547186 Festo Directional Control Valves

Product Details

• Nominal width
  9 mm
• Changeover time
  35 ms
• Pilot pressure MPa
  0.3 MPa ... 1 MPa
• Standard nominal flow rate
  1000 l/min
• Reset method
  Mechanical spring
• Sealing principle
  Soft
• Manual override
  Non-detenting
• Signal status display
  LED
• Flow rate of pneumatic valve on individual sub-base
  1100 l/min
• Optimized flow rate of pneumatic valve pneumatically concatenated flow
  1000 l/min
• Permissible voltage fluctuations
  -15 % / +10 %
• Lap
  Overlap
• Valve size
  26 mm
• Design
  Piston gate valve
• Mounting position
  Any
• Flow direction
  Non-reversible
• On switching time
  23 ms
• Temperature of medium
  -5 °C ... 50 °C
• Product weight
  305 g
• Auxiliary pilot air port 14
  Sub-base, size 26 mm as per ISO 15407-1
Note on materials
RoHS-compliant
Conforms to standard
ISO 15407-1 VDMA 24563
Pilot air supply port
Internal
Flow rate of pneumatic valve
1400 l/min
Coil characteristics
110 V AC: 50/60 Hz, initial power 2.9 VA, holding power 2.1 VA
Corrosion resistance class (CRC)
0 - No corrosion stress
Ambient temperature
-5 °C ... 50 °C
Auxiliary pilot air port 12
Sub-base, size 26 mm as per ISO 15407-1
Pneumatic connection 3
Sub-base, size 26 mm as per ISO 15407-1
Pilot interface
as per ISO 15218
Seals material
HNBR NBR
Operating pressure
3 bar ... 10 bar
Operating voltage
110V AC
Exhaust air function
With flow control option
Symbol
00991080
Operating medium
Compressed air as per ISO 8573-1:2010 [7:4:4]
Vibration resistance
Transport application test with severity level 2 as per FN 942017-4 and EN 60068-2-6
Noise level
85 dB(A)
Electrical connection
Form C as per DIN EN 175301-803
Pneumatic connection 2
Sub-base, size 26 mm as per ISO 15407-1
Pneumatic connection 5
Sub-base, size 26 mm as per ISO 15407-1
Valve function
5/3, closed
Actuation type
Electrical
Pneumatic working port
Sub-base, size 26 mm as per ISO 15407-1 G1/4
Degree of protection
IP65 NEMA 4
Type code
VSVA
Type of control
Pilot-controlled
Pilot pressure
3 bar ... 10 bar
Switching time off
58 ms
Duty cycle
100%
Information on operating and pilot media
Operation with oil lubrication possible (required for further use)
Shock resistance
Shock test with severity level 2 as per FN 942017-5 and EN 60068-2-27
Pilot medium
Compressed air as per ISO 8573-1:2010 [7:4:4]
Type of mounting
On sub-base
Pilot exhaust air port 82/84
Not ducted as per standard Ducted
Housing material
Die-cast aluminum
CE marking (see declaration of conformity)
As per EU low voltage directive
Relative air humidity
0 - 90 %
Max. tightening torque for valve mounting
2 Nm
Pneumatic connection 1
Sub-base, size 26 mm as per ISO 15407-1
Pneumatic connection 4
Sub-base, size 26 mm as per ISO 15407-1
Material of screws
Steel Galvanized

Related documents 547186 Specs