8083388 Festo Electric Actuators

Product Details

• Shock resistance
  Shock test with severity level 1 as per FN 942017-5 and EN 60068-2-27
• Relative air humidity
  0 - 90 %
• Input switching logic
  PNP (positive switching)
• Ready status indication
  LED
• Logic interface, connection technology
  M12x1, A-coded as per EN 61076-2-101
• Number of digital logic outputs 24 V DC
  2
• DC nominal voltage
  24 V
• Rotor position sensor resolution
  16 bit
• Max. current consumption
  5300 mA
• Note on ambient temperature
  Above an ambient temperature of 30°C, the power must be reduced by 2% per K.
• Insulation protection class
  B
• Permissible voltage fluctuations
  +/- 15 %
• Characteristics of digital logic outputs
  Configurable Not galvanically isolated
• Vibration resistance
  Transport application test with severity level 1 as per FN 942017-4 and EN 60068-2-6
• Power supply, type of connection
  Plug
• KC characters
  KC EMC
• Parameterization interface
  IO-Link® User interface
• Rotor position sensor
  Absolute encoder, single-turn
• Display
  LED
• Logic interface, connection type
  Plug
Power supply, connection technology
M12x1, T-coded as per EN 61076-2-111
Number of digital logic inputs
2
Work range of logic input
24 V
IO-Link®, SIO mode support
Yes
IO-Link®, process data content IN
1 bit (state device) 1 bit (state out)
IO-Link®, protocol version
Device V 1.1
IO-Link®, data memory required
500 byte
Stroke reserve
0 mm
Degree of protection
IP40
Logic input specification
Based on IEC 61131-2, type 1
Max. cable length
15 m outputs 20 m for IO-Link® operation
Homing
Fixed stop block positive Fixed stop block, negative
Position sensing
Motor encoder For proximity sensor
Characteristics of logic input
Configurable Not galvanically isolated
Logic interface, connection pattern
00992264
Guide value for payload, vertical
13 kg
Logic interface, number of poles/wires
8
Nominal current
5.3 A
IO-Link®, process data content OUT
1 bit (move in) 1 bit (quit error)
IO-Link®, process data width OUT
2 Byte
IO-Link®, Connection technology
Plug
Type code
ELGS
Guide
Recirculating ball bearing guide
Spindle type
Ball screw drive
Additional functions
User interface Integrated end-position sensing
Max. speed
0.25 m/s
Fz with theoretical service life of 100 km (from a guide perspective only)
6624 N
Max. feed force Fx
200 N
Profile material
Wrought aluminum alloy, anodized
Slide material
Die-cast aluminum
Spindle nut material
Steel
Rotor position sensor measuring principle
Magnetic
Switching logic at outputs
PNP (positive switching)
Power supply, connection pattern
00995989
Power supply, number of pins/wires
4
Guide value for payload, horizontal
20 kg
IO-Link®, process data width IN
2 Byte
IO-Link®, service data contents IN
32 bit force 32 bit speed
CE marking (see declaration of conformity)
As per EU EMC directive As per EU RoHS directive
Certification
RCM compliance mark
Fy with theoretical service life of 100 km (from a guide perspective only)
2208 N
Max. torque Mz
31.8 Nm
My with theoretical service life of 100 km (from a guide perspective only)
117 Nm
Product weight
5922 g
Static deflection (load at standstill)
0.1 % of axis length
Note on materials
Contains paint-wetting impairment substances RoHS-compliant
Spindle material
Steel
Max. current of digital logic outputs
100 mA
Storage temperature
-20 °C ... 60 °C
IO-Link®, minimum cycle time
1 ms
IO-Link®, communication mode
COM3 (230.4 kBd)
IO-Link®, port class
A
Size
60
Screw diameter
12 mm
Mounting position
Any
Motor type
Stepper motor
Temperature monitoring
Shutdown in the event of over temperature Integrated precise CMOS temperature sensor with analogue output
Repetition accuracy
±0.01 mm
Ambient temperature
0 °C ... 50 °C
2nd moment of area Iy
441000 mm⁴
Max. force Fz
1800 N
Mz with theoretical service life of 100 km (from a guide perspective only)
117 Nm
Torsion moment of inertia It
29800 mm⁴
Dynamic deflection (load moved)
0.05% of axis length, maximum 0.5 mm
Cover strip material
High-alloy stainless steel
Protection class
III
IO-Link®, number of ports
1
Working stroke
600 mm
Spindle pitch
12 mm/U
Max. force Fy
600 N
Mx with theoretical service life of 100 km (from a guide perspective only)
107 Nm
Moving mass
525 g
Guide rail material
Steel
Design
Electromechanical linear axis With integrated drive
Symbol
00997292
Max. acceleration
5 m/s²
Duty cycle
100%
2nd moment of area Iz
542000 mm⁴
Max. torque My
31.8 Nm
Max. torque Mx
29.1 Nm
Feed constant
12 mm/U
Material of end caps
Die cast aluminum, painted
Slide carriage material
Steel
Drive cover material
Die cast aluminum, painted

Related documents 8083388 Specs