8083801 Festo Electric Actuators
Part#:8083801
Manufacturer:Festo
Alt. Part#:EGSS-BS-KF-32-25-8P-ST-M-H1-PLK-AA
Product Lifecycle:Active
Get a quick Quote!
mini slide unit EGSS-BS-KF-32-25-8P-ST-M-H1-PLK-AA Working stroke: 25 mm, Size: 32, Stroke reserve: 0 mm, Reversing backlash: 150 µm, Spindle diameter: 8 mm
About the manufacturer: Festo is one of the manufacturers that offers Electric Actuators that you can order at Powermatic Associates site. Festo Corp. has been a top supplier of automation and intelligent automation solutions for more than four decades in the United States and eight decades globally. The company is committed to transforming the manufacturing sector and enhancing business efficiency.
Check out the 8083801 Festo price in the box on the right side or send a quick quote.
Product Details
- KC characters KC EMC
- Switching logic at outputs PNP (positive switching)
- Shock resistance Shock test with severity level 1 as per FN 942017-5 and EN 60068-2-27
- Rotor position sensor Absolute encoder, single-turn
- Ready status indication LED
- Permissible voltage fluctuations +/- 15 %
- Power supply, connection pattern 00995989
- DC nominal voltage 24 V
- Logic input specification Based on IEC 61131-2, type 1
- Input switching logic PNP (positive switching)
- Logic interface, connection pattern 00992264
- Logic interface, connection technology M12x1, A-coded as per EN 61076-2-101
- Power supply, number of pins/wires 4
- Max. current of digital logic outputs 100 mA
- Additional functions User interface Integrated end-position sensing
- Insulation protection class B
- Vibration resistance Transport application test with severity level 1 as per FN 942017-4 and EN 60068-2-6
- Relative air humidity 0 - 90 %
- Parameterization interface IO-Link® User interface
- Rotor position sensor measuring principle Magnetic
- Power supply, type of connection Plug
- Characteristics of digital logic outputs Configurable Not galvanically isolated
- Characteristics of logic input Configurable Not galvanically isolated
- Note on ambient temperature Above an ambient temperature of 30°C, the power must be reduced by 2% per K.
- Logic interface, connection type Plug
- Number of digital logic inputs 2
- Max. current consumption 3000 mA
- IO-Link®, number of ports 1
- IO-Link®, service data contents IN 32 bit force 32 bit speed
- Display LED
- Max. cable length 15 m outputs 20 m for IO-Link® operation
- Power supply, connection technology M12x1, T-coded as per EN 61076-2-111
- Logic interface, number of poles/wires 8
- Storage temperature -20 °C ... 60 °C
- Work range of logic input 24 V
- Number of digital logic outputs 24 V DC 2
- Rotor position sensor resolution 16 bit
- Nominal current 3 A
- IO-Link®, communication mode COM3 (230.4 kBd)
- IO-Link®, minimum cycle time 1 ms
- IO-Link®, process data content IN 1 bit (state device) 1 bit (state out)
- Screw diameter 8 mm
- Type code EGSS
- Symbol 00997294
- Duty cycle 100%
- CE marking (see declaration of conformity) As per EU EMC directive As per EU RoHS directive
- Max. force Fy 991 N
- Guide value for payload, horizontal 2 kg
- IO-Link®, Connection technology Plug
- IO-Link®, port class A
- IO-Link®, protocol version Device V 1.1
- IO-Link®, process data width IN 2 Byte
- IO-Link®, process data width OUT 2 Byte
- Working stroke 25 mm
- IO-Link®, process data content OUT 1 bit (move in) 1 bit (quit error)
- Protection class III
- IO-Link®, SIO mode support Yes
- Reversing backlash 150 µm
- Size 32
- Stroke reserve 0 mm
- Motor type Stepper motor
- Position sensing Motor encoder For proximity sensor
- Degree of protection IP40
- Dynamic basic load rating, ball screw drive 2000 N
- Max. feed force Fx 60 N
- Linear guide statistical basic load rating 3880 N
- IO-Link®, data memory required 500 byte
- Spindle pitch 8 mm/U
- Mounting position Any
- Spindle type Ball screw drive
- Repetition accuracy ±0.015 mm
- Ambient temperature 0 °C ... 50 °C
- Linear guide dynamic basic load rating 2135 N
- Max. force Fz 991 N
- Max. radial force on actuator shaft 140 N
- Design Electrical mini-slide With integrated drive
- Homing Fixed stop block positive Reference switch
- Max. speed 0.19 m/s
- Corrosion resistance class (CRC) 0 - No corrosion stress
- Guide Recirculating ball bearing guide
- Max. acceleration 5 m/s²
- Certification RCM compliance mark
- Max. torque Mx 3.4 Nm
- Max. torque Mz 3.17 Nm
- Guide value for payload, vertical 2 kg
- Feed constant 8 mm/U
- Reference value, running performance 5000 km
- Additional moving mass per 10 mm stroke 12 g
- Fixed bearing dynamic basic load rating 3795 N
- Max. torque My 3.17 Nm
- Ball screw drive statistical basic load rating 3700 N
- Moving mass at 0 mm stroke 149 g
- Type of mounting With internal thread With cylindrical pin
- Guide rail material Roller bearing steel
- Maintenance interval Life-time lubrication
- Basic weight with 0 mm stroke 924 g
- Note on materials Contains paint-wetting impairment substances RoHS-compliant
- Statistical fixed bearing load rating 1792 N
- Additional weight per 10 mm stroke 30 g
- Product weight 999 g
- Slide carriage material Roller bearing steel
- Housing material Wrought aluminum alloy, anodized
- Spindle material Roller bearing steel
- Material of yoke plate Wrought aluminum alloy, anodized
- Piston rod material High-alloy stainless steel
- Spindle nut material Roller bearing steel
- Slide material Wrought aluminum alloy, anodized
Product condition
New Factory Sealed
New Factory Sealed - New condition, never used, original OEM part with original packaging and factory seal.
Related documents 8083801 Specs
Manufacturer warranty
Get a quick Quote!
Request a quote, and we will send you price and availability within minutes.
Select Qty:
Average response time: 11 minutes
Worldwide Shipping and Delivery
Secure Payment Processing
Warranty
Responsive Customer Support
Got Questions? We've Got Answers!
Need more details?
Feel free to chat with us
What can I help you find today?
