547185 Festo Directional Control Valves

Product Details

• Pilot pressure MPa
  0.3 MPa ... 1 MPa
• Standard nominal flow rate
  450 l/min
• Degree of protection
  IP65 NEMA 4
• Sealing principle
  Soft
• Pilot air supply port
  Internal
• Signal status display
  LED
• Optimized flow rate of pneumatic valve pneumatically concatenated flow
  450 l/min
• Flow rate of pneumatic valve
  650 l/min
• Operating pressure
  3 bar ... 10 bar
• Pneumatic working port
  Sub-base, size 18 mm as per ISO 15407-1 G1/8
• Nominal width
  5 mm
• Exhaust air function
  With flow control option
• Type of control
  Pilot-controlled
• Conforms to standard
  ISO 15407-1 VDMA 24563
• Pilot pressure
  3 bar ... 10 bar
• Switching time off
  30 ms
• Operating medium
  Compressed air as per ISO 8573-1:2010 [7:4:4]
• Corrosion resistance class (CRC)
  0 - No corrosion stress
• Product weight
  174 g
• Auxiliary pilot air port 12
  Sub-base, size 18 mm as per ISO 15407-1
Pneumatic connection 2
Sub-base, size 18 mm as per ISO 15407-1
Pilot interface
as per ISO 15218
Flow rate of pneumatic valve on individual sub-base
500 l/min
On switching time
18 ms
Coil characteristics
110 V AC: 50/60 Hz, initial power 2.9 VA, holding power 2.1 VA
Vibration resistance
Transport application test with severity level 2 as per FN 942017-4 and EN 60068-2-6
Noise level
85 dB(A)
Type of mounting
On sub-base
Pneumatic connection 1
Sub-base, size 18 mm as per ISO 15407-1
Pneumatic connection 3
Sub-base, size 18 mm as per ISO 15407-1
Material of screws
Steel Galvanized
Lap
Overlap
Valve size
18 mm
Design
Piston gate valve
Type code
VSVA
Mounting position
Any
Manual override
Non-detenting
Symbol
00991082
Flow direction
Non-reversible
Changeover time
20 ms
CE marking (see declaration of conformity)
As per EU low voltage directive
Ambient temperature
-5 °C ... 50 °C
Pilot exhaust air port 82/84
Not ducted as per standard Ducted
Pneumatic connection 5
Sub-base, size 18 mm as per ISO 15407-1
Housing material
Die-cast aluminum
Valve function
5/3, exhausted
Actuation type
Electrical
Operating voltage
110V AC
Reset method
Mechanical spring
Duty cycle
100%
Information on operating and pilot media
Operation with oil lubrication possible (required for further use)
Temperature of medium
-5 °C ... 50 °C
Max. tightening torque for valve mounting
1 Nm
Electrical connection
Form C as per DIN EN 175301-803
Note on materials
RoHS-compliant
Permissible voltage fluctuations
-15 % / +10 %
Shock resistance
Shock test with severity level 2 as per FN 942017-5 and EN 60068-2-27
Relative air humidity
0 - 90 %
Pilot medium
Compressed air as per ISO 8573-1:2010 [7:4:4]
Auxiliary pilot air port 14
Sub-base, size 18 mm as per ISO 15407-1
Pneumatic connection 4
Sub-base, size 18 mm as per ISO 15407-1
Seals material
HNBR NBR

Related documents 547185 Specs