx 0 Nm
- Guide value for payload, horizontal 120 kg
- Guide value for payload, vertical 46 kg
- Type of mounting With internal thread With accessories
- Logic interface, connection pattern 00992264
- Power supply, type of connection Plug
- DC nominal voltage 24 V
- Logic interface, number of poles/wires 8
- Nominal current 5.3 A
- IO-Link®, protocol version Device V 1.1
- Stroke 250 mm
- Piston rod thread M12x1.25
- Max. angle of rotation of the piston rod +/- 1 deg
- Piston rod end External thread
- Protection against torsion/guide With plain-bearing guide
- Insulation protection class B
- Corrosion resistance class (CRC) 0 - No corrosion stress
- Max. feed force Fx 900 N
- Additional weight per 10 mm stroke 69 g
- Housing material Wrought aluminum alloy, smooth-anodized
- Screw diameter 12 mm
- Motor type Stepper motor
- Symbol 00997294
- Max. acceleration 1.5 m/s²
- CE marking (see declaration of conformity) As per EU EMC directive As per EU RoHS directive
- Certification RCM compliance mark
- Max. torque Mz 6.4 Nm
- Basic weight with 0 mm stroke 2294 g
- Piston rod material High-alloy stainless steel
Product condition
New Factory Sealed
New Factory Sealed - New condition, never used, original OEM part with original packaging and factory seal.
Related documents 8118291 Specs
Manufacturer warranty
Get a quick Quote!
Request a quote, and we will send you price and availability within minutes.
Select Qty:
Average response time: 11 minutes
Worldwide Shipping and Delivery
Secure Payment Processing
Warranty
Responsive Customer Support
Got Questions? We've Got Answers!
Need more details?
Feel free to chat with us
What can I help you find today?