547093 Festo Directional Control Valves

Product Details

• Reset method
  Pneumatic spring
• Actuation type
  Electrical
• Exhaust air function
  With flow control option
• Manual override
  Non-detenting
• Flow direction
  Non-reversible
• Duty cycle
  100%
• Shock resistance
  Shock test with severity level 2 as per FN 942017-5 and EN 60068-2-27
• Noise level
  85 dB(A)
• Pilot medium
  Compressed air as per ISO 8573-1:2010 [7:4:4]
• Auxiliary pilot air port 14
  Sub-base, size 18 mm as per ISO 15407-1
• Pneumatic connection 5
  Sub-base, size 18 mm as per ISO 15407-1
• Note on materials
  RoHS-compliant
• Lap
  Overlap
• Standard nominal flow rate
  400 l/min
• Degree of protection
  IP65 NEMA 4
• Sealing principle
  Soft
• Pilot air supply port
  Internal
• Pilot pressure
  3 bar ... 10 bar
• On switching time
  13 ms
• Permissible voltage fluctuations
  -15 % / +10 %
Information on operating and pilot media
Operation with oil lubrication possible (required for further use)
Relative air humidity
0 - 90 %
Max. tightening torque for valve mounting
1 Nm
Auxiliary pilot air port 12
Sub-base, size 18 mm as per ISO 15407-1
Pilot interface
as per ISO 15218
Seals material
HNBR NBR
Pilot pressure MPa
0.3 MPa ... 1 MPa
Operating voltage
24V AC
Type code
VSVA
Signal status display
LED
Temperature of medium
-5 °C ... 50 °C
Type of mounting
On sub-base
Pilot exhaust air port 82/84
Not ducted as per standard Ducted
Pneumatic connection 4
Sub-base, size 18 mm as per ISO 15407-1
Operating pressure
2 bar ... 10 bar
Pneumatic working port
Sub-base, size 18 mm as per ISO 15407-1 G1/8
Mounting position
Any
Type of control
Pilot-controlled
Flow rate of pneumatic valve
600 l/min
Optimized flow rate of pneumatic valve pneumatically concatenated flow
400 l/min
Operating medium
Compressed air as per ISO 8573-1:2010 [7:4:4]
Corrosion resistance class (CRC)
0 - No corrosion stress
Product weight
174 g
Pneumatic connection 1
Sub-base, size 18 mm as per ISO 15407-1
Pneumatic connection 2
Sub-base, size 18 mm as per ISO 15407-1
Housing material
Die-cast aluminum
Valve function
2x3/2, open/closed, monostable
Valve size
18 mm
Design
Piston gate valve
Nominal width
5 mm
Conforms to standard
ISO 15407-1 VDMA 24563
Symbol
00992808
Flow rate of pneumatic valve on individual sub-base
450 l/min
Switching time off
21 ms
Coil characteristics
24 V AC: 50/60 Hz, initial power 3.1 VA, holding power 2.3 VA
Vibration resistance
Transport application test with severity level 2 as per FN 942017-4 and EN 60068-2-6
Ambient temperature
-5 °C ... 50 °C
Electrical connection
Form C Without PE conductor
Pneumatic connection 3
Sub-base, size 18 mm as per ISO 15407-1
Material of screws
Steel Galvanized

Related documents 547093 Specs