8000102 Festo Pressure Sensors

Name: 8000102
Brand: Festo

Part#:8000102

Manufacturer:Festo

Alt. Part#:SPTW-P2R-G14-A-M12

Product Lifecycle:Active

Get a quick Quote!

pressure transmitter SPTW-P2R-G14-A-M12 Authorisation: (* RCM Mark, * c UL us - Listed (OL)), CE mark (see declaration of conformity): to EU directive for EMC, Materials note: (* Contains PWIS substances, * Conforms to RoHS), Measured variable: Relative p

About the manufacturer: Festo is one of the manufacturers that offers Pressure Sensors that you can order at Powermatic Associates site. Festo Corp. has been a top supplier of automation and intelligent automation solutions for more than four decades in the United States and eight decades globally. The company is committed to transforming the manufacturing sector and enhancing business efficiency.

Check out the 8000102 Festo price in the box on the right side or send a quick quote.

Product Details

Type code
SPTW
Note on materials
Contains paint-wetting impairment substances RoHS-compliant
Temperature of medium
0 °C ... 80 °C
Electrical connection
4-pin Round design
Mounting position
Any
Symbol
00991968
CE marking (see declaration of conformity)
As per EU EMC directive
Pressure measuring range end value
2 bar
Ambient temperature
0 °C ... 80 °C
Reverse polarity protection
for operating voltage
Pneumatic connection
G1/4
Degree of protection
IP67
Measured variable
Relative pressure
Pressure measuring range initial value
0 bar
Repetition accuracy in ± %FS
0.1 %FS
Short-circuit protection
yes
Material of plug housing
PA
Corrosion resistance class (CRC)
4 - Particularly high corrosion stress
Max. overload pressure
4 bar
Accuracy in ± % FS
1 %FS

Analog output

4 - 20 mA

Type of mounting

Optionally: With accessories

Materials in contact with the media

High-alloy stainless steel

Certification

RCM compliance mark c UL us - Listed (OL)

Method of measurement

Piezoresistive pressure sensor

Operating medium

Compressed air as per ISO 8573-1:2010 [-:-:-] Gaseous media

Linearity error in ± % FS

0.5 %FS

DC operating voltage range

8 V ... 30 V

Housing material

PA High-alloy stainless steel

Product weight

80 g

Product condition

New Factory Sealed

New Factory Sealed - New condition, never used, original OEM part with original packaging and factory seal.

Relevant products

31310

Verified stock: 90

pneumatic valve VL-5/3B-1/8-B 5/3-way function, centre position pressurised Valve function: 5/3 pressurised, Type of actuation: pneumatic, Width: 26 mm, Standard nominal flow rate: 1000 l/min, Operating pressure: -0,9 - 10 bar

Festo

1206623

Verified stock: 14

silencer AMTE-M-H-G14 Suitable for reducing noise at the exhaust ports of pneumatic systems. Assembly position: Any, Container size: 20, Operating pressure: 0 - 10 bar, Flow rate to atmosphere: 1000 l/min, Operating medium: Compressed air in accordance wi

Festo

12639

Verified stock: 7

silencer U-1/4-B-NPT For reducing noise and avoiding contamination at the exhaust ports of pneumatic components. Assembly position: Any, Operating pressure complete temperature range: 0 - 10 bar, Flow rate to atmosphere: 3000 l/min, Operating medium: Comp

Festo

1707427

Verified stock: 8

silencer UC-3/8 Assembly position: Any, Container size: 1, Operating pressure: 0 - 10 bar, Flow rate to atmosphere: 5000 l/min, Operating medium: Compressed air in accordance with ISO8573-1:2010 [7:-:-]

Festo

160236

Verified stock: 6

air reservoir CRVZS-2 Volume: 2 l, Assembly position: Any, Conforms to standard: AD 2000 reference sheet, Operating pressure: -0,95 - 16 bar, Authorisation: (* CRN, * TÜV)

Festo

What can I help you find today?

Recommended parts

UBC10.241

PULS UBC10.241 is an Uninterruptible Power Supply (UPS) control module within the U-series, featuring a built-in battery with a 50% power reserve and a green status LED. This module is housed in aluminium and utilizes spring-clamp connections for installation. It measures W123mm x H124mm x D119mm and operates on a supply voltage range of 22.5Vdc to 30Vdc, with a nominal 24Vdc. The rated current is 10A at 22.5Vdc and can reach up to 15A in buffer mode for less than 5 seconds at full output voltage. It supports DIN rail mounting and can operate in ambient air temperatures ranging from 0 to +40°C. The current consumption is 1.1A at a 24Vdc input, and it is designed for DC networks. Visual position indicators include Ready, Buffering, Inhibit, and Replace Battery. Protection functions include output overvoltage protection with a typical 32Vdc and a maximum of 35Vdc, and overload/short-circuit protection with a minimum of 17.9A and a maximum of 21A at load impedance. It is advised not to use the DC-UPS in parallel to increase output power, but paralleling two units for 1+1 redundancy is possible for higher system reliability. The output voltage is regulated at 22.5Vdc in buffer mode with a 23Vdc turn-ON. The efficiency is rated at 0.978 with a 24Vdc input, and the rated power is 360W at 24Vdc and 240W/360W in buffer mode. Power dissipation/losses are 2.9W with a 24Vdc input at 0A output current and 5.5W at 10A output current. Ripple is maintained at 20mVpp across a frequency range of 20Hz to 20MHz at 50Ω. The electrical durability is rated at 137400 hours at 40°C with a 10A output and 24Vdc input, equivalent to 15 years or 131400 hours at both 40°C with a 5A output and 25°C with a 10A output.

Puls

MG17416

Schneider Electric MG17416 is a Miniature Circuit Breaker (MCB) designed as a supplementary protector within the C60 UL1077 sub-range. It features a rated current of 15A and operates on a single pole (1 Pole(s)) configuration. The rated operating voltage (Ue) for this MCB is 277 V. It offers a short circuit breaking rating of 10kA AIR at 240Vac, 5kA AIR at 277Vac, and 10kA AIR at 65Vdc, with protection extended to 1 Pole(s). The tripping curve for this device is classified as type C.

Schneider Electric

CS5.241

PULS CS5.241 AC/DC Power Supply, 5A, 120W, 24DC output, 100-120 VAC input

Puls

DKF 28-27-1

DKF 28-27-1 Turck - DKF 28-27-1 Actuator and Sensor Receptacle, Front Mount

Turck

222

G10S0000

Red Lion G10S0000 is an HMI / Display unit from the HMI Rugged Graphite series designed for both indoor and outdoor use. It features an HMI operator touchscreen panel with a connection interface that includes 1 x RJ45 port for Ethernet, 2 x RJ11 ports for RS-232, and 1 x RJ45 port supporting both RS-422 and RS-485 communication protocols. The unit operates on a supply voltage range of 10-30Vdc, accommodating both 12Vdc and 24Vdc systems. It is engineered to function within an ambient air temperature range of -20 to +60 °C and offers a degree of protection rated at IP66 and NEMA 4X. The G10S0000 is equipped with 7 module slots for connection capacity, and its power consumption is typically 18 W, with a maximum of 53 W. The electrical durability of the backlight is rated at 35,000 hours. For storage, it includes an SD card slot, and it boasts a brightness level of 2500cd/m2.

Red Lion

S29371

Square D by Schneider Electric S29371 is a locking device designed for fixed OFF or ON locking. It functions as a padlocking device, ensuring secure locking capabilities. The dimensions of this part are a net width of 60 mm, a net height of 21 mm, and a net depth of 59 mm.

Schneider Electric